Carcasă de calculator Modecom Volcano Stellar MIDI
I/O panou
- PUTERE
- RESET
- AUDIO HD
- USB 3.0
- USB 3.0
- USB-C
- LED
Accesorii
- A HDD SCREWS
- B MOTHERBOARD & SSD SCREWS.
- C PSU AND GPU SCREWS
- D RISER CABLE STANDOFFS
- E CRAVATĂ ZIP
- F ŞURUBELNIŢĂ
- G PÂNZĂ
- H TG PANEL CLIP
- I SSD SILICONE PADS
- J MB STANDOFFS
- K CUREA DE VELCRO
- L SSD SCREWS
Pesteview
STELLAR NF – NO FANS PRE-INSTALLED
Dimensiuni
Instalare placa de baza
ARGB Hub Installation
PRE-INSTALLED: STELLAR 5F & STELLAR 8F
FUNCŢIE
- Apăsați scurt butonul LED pentru a parcurge modurile LED.
- Apăsați butonul LED timp de 3 secunde pentru a schimba modul la controlul plăcii de bază.
- Apăsați butonul LED timp de 5 secunde pentru a opri alimentarea LED-ului.
- Apăsați butonul LED pentru a reveni la controlul manual.
- After connecting the fans to the motherboard PWM, you can control the fan speed from the Motherboard Settings.
- Memory function after power off. CONNECT CONTROLLER TO PROPER FAN CONNECTOR ON M/B. (FOR A MOTHERBOARD EQUIPPED WITH ARGB FAN CONTROL CONNECTORS, CONNECT IT TO LED CONTROL CONNECTOR ON MB) CONNECT POWER SUPPLY TO SATA. CONNECT LED SW.
Instalare HDD de 3.5”.
2.5” SSD installation
GPU horizontal installation
GPU vertical installation
Instalare sursa de alimentare
Quick Start Guide / Installation
- Deschideți carcasa.
- Instalați toate componentele computerului urmând instrucțiunile din instrucțiunile de asamblare individuale pentru fiecare componentă.
- Montați în carcasă și conectați sursa de alimentare la componentele necesare, urmând instrucțiunile de instalare ale sursei de alimentare și instrucțiunile componentelor care necesită conectarea acesteia. Sursa de alimentare este montată într-un tunel, în partea inferioară a carcasei, cu ventilatorul orientat spre exteriorul carcasei (în jos).
- Verificați asamblarea corectă a componentelor și conectarea ștecherelor de alimentare.
- Închideți carcasa.
- Conectați monitorul, tastatura și alte accesorii la computer.
- Conectați cablul de alimentare la priza din sursa de alimentare și la priza de 230V.
- Setați comutatorul de alimentare de pe carcasa alimentatorului în poziția I (dacă este prezent).
This device was designed and made of high-quality reusable materials and components. If the device, its packaging, user’s manual, etc. are marked with crossed waste container, it means they are subject to segregated household waste collection in compliance with the Directive 2012/19/UE of the European Parliament and of the Council.
This marking informs that electric and electronic equipment shall not be thrown away together with household waste after it’s been utilised. The user is obliged to bring the utilised equipment to electric and electronic waste collection point. Those running such collection points, including local collection points, shops or commune units, provide convenient system enabling to scrap such equipment. Appropriate waste management aids in avoiding consequences which are harmful for people and environment and result from dangerous materials used in the device, as well as improper storage and processing. Segregated household waste collection aids recycle materials and components of which the device was made. A household plays crucial role in contributing to recycling and reusing the waste equipment. This is the stage where the basics are shaped which largely influence the environment being our common good. Households are also one of the biggest users of small electrical equipment.
Management rezonabil la acest stage aids and favors recycling. In the case of improper waste management, fixed penalties may be imposed in accordance with national legal regulations.
This marking informs that electric and electronic equipment shall not be thrown away together with household waste after it’s been utilised. The user is obliged to bring the utilised equipment to electric and electronic waste collection point. Those running such collection points, including local collection points, shops or commune units, provide convenient system enabling to scrap such equipment. Appropriate waste management aids in avoiding consequences which are harmful for people and environment and result from dangerous materials used in the device, as well as improper storage and processing. Segregated household waste collection aids recycle materials and components of which the device was made. A household plays crucial role in contributing to recycling and reusing the waste equipment. This is the stage where the basics are shaped which largely influence the environment being our common good. Households are also one of the biggest users of small electrical equipment.
Management rezonabil la acest stage aids and favors recycling. In the case of improper waste management, fixed penalties may be imposed in accordance with national legal regulations.
Computer Case Safety Instructions
- Introducere
Thank you for choosing our computer case. To ensure your safety and proper operation of the device, please read this manual carefully. Following these instructions will help avoid potential hazards and damage to your equipment. - Avertismente și precauții de siguranță
- Instalare și exploatare
- Never open the case while it is in operation. Before beginning installation or maintenance, make sure the computer is unplugged.
- Do not use the case in a humid environment. Moisture can cause short circuits and damage to components.
- Be careful of the sharp edges inside the case. Wear protective gloves when installing components to avoid injury.
- Make sure the mounting screws are tightened, but not overtightened. Overtightening can damage the threads.
- Alimentare electrică
- Only use power supplies that are compatible with the case. An incorrect power supply can cause overheating or short circuits.
- Check for correct wiring. Incorrectly connected cables can damage components and the case.
- Do not load multiple devices on the same electrical circuit. Ensure adequate power stability to avoid overloading the electrical network.
- Ventilation and Overheating
- Ensure adequate airflow. Do not block vents or filters. Clean dust filters regularly.
- Do not install the case in an enclosed space without air circulation. Avoid placing the computer near heat sources such as radiators.
- Monitor component temperatures. If you are using high-performance components, consider installing additional fans or a liquid cooling system.
- Depozitare și transport
- Store the case in a dry and clean place. Avoid exposure to extreme temperatures, moisture, and dust.
- Protect the case from shocks during transportation. Use the original packaging or appropriate protective materials.
- Instalare și exploatare
- Instructiuni de asamblare
- Pregătirea pentru Asamblare
- Make sure you have all the required tools (e.g. Phillips screwdriver).
- Choose a suitable work area with access to lighting and sufficient work space.
- Instalarea componentelor
- Install the motherboard on the mounting spacers to avoid short circuits.
- Follow the manufacturer’s instructions when installing the CPU, RAM, and graphics card.
- Connect the cables according to the labels on the motherboard and power supply.
- Make sure that all components are properly attached and that no cables block the fans.
- Pregătirea pentru Asamblare
- Curatenie si intretinere
- Regularly remove dust from the inside of the case using compressed air.
- Check the condition of the dust filters and clean them every few weeks.
- Do not use any liquid cleaning agents inside the case.
- Informații suplimentare
- garanție: To avoid voiding the warranty, do not modify the case or its components.
- Suport tehnic: In case of problems, contact our customer service department.
- Reciclare: Dispose of used devices at appropriate recycling points in accordance with local regulations.
Thank you for following these guidelines. Proper use of the case will ensure the safety and longevity of your equipment.
Documente/Resurse
 |
Carcasă de calculator Modecom Volcano Stellar MIDI [pdfManual de instrucțiuni Volcano Stellar Midi Computer Case, Stellar Midi Computer Case, Midi Computer Case, Computer Case |