YAHA BME688 Temperature Humidity Sensor Module
Specificații
| Caracteristică | Caietul de sarcini |
| Pachet | LGA 3.0 * 3.0 * 0.93 mm³ |
| Detection Support | Barometric pressure, environmental temperature, relative humidity, VOC gas change detection. Applicable to various additional gases (VSC, carbon monoxide, hydrogen, etc.) + Multi-gas differentiation + Artificial intelligence (requires secondary development). |
| Performanța cheie | Includes all BME680 capabilities. BME AI Studio tool allows training the gas scanner for specific applications (home routers, IoT, smart homes). Development kit allows testing/development based on temperature, humidity, pressure, and gas sensing. |
| Power & Current | Sleep mode: 0.15 µA. In standard gas scan mode: 3.96 mA (configurable between 0.1–12 mA in BME AI Studio). |
| Precizie | ±15% ±15 Indoor Air Quality (IAQ) s2s deviation; Humidity: ±3%; Pressure: ±0.6 hPa absolute accuracy (300–1100 hPa, 0–65°C); Temperature: ±0.5 at 25°C. |
| Domeniul de măsurare | Temperature: -40 to 85°C; Barometric pressure: 300–1100 hPa; Humidity: 0–100%; IAQ: 0–500 (equivalent to 0.2–20 mg/m³ TVOC level). |
Descriere
- The BME688 Environmental Sensor Module is an advanced multi-sensor designed to monitor air quality, temperature, humidity, and atmospheric pressure. Available at Burk.pk, this module is perfect for smart home automation, air purifiers, and IoT environmental monitoring projects.
- This sensor module uses cutting-edge MEMS technology to detect volatile organic compounds (VOCs), giving you real-time air quality data. It accurately tracks temperature and humidity, while also measuring barometric pressure. As a result, it helps improve indoor air comfort and safety.
- With both I2C and SPI interfaces, the BME688 Environmental Sensor Module integrates easily with microcontrollers such as Arduino, Raspberry Pi, ESP32, and others. Its low power consumption makes it ideal for battery-operated devices.
- The compact design of this module ensures easy integration in space-constrained applications. Moreover, it delivers stable and fast sensor readings, enabling real-time environment tracking and automated control.
- In addition, the BME688 comes with an onboard gas sensor and supports Bosch’s AI algorithm for enhanced gas detection accuracy. This makes it suitable for detecting pollution, smoke, or chemical leaks in residential or industrial setups.
- To sum up, the BME688 Environmental Sensor Module provides accurate, multi-parameter environmental sensing in a compact, easy-to-use package. Get it today from Burk.pk and build smarter, healthier environments with confidence.
Pachetul include
- 1 x BME688 environmental sensor module
- 1 x Connecting Wire
Caracteristică
- Support I2C communication and setting up the slave address.
- Support SPI communication, default is I2C interface, which can be set to SPI via an I/O port.
- Vol. La bordtage translator, compatible with 3.3V/5V operating level.
- Vine cu resurse de dezvoltare online și manual (exampfișiere pentru Raspberry Pi / Raspberry Pi Pico / Arduino / ESP32).
Sfaturi de siguranță:
- Do not operate the module above its rated voltage (maxim 3.6V).
- Avoid placing the sensor near heat sources or direct sunlight.
- Do not expose to corrosive gases or liquids.
- Handle the module carefully to avoid damaging small components.
- Ensure correct wiring before powering the system.
- Do not short circuit the pins during installation.
- Țineți departe de high-voltage circuite.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Senzorul nu a fost detectat | Wrong wiring or address | Check SDA/SCL connections and I2C address |
| Nicio ieșire de date | Missing pull-up resistors | Add 4.7kΩ resistors on SDA/SCL |
| Citiri incorecte | Fără timp de încălzire | Allow sensor to stabilize for a few minutes |
| Gas values not changing | Heater not enabled | Enable gas measurement in library |
| Eroare de comunicare I2C | Conexiune slabă | Recheck wiring and solder joints |
| Extremely high temperature reading | Self-heating effect | Add software offset correction |
| Humidity stuck at value | Sensor saturation | Improve airflow around sensor |
| Dispozitivul nu pornește | No VCC supply | Verify 3.3V power input |
Documente/Resurse
 | BME688 Temperature Humidity Sensor Module |
Referințe
- Manual de utilizaremanual.tools
Published: June 21, 2026
Actualizat: 22 iunie 2026