Modul de calcul OSCIUM WLANPi

The WLAN Pi Go is a compact and powerful portable Wi-Fi network analysis tool. This de­vice is purpose-built for Wi-Fi troubleshooting using passive packet capture and network scanning.
Made for on-the-go users, the WLAN Pi Go makes wireless diagnostics fast, easy, and acces­sible for both personal and professional applications.
Whether you’re diagnosing Wi-Fi network issues in the field, validating performance across multiple sites, or exploring the airwaves, the WLAN Pi Go enables and delivers professional­grade insights.

Ce este în cutie

• WLAN Pi Go
• Geanta de transport
• Ghid de pornire rapidă
• Oscium sticker
• WLAN Pi sticker
• Cabluri:
  • USB Type-C la USB Type-C
  • USB Type-A to USB Type-C

Proiecta

Designed by the WLAN Pi team with input from the community, the WLAN Pi Go is crafted to meet the real-world needs of Wi-Fi professionals – striking a balance of performance, portability, and flexibility. Built on an open, Linux-based software platform, the WLAN Pi Go is ready to grow with you: users and developers can create and add new applications, expanding features and functionalities beyond out-of-the-box capabilities.
Each unit is carefully assembled in the USA using high-quality, globally sourced components to ensure dependable performance wherever your work takes you. Please note that throughout this guide, the terms “product”, “device”, and “WLAN Pi Go” are used inter­changeably and all refer specifically to the WLAN Pi Go hardware device, unless explicitly stated otherwise.

Sprijin
For help, the latest software, user manual, and community resources, please visit https://wlanpi.com  The software is open source and volunteer-maintained. While core developers are dedicated to addressing issues and providing community support, specific response and resolution times or service level agreements are not guaranteed.

Instrucțiuni de configurare

Connect the supplied USB Type-C to Type-C cable from host (iOS/Mac/PC) to the USB Type­C data port on the bottom side of the Go.

Specificații

• Input power required: 5 V / 900 mA
• Host compatibility: iOS/Linux/Mac/Windows (USB Type-C versions)
• Interfete:
  • USB Type-C data port with OTG support
  • USB Type-C accessory port for expansion
• Gama de frecventa:
  • 2.4-2.485 GHz
  • 5.15-5.895 GHz
  • 5.925-7.125 GHz
• Standarde acceptate:
  • IEEE 802.11a/b/g/n/ac/ax/be
• Interval de temperatură de funcționare: 0 °C până la 50 °C
• Storage temperature range: -40 °C to 80 °C
• Relative humidity: 50 % to 90 % non-condensing (at temperatures of 25 °C to 35 °C)
• Size: 33 mm x 61 mm x 84 mm (1.3 x 2.4 x 3.3″)
• Greutate: 156 g (5.5 oz)
• Other: MagSafe compatible

Compatibilitate software

This product interfaces with several mobile and desktop applications, including:

• WLAN Pi App on iOS and Android by Numerous Networks Ltd
• WiFi Explorer Pi on iOS by lntuitibits, LLC
• Airtool Pi on iOS by lntuitibits, LLC
• Metageek App on PC by Osei um, LLC

Local API access

The software on this product provides a local API which allows direct communication with the applications on the device. Advanced users and developers who wish to control or mon­itor the product programmatically can use the API reference in the WLAN Pi Cookbooks to access applications directly or create integration with custom software solutions and/or third-party tools beyond the listed applications.

Procedura de resetare din fabrică
Follow these steps to perform a factory reset, which will erase all existing data and install the latest official WLAN Pi software image.

1. Visit the support section to find and download the latest software image
2. Opriți dispozitivul
3. Insert a paper clip into the small hole on the back of the WLAN Pi Go
4. While holding the reset button with the paper clip, connect the USB-C OTG port on the bottom of the device to your computer
5. Țineți apăsat butonul de resetare timp de 5 secunde
6. Release the reset button. The device should enter bootloader mode.
7. Use balenaEtcher (https://etcher.balena.io/) to install the software image you down­loaded in step 1 onto the device
8. Disconnect the device from your computer and then reconnect to power on

Important: This factory reset process may take up to 20 minutes or more. To prevent data corruption, do not interrupt the process once started.

Funcții de operare

The WLAN Pi Go has three operational modes:

1. Passive Scanning – scans for Wi-Fi networks across the 2.4 GHz, 5 GHz, and 6 GHz bands without transmitting
2. Passive Packet Capture – records Wi-Fi packets on nominated channels without transmitting
3. Device Profiling – temporarily advertises low-duty-cycle beacons to elicit association requests from client devices

All modes are designed with strict compliance to FCC and international regulatory standards. Device profiling is the only mode with intentional RF transmission, where transmission is performed under low duty cycle and certified parameters for client discovery purposes.

• Passive scanning
  In Passive Scanning mode, the WLAN Pi Go uses a Wi-Fi adapter solely as a passive receiver to scan the 2.4 GHz, 5 GHz, and 6 GHz bands.
  This mode enables network professionals to assess the RF environment without requiring additional client-side tools or creating inter­ference on the monitored channels. Visualization and analysis are performed through third-party software, such as WiFi Explorer, on the connected host.
• Passive packet capture
  In Passive Packet Capture mode, the WLAN Pi Go configures the Wi-Fi adapter to receive and record all traffic on a specific Wi-Fi channel. This includes management, control, and data frames observed over the air. No transmission or active participation in the wireless medium is performed in this mode.
  Captured packets can be saved locally on the device or streamed in real time to a connected host device for detailed inspection.
• Device profiling
  In Device Profiling mode, the WLAN Pi Go enables Wi-Fi transmission under strictly controlled conditions. In this mode, a profiler appli­cation advertises short-duration, low-duty-cycle Wi-Fi beacons to emulate an access point. These transmissions are designed solely to elicit association requests from client devices for profiling purposes. Once an association request is received and captured, the beacon transmission automatically stops, and no further communication occurs.
  Data collected during profiling is stored locally and may be accessed by the user through supported applications.

Transmission functionality

The WLAN Pi Go is designed primarily as a passive Wi-Fi analysis tool. Transmission capability is limited to the specific, low-power, low­duty-cycle function described in the Device Profiling section.
Transmission occurs only under the following conditions:

• In support of Device Profiling
• Using certified power levels and within authorized frequency bands (2.4 GHz and 5 GHz only)
• At a duty cycle and power level that qualifies for SAR testing exemption

The WLAN Pi Go firmware is developed to ensure that transmission is limited to this intended behavior. Transmission in the 6 GHz band is not enabled, and the system does not support continuous or configurable transmission outside of the profiled use case.
Users are not provided with any software-level controls to alter these constraints, and the firmware/software image and WLAN Pi App do not permit operation beyond the scope of regulatory compliance.
Oscium, LLC and the WLAN Pi development team are committed to full compliance with FCC and international regulatory requirements. Users are responsible for operating the product in accordance with applicable local laws and regulations.

Statement of conditions

• This product contains software licensed under BSD-3, MIT, and GPL license agreements.
• Product images on packaging are for illustrative purposes only and may differ from the final product.
• A portion of the device’s storage capacity is reserved for firmware and system maintenance. Availability and performance of features, services, and applications may vary depending on product configuration, firmware version, and network environment. Additional terms,  conditions, or service charges may apply.
• Features, specifications, and product details are subject to change without notice.
• Oscium, LLC and the WLAN Pi team are not responsible for any loss or damage resulting from the use or application of this product.

garanție limitată
Users are solely responsible for compliance with all laws of their locality. Oscium, LLC and the WLAN Pi team and affiliates claim no responsibility for unauthorized or unlawful use.

Mărci comerciale
lntuitibits is a registered trademark of lntuitibits, LLC.
Oscium and Metageek are registered trademarks of Oscium, LLC.
WLAN Pi is a pending trademark of Big QAM, LLC.

Siguranţă

• This product may become slightly warm during normal use; this is expected. The product has been tested under typical operating condi­tions using the default software provided by the manufacturer and does not reach temperatures that would pose a safety risk.
• If the device becomes unusually hot to touch, disconnect from power and allow to cool before handling. Excessive heat may indicate abnormal conditions or unauthorized software behavior.
• Always operate the device in a well-ventilated area with adequate air circulation.
• This device contains one or more strong neodymium magnets. Maintain a safe distance between the device and medical implants such as pacemakers or defibrillators, as magnetic fields may interfere with their operation. Handle with care, as strong magnetic attraction may cause injury or damage if body parts or objects are caught between magnetic surfaces.
•  not expose the device to water, moisture, excessive heat, or dust, as this may result in malfunction or permanent damage.
• Opening the device enclosure, modifying internal hardware, or installing unofficial or altered software places the device outside the scope of warranty and manufacturer liability.
• Only firmware and software updates provided or approved by Osei um, LLC or the WLAN Pi team are supported. The manufacturer cannot guarantee safety, performance, or compliance if the product is operated outside the intended hardware and software configuration.

Conformance and compliance
The WLAN Pi Go has been evaluated for conformance with applicable regulatory requirements for electromagnetic compatibility, RF exposure, and product safety. Testing has been performed by accredited laboratories in accordance with FCC rules and international standards.

Regulatory testing summary

• Electromagnetic interference (EMI): Compliant with FCC Part 15 Subpart B for Class B digital devices.
• Product safety: Evaluated to meet applicable safety requirements under IEC/UL standards.

EMI and safety reports can be found at https://oscium.com/regulatory/wlan-pi-go

RF exposure and SAR compliance
This device is designed to operate in the 2.4 GHz, 5 GHz, and 6 GHz Wi-Fi bands, but active transmission functionality is restricted to 2.4 GHz and 5 GHz bands.
The WLAN Pi Go does not operate in any non-compliant RF mode. Complete RF exposure documentation is available upon request.

Declarație de conformitate FCC

Acest dispozitiv respectă Partea 15 din Regulile FCC. Funcționarea este supusă următoarelor două condiții:

1. Acest dispozitiv nu poate cauza interferențe dăunătoare și
2.  Acest dispozitiv trebuie să accepte orice interferență primită, inclusiv interferențe care pot cauza o funcționare nedorită.

FCC ID: 2BNMS-BE200NG

Declarație de expunere la radiații
This device complies with FCC RF exposure requirements and has been evaluated to meet exemption criteria from routine evaluation as specified in 47 CFR 2.1093.

Declarație de conformitate UE
Hereby, Osei um, LLC declares that this device, WLAN Pi Go, is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
Textul integral al Declarației de conformitate UE poate fi găsit la https://oscium.com/regulatory/wlan-pi-go

Frequency bands and maximum output power

Marcaj CE
This product bears the CE mark  to demonstrate compliance with applicable European Union directives and regulations.

Informații privind eliminarea și reciclarea

Acest simbol on the product or packaging indicates that the product must not be disposed of with regular household waste. Please recycle where facilities exist. Check with your local authority for recycling advice and regulations regarding electronic equipment.

Documente/Resurse

Modul de calcul OSCIUM WLANPi [pdfGhid de utilizare WLANPi, Modul de calcul WLANPi, Modul de calcul, Modul

Referințe

• Manual de utilizare