Cuprins
ascunde
Procesor de audioconferință Lumens P300
Specificații
- Switcher with a DHCP server function
- Suportă conectivitate Ethernet
- Suportă switch PoE+ (802.3at)
- Alimentare USB tip C 5V/4A
- Opțiuni de ieșire video: UVC, HDMI
- Ethernet cable: Cat 5e above level
- HDMI: HDMI 2.0
- USB: Type-C to Type-A.
Scop
- Help users quickly install Lumens CamConnect Pro and Shure P300.
- These setting tips are the sharing of the key steps summarized after we have installed this system many times.
Pregăti
- This document uses the Hure P300 as an example of a setting.
- Please install Shure P300, Lumens CamConnect Pro, and Lumens PTZ cameras on the same LAN (same class C network).
- For the first installation, you need to prepare a router or Switcher with a DHCP server function.
Setări hardware
Configurați Mediul
Please connect the Cameras, Microphone, and AI-BOX1 to the same LAN.
Descoperirea dispozitivului
Build a new online room.
Conexiune în P300
Setări CamConnect Pro
Dispozitiv de asistență și setări
Go to the CamConnect Pro webpage (Enter CamConnect Pro IP address in the browser)
- Pull down the Device item and select [Shure P300]
- Enter the IP address of Shure P300, kick blank area , and press [Apply]
- Switch the [Connect] button to connect with P300.
- Time to Trigger Preset: This function is that the camera will start moving to the preset point only after a person’s voice exceeds a certain duration. Range is 0.1sec~5 secs.
- Back to Home Camera & Back to Home Position: Press [Set]. You can choose which camera you would like to let it back to Home, and which preset position you would like to return back.
Camera de conectare
- Search the camera on the LAN
- Connect the camera you need.
- Make sure the resolution of connected cameras is the same as the CamConnect Pro setting. ( Default is 1920*1080 60P0)
Setarea presetată a camerei
According to the sound position to set the camera preset.
- Enable the [Voice tracking].
- Make sound and check the flashing Array No. of green lights. If the green light is flashing on Array No.1, please select the Primary camera to set the preset position you need.
Setare de ieșire video
- Choose the Video output you want, and then press [Apply]. (Remind: UVC+HDMI might have more latency when the device is busy.)
- Press [Start Video Output].
The video will output on your display.
Multumesc!
Întrebări frecvente
and set the camera preset position corresponding to the Array No. with flashing green light when sound is detected. ” image-2=”” count=”3″ html=”true” css_class=””]Documente/Resurse
 |
Procesor de audioconferință Lumens P300 [pdfGhid de utilizare AI-Box1, P300, Procesor de audioconferință P300, P300, Procesor de audioconferință, Procesor de conferință, Procesor |