Str. M5STACKamp-S3Bat Embedded Core Module User Guide

Str. M5STACKamp-S3Bat Embedded Core Module

Descriere

Stamp-S3Bat is an embedded core module integrated with power management. It utilizes the ESP32-S3-PICO-1-N8R8 as the main control core, supports 2.4GHz Wi-Fi, and comes with built-in 8MB Flash and 8MB PSRAM.
It provides 11 GPIO pins, an onboard battery power interface, and can be directly connected to an external 3.7V lithium battery for power supply.

With an efficient built-in PMIC and multi-level power control design, it supports power input and output control, as well as status monitoring for input voltage și vol. baterietage. It supports external low-power wake-up. After the main controller shuts down and enters low-power sleep mode, it can be triggered to wake up via an external PMIC wake-up IO. The module features an onboard user button and a programmable RGB LED. With 2.54mm standard-pitch half-hole solder pads, it can be integrated into your applications through SMT, DIP, or other methods, helping developers quickly build IoT applications.

Specificații

Pornire rapidă

Pregătirea

1. Vizitați pagina oficială Arduino website și instalați IDE-ul Arduino
   https://www.arduino.cc/en/Main/Software
2. Adăugați următorul manager de consiliu URL la File → Preferințe → Manager panouri suplimentare URLs:
   https://espressif.github.io/arduino-esp32/package_esp32_dev_index.json
3. Deschideți Managerul de plăci, căutați „ESP32” și faceți clic pe Instalare.
4. After installation, select the board “ESP32S3 Dev Module”.
5. Configure the following options. USB CDC On Boot: “Enabled”, PSRAM： “OPI PSRAM”, USB Mode: “Hardware CDC and JTAG„

Scanare Wi-Fi

• Selectați exampprogramul „Ex”amples” → “WiFi” → “WiFiScan”, choose the port corresponding to your device, and click the compile and upload button in the top-left corner.
• After uploading is complete, open the Serial Monitor to view Informații despre scanarea Wi-Fi.

Scanare BLE

• Selectați exampprogramul „Ex”amples” → “BLE” → ”Scan”, choose the port corresponding to your device, and click the compile and upload button in the top-left corner.
• After uploading is complete, open the Serial Monitor to view Informații despre scanarea BLE.

Avertisment FCC

Atenție FCC:
Orice Schimbări sau modificări care nu sunt aprobate în mod expres de partea responsabilă pentru conformitate ar putea anula autoritatea utilizatorului de a opera echipamentul.

Acest dispozitiv respectă partea 15 din Regulile FCC. Funcționarea este supusă următoarelor două condiții:

1. This device may not cause harmful interference, andThiss device must accept any interference received, including interference that may cause undesired operation.

NOTĂ IMPORTANTĂ:

Nota: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, use,s and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorientați sau mutați antena de recepție.
• Măriți distanța dintre echipament și receptor.
• Conectați echipamentul la o priză pe un circuit diferit de cel la care este conectat receptorul.
• Consultați distribuitorul sau un tehnician radio/TV cu experiență pentru ajutor.

Declarație FCC privind expunerea la radiații:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated wita h minimum distance of 20cm between the radiator & your body.

Întrebări frecvente