ZigBee 3.0 Wireless Push Button Smart Scene Switch Controller User Manual

ZigBee 3.0 Wireless Push Button Smart Scene Switch Controller

Informații despre produs

Caracteristici

• Poate fi controlat de telefonul iOS/telefonul Android
• Support “Smart Life” and “Tuya Smart” APP
• Voice control: Compatible with Alexa and Google home T mall Genie or Xiaodu speakers
• Funcție de temporizare: pornire/oprire automată cu funcție de temporizare
• Protecție la suprasarcină pentru înlocuirea ușoară a întrerupătoarelor mecanice tradiționale (necesită neutru)
• Scenă inteligentă
• Grup de dispozitive

Informații de securitate

Risk of electric shock: Electricity can cause personal injury and properly damage if not handled properly. If you are unsure of any part of these instructions, seek professional help from a qualified electrician.

Instala

Observa:

• Asigurați-vă că întrerupătorul este oprit înainte de cablare.
• Neutral wire is required. Verify that the wall box contains a neutral wire (usually white). If the wall box does not have a neutral wire, try another location in the home or call a professional electrician to install the switch.
• Culorile firelor indicate în acest manual sunt culorile obișnuite și pot varia în unele case.
• Make sure the wire conductors are securely attached to each screw.
• Asigurați-vă că semnalul Wi-Fi este stabil și funcționează corect înainte de cablare.
• Dacă nu aveți experiență în cablare, vă rugăm să apelați un electrician profesionist.

Primul pas:

• Opriți întrerupătorul și testați puterea cu un tester electric.
• Asigurați-vă că întrerupătorul este oprit înainte de cablare.

Al doilea pas:

• Remove existing wall panels; turn on power at breaker and use electrical tester to check which wire is the line; the tester will beep when near the line.
• Turn off the power at the circuit breaker; if there is a power outage, use an electrical tester, pull the existing switch out; mark the wiring and other wires; disconnect the power with pliers and remove the wires from the existing switch.
• Connect the switch wires to the wall box with the wire conductors according to the wiring diagram below.
• Al treilea pas: Install the switch using the screws provided and snap the wall plate onto it.
• Al patrulea pas: Reporniți alimentarea la întrerupător, apoi aprindeți luminile.

Schema de cablare

The Live wire is connected to the “L” terminal, The Neutral wire is connected to the “N” terminal, Lighting wire is connected to “L1, L2, L3” terminals.

1. Gang switch lighting wire connection: “L1” terminal
2. Gang switch lighting wire connection: “L1,L2” terminals
3. Gang switch lighting wire connection: “L1,L2,L3” terminals

Adăugați dispozitivul

Add device to “Smart Life” or “Tuya Smart” APP

1. Step 1: Download and install the “Smart Life” or “Tuya Smart” APP: Scan the QR code below
   
2. Step 2: Enter the phone settings option, turn on the Bluetooth and WiFi functions, and turn on the product at the same time
3. Step 3: Open the Smart Life APP, register and log in your account, if you have a Smart Life account, just log in.
4. Step 4: Power on after the wiring is completed, the device is powered on by default, press and hold the touch wall switch button for about 8, until the WiFi blue LED flashes quickly, enter the network configuration mode
5. Step 5: Enter the App, click the “+” at the top right of the page to enter the network connection page.
6. Step 6: Make sure your device’s light is blinking quickly(2 times per second) tap to proceed to the next steр.
7. Step 7: Enter your WiFi and password
8. Step 8: Name your device.
9. Step 9: When the WiFi LED is on, the device is online.
   Preia controlul acum!

How to use smart speakers to control devices, such as Amazon Alexa, Google Assistant or T mall Genie?
Open the Smart Life app to enter the “Me” view and find the user Quide for “Me” view and find the user guide the corresponding smart speaker

【Note: Before using the smart speaker, please log in to your account on Amazon Alexa Google Assistant, or T mall Genie.]

Introduction of RF remote control operation

Packaged products are paired at the factory and do this wirelessly. If you need to add or replace the remote control switch, please refer to the following steps

Metoda de împerechere
Press and hold the touch wall switch button for about 3 seconds. The red LED indicator lights up to enter the RF433 pairing mode. At this time, press the RF433 remote control switch a few times and the indicator light flashes off. The switch is controlled and paired successfully.

Metoda de ștergere a codului

Long press the touch wall switch button for 5 seconds until the red LED indicator flashes 3 times, the code is cleared successfully.