Cuprins
ascunde
FIXED TYPE AVTECH Fixed Outdoor Network Camera
Specificațiile produsului
- Product Type: Fixed Type Camera
- Conținutul pachetului:
- Camera foto
- Ghid de pornire rapidă
- Screws & Waterproof Wall Plugs
- Set de mufe
PRODUS TERMINATVIEW
LISTA DE AMBALARE
INSTALARE CAMERA
- Step 1: Rotate to disassemble the camera 1 and loosen the screw to separate the camera and the base plate 2.
- Step 2: Locate the base plate to where you would like to install the camera and place the cable through the plate; make sure the cable is arranged properly. Then, fasten the base plate to the wall (or ceiling).
- Step3: Reassemble the camera and ensure the lens targets the area you want.
Installing a microSD card is Optional based on different models
- Note: Disconnect the camera power before installing a microSD card.
- Step 1: Remove the cover as indicated to find the microSD card slot.
- Step 2: Insert a microSD card and replace the cover. Make sure the rubber ring is well attached and fastened to ensure the waterproof function works normally.
Instalarea unui kit de dopuri impermeabile
- Notă: Se recomandă insistent utilizarea kitului de mufă impermeabilă pentru a proteja conectorul RJ45 de rugină.
FAQ
Q: Do I need to use the waterproof plug kit?
A: It is highly recommended to use the waterproof plug kit to protect the RJ45 connector from rusting and ensure long-term functionality.
Documente/Resurse
 |
FIXED TYPE AVTECH Fixed Outdoor Network Camera [pdfGhid de instalare AVTECH Fixed Outdoor Network Camera, AVTECH, Fixed Outdoor Network Camera, Outdoor Network Camera, Network Camera, Camera |