Pst Tracking System Software
Pesteview
Install the PST client software first, then set up and connect the PST hardware, and finally initialize the PST client for first use.
Specificații
| Suport pentru trepied | 1/4-20 UNC (bottom or back, depending on type) |
| Interval de temperatură de funcționare | 15 ° C la 35 ° C (59 ° F la 95 ° F) |
| Power input (via wall socket) | 110–240 V |
| Standard PST connection | USB-B port; use a USB 2.0 Hi-Speed capable port |
| PST HD / Pico connection | Two USB cables; use a USB 3.0 SuperSpeed or faster port |
Setup and Use Steps
- Do not plug in the PST before installing the client software.
- Introduceți stick-ul USB al software-ului PST în computer.
- Fugi
pst-setup-#-Windows-x*-Release.exe(unde#is the version number and*is 86 for 32-bit or 64 for 64-bit). - Select desired options and complete the software setup (it installs the PST driver, client software, and optional components).
- Mount the PST on a tripod (1/4-20 UNC) and ensure nothing blocks the line of sight to the objects to be tracked.
- Connect power: plug the power supply into a wall socket (110–240 V), then connect the supply cable to the back of the PST.
- Conectați trackerul la computer:
- Standard PST: connect the provided USB cable to the PST’s USB-B port and then to a USB 2.0 Hi-Speed capable port.
- PST HD or Pico: connect both tracker USB cables to a USB 3.0 SuperSpeed (or faster) port.
- Verify the front status LED is lit, and allow the computer to finish detecting and installing the device driver.
- Start the PST client software from the Start menu:
PST Software Suite # (x*) → PST Client. - On first use, initialize the PST (optionally download initialization files automatically, or load from disk if downloading is not possible).
Ghid de pornire rapidă
Thank you for choosing the PST tracking system. This quick start guide will describe the PST software installation, hardware setup, and initialization procedure.
IMPORTANT: Nu conectați PST-ul înainte de a instala software-ul client.
Instalare software
- Introduceți stick-ul USB al software-ului PST în computer.
- Start the installation software by running ‘pst-setup-#-Windows-x*-Release.exe’, where ‘#’ is the version number and ‘*’ is ‘86’ for the 32-bit installer and ‘64’ for the 64-bit installer.
- Selectați opțiunile dorite și urmați instrucțiunile pe parcursul configurării.
- After the software setup has completed, the PST driver, client software, and optional components will be installed on your computer
Configurare hardware
- Place the PST on a mount (e.g., a tripod). The PST has a standard tripod mount (1/4-20 UNC) at either the bottom or the back of the device(depending on the type). For the best performance, make sure the PST is positioned in such a way that no objects are blocking the line of sight between the PST and the objects to be tracked.
- Atașați cablul de alimentare la unitatea de alimentare și conectați celălalt capăt la o priză de perete (110-240V). Conectați cablul care vine de la unitatea de alimentare în partea din spate a PST-ului.
The status LED on the front side of the standard PST or PST HD should now be lit. If the software has been installed as described in the previous section, your computer will detect the PST and finish the device driver installation
IMPORTANT:
Nu utilizați PST-ul lângă nicio sursă de căldură. PST este un dispozitiv optic de măsurare de înaltă precizie și este proiectat să funcționeze într-un interval de temperatură de la 15 °C la 35 °C (59 °F la 95 °F).
Inițializare:
After the device driver software has been installed, you can start the PST client software. The software can be found in the Start menu at the following location:
- PST Software Suite #(x*)→PST Client, where ‘#’ is the version number and ‘*’ is ‘86’ for the 32-bit installer and ‘64’ for the 64-bit installer.
- If this is the first time you use your PST in the PST client software, it has to be initialized.
- You will be given the option to automatically download the required initialization files.
- After initialization has completed, the PST will be ready for use.
- PDF Manuals on how to work with the PST and HTML documentation for the PST SDK can be found in the start menu.
IMPORTANT:
Dacă nu este posibil să descărcați inițializarea files (e.g., no internet connection is present at your location), it is also possible to load initialization files de pe disc. Vă rugăm să contactați PS-Tech dacă doriți să primiți aceste inițializare files.
IMPORTANT:
PST este un dispozitiv de măsurare optică de înaltă precizie. Deschiderea sau modificarea PST-ului poate cauza daune ireparabile și va anula garanția.
IMPORTANT:
Please keep the original shipping box, as only devices shipped in the original box can be considered for warranty
Contact
For questions regarding installation, setup, and usage of the PST software and hardware, please contact PS-Tech.
- Website: http://www.ps-tech.com
- Adresa: Netherlands, Hoogte Kadijk 143, F4 BH Amsterdam
- E-mail: info@ps-tech.com
- Telefon: +31 20 3311214
Documente/Resurse
 | Software de sistem de urmărire |
Referințe
- tech.comtech.com
- ps-tech.comwww.ps-tech.com
- Manual de utilizaremanual.tools