VTOPEK CVBS spate auto View Camera inversă
Contur
Thank you for using our products ,the use of this product, please read the instruction manual to ensure proper use of this product .Manual should be kept for later use.
Notă elementul
- This product is a 12V voltage.
- When installing the product, be sure to use the specified drill, screws .etc.
- Removal of connector ,terminal type ,do not pull harness
- To avoid damage to the camera function. the use must be approached carefully ,do not have a strong impact or improper repair and reconstruction.
About monitor settings
*Before installing the car camera, please confirm that your monitor channel is set to CVBS/NTSC
Set the CVBS System, Go to Car Setting» Factory Setting» Reverse (Picture) Setting» Select CVBS NTSC
Schema de instalare
- A. Monitor position
- B. Camera installation location
Note: The red line is the wiring diagram of the camera extension cable
Spate view aparat de fotografiat
Note: if the monitor is android dvd or stereo radio. you need 6m cable red trigger wire A and B:
- A connect reverse lights power D C12+V
- B connect to DVD trigger w1re
About Dynamic Trajectory Camera
The dynamic trajectory rotates as the car swings not just by turning the steering wheel
Dynamic Trajectory
Documente/Resurse
 |
VTOPEK CVBS spate auto View Camera inversă [pdfManual de utilizare CVBS spate auto View Reverse Camera, CVBS, Car Rear View Reverse Camera, Rear View Reverse Camera, View Reverse Camera, Reverse Camera, Camera |