Difuzor tip matrice liniară TAKSTAR ESA-036

Introducere

Introducing the ESA-036 line array speaker, paired with the ESA-151 subwoofer. Designed for amplification scenarios such as medium to small- to small-sized banquet halls, multi-purpose halls, sports arenas, and large conference rooms, this system provides high sensitivity, powerful sound, and focused coverage. Unlike traditional “point source” speakers that experience a 6dB attenuation for every doubling of distance, this linear array design reduces attenuation to just 3dB, making it suitable for large venues with many audiences. Read this manual thoroughly before use to have a better understanding of the product. If you have any questions or suggestions, please contact our local sales outlet.

Caracteristici

ESA-036

• Composed of six 3″ paper cone woofers + six 3″ aluminum-magnesium alloy tweeters.
• Fatigue-resistant elastic woofer spider surround for quick response and wide dynamics.
• Aluminum-magnesium tweeter diaphragm for bright, smooth, detailed highs.
• Tweeter array for controlled vertical dispersion and near-linear summation over distance.
• Symmetrical design magnetic circuit results in low harmonic distortion.
• Low-loss crossover capacitors (CBB/PET) and inductors (OFC air-core) for stable sound quality.
• Trapezoidal enclosure with acoustic batting reduces standing waves for cleaner midrange.
• Compact and adjustably mounted via flybars and latches from -2° to 0° to 10° in 7 steps for optimized venue coverage.

ESA-151

• Single 15″ paper cone low-frequency driver with 100mm voice coil.
• Cone with fatigue-resistant cloth surround delivers deep, powerful lows.
• Symmetrical design magnetic circuit results in low harmonic distortion.
• Long excursion voice coil provides high transducer efficiency.
• Reflex port design with precise acoustic modeling ensures high bass efficiency and response times.
• Compact enclosure connects easily with aluminum flybars for flexibility in determining the number of units based on venue size.

Aplicații
Medium to small-sized banquet halls, multi-purpose halls, sports arenas, and large conference rooms.

Instrucțiuni de operare

Wiring Speaker & Power Amp

1. Left and right channel each consists of two subwoofers (80 impedance each) and four full-range line array speakers.
2. Connect two full-range speakers (120 impedance each) in parallel using one cable for a combined impedance of 60.
3. Use two 300W dual-channel amplifiers (set to bridged mono mode), and connect a pair of full-range speakers to one channel of the ampmai în viață.
4. Connect one subwoofer speaker to one channel of two 1000W dual-channel amplifiers (set to bridged mono mode).
5. Connect the subwoofers using a two-core speaker cable, using the red wire for positive (1+) and the black wire for negative (1-).
6. Connect the full-range speakers using a two-core speaker cable, using the red wire for positive (1+) and the black wire for negative (1-).

Diagrama de conectare sistem

1. Coverage angles for two types of installation:
2. Rigging and caster wheel mounting:

Atenționări

1. To ensure safe suspension, do not exceed a maximum of 16 full-range speakers on one side.
2. Ensure proper matching of power and impedance between the power amplifier and speakers. Mismatched combinations can result in equipment damage or poor sound quality.
3. Installation of the speakers should be carried out by professional technicians, ensuring secure fixation and placement in areas that are not easily accessible.
4. During use, position the speakers with the tweeter horn facing the audience area to achieve an optimal sound experience.
5. Handle the speakers with care during transportation to prevent impact or damage.
6. After use, secure the locking pins and connecting rods on the speakers to prevent loss.

Specificații

Nota: the above data are measured by Takstar Laboratory, which has the final interpretation right!

Conținutul pachetului

Instrucțiuni de siguranță
To avoid electric shock, overheat, fire, radiation, explosion, mechanical risk and injury, or property loss due to improper use, please read and observe the following items before use:

1. Please check if the power of the connected equipment matches that of this product before operation.
2. Adjust the volume to the proper level during operation. Do not operate at over-power or high-volume levels for extended periods to avoid product malfunction or hearing impairment.
3. If there is any abnormality during use (e.g., smoke, strange odor), please turn off the power switch and unplug from the power source, then send the product to the local after-sales service for repair.
4. Păstrați acest produs și accesoriile sale într-o zonă uscată și ventilată. Nu depozitați într-o zonă umedă sau cu praf pentru o perioadă lungă de timp.
5. Țineți departe de foc, ploaie, pătrunderea lichidului, lovirea, aruncarea, vibrarea sau blocarea oricăror orificii de ventilație, pentru a preveni defecțiunile.
6. Produsul trebuie, atunci când este instalat pe pereți sau pe tavan, să fie fixat ferm pe loc la o rezistență adecvată pentru a preveni căderea acestuia.
7. Vă rugăm să respectați regulile de siguranță în timpul funcționării. Nu utilizați produsul în locuri interzise de legi sau reglementări pentru a evita accidentele.
8. Nu dezasamblați sau reparați singur produsul pentru a evita rănirea. Dacă aveți întrebări sau aveți nevoie de orice servicii, vă rugăm să contactați serviciul nostru post-vânzare local.

Guangdong Takstar Electronic Co., Ltd.
Adresă: No. 2 Fu Kang Yi Rd., Longxi Boluo Huizhou, Guangdong 516121 China
Tel: 86 752 6383644
Fax: 86 752 6383952
E-mail: sales@takstar.com
Website: www.takstar.com

Documente/Resurse

Difuzor tip matrice liniară TAKSTAR ESA-036 [pdfManual de instrucțiuni ESA-036, Difuzor linie array ESA-036, Difuzor linie array, Difuzor matrice, Difuzor

Referințe

• Manual de utilizare