Roth QuickTemp Compact System
Specificațiile produsului
- Dimensiuni: 61 cm x 61 cm x 40 cm
- Maximum load: 2mm per meter
- Se cere asamblare
Planlæg hvordan Compact pladerne skal udlægges. OBS. 
Always read the full documentation
Aspirați podeaua. 
Split the turn plate and lay it first.
Șanțurile dintre plăci trebuie să fie aliniate.
Cut plates from the back, remove any burrs.
Folosiți plăci de transfer pentru țevile de alimentare/pentru umplerea golurilor.
Vacuum before installation of pipes.
Instalați țeava strâns/aproape de cercul interior în viraje.
Instalați țevile și efectuați testul de presiune.
Vacuum before installation of flooring underlayment
Flooring underlayment. Avoid overlapping.
Lay wood floor at a 90° angle to pipes.
- ROTH DANMARK A/S · Tlf. +45 47 38 01 21 ·
- E-mail: service@roth-danmark.dk · roth-danmark.dk
- ROTH SVERIGE AB · Tel. +46 40 53 40 90 ·
- E-mail: service@roth-sverige.se · roth-sverige.se
- ROTH NORGE AS · Tel. +47 67 57 54 00 ·
- E-mail: service@roth-norge.no · roth-norge.nr
- ROTH FINLAND OY · Puh. +358 (0)19 440 330 ·
- S-posti: service@roth-finland.fi · roth-finlanda.fi
- ROTH UK Ltd. · Phone +44 (0) 1905 453424 ·
- E-mail: enquiries@roth-uk.com · roth-uk.com
Etape de instalare
- Place component A on a flat surface with dimensions 61 cm x 61 cm.
- Attach component B to component A using the provided screws (X mm).
- Ensure that the maximum load of 2mm per meter is not exceeded.
- Connect component C to the assembly following the designated markings.
- Secure all components in place as per the assembly diagram.
- Continue adding components in the specified order until the structure is complete.
- Check for stability and make adjustments if necessary.
- Your product is now ready for use!
Întrebări frecvente
Care este capacitatea maximă de încărcare a produsului?
The maximum load capacity is 2mm per meter.
Am nevoie de instrumente suplimentare pentru asamblare?
The assembly requires screws (X mm) provided with the product. No additional tools are necessary.
Produsul poate fi dezasamblat pentru depozitare?
Yes, the product can be disassembled following the reverse order of the installation steps.
Documente/Resurse
 |
Roth QuickTemp Compact System [pdfGhid de instalare QuickTemp Compact System, QuickTemp, Compact System, System |