e-shock CU02 Communication Module User Manual

e-shock CU02 Communication Module

Domeniul de aplicare

Designed for professional integration into host devices, the CU02 radio module complies with the following FCC and ISED Rules:

47 CFR FCC Part 15, Subpart C (section 15.247) RSS-247, Issue 3 (August 2023)

Specificatii tehnice

1. Alimentare: 8-28 Vdc
2. Benzi de frecventa de operare:
   • 2402 – 2480 MHz (Bluetooth mode)
   • 2402 – 2480 MHz (BLE mode)
   • 2412 – 2462 MHz (WiFi mode)
3. Transmisia puterii RF:
   • 9 mW (Bluetooth mode)
   • 7 mW (BLE mode)
   • 174 mW (WiFi mode)

Condiții de utilizare operaționale specifice

• This radio module is for OEM integration only and cannot be sold to general public.
• The company E-Shock S.r.l. is the Grantee of this FCC ID / IC. This radio module is exclusively for integration into host devices manufactured by E-Shock S.r.l. only.

Proceduri cu module limitate

This modular transmitter has been tested in a “non-standalone” configuration – i.e., embedded in a test jig board – for compliance with Part 15 requirements.
The module requires the host integrator to file a Class II permissive change for each specific host, considering the test plan detailed in chapter 5.4.
A host manufacture is recommended to use FCC’s KDB 996369 D04 Module Integration Guide V01 as “best practice” for RF design engineering, testing and evaluation.

Responsabilitățile OEM de a respecta reglementările FCC

1. Considerații generale
   This modular transmitter has been tested as a subsystem and its certification does not cover the FCC Part 15 Subpart B and ICES-003 requirements, which are applicable to the final host. The final host shall be assessed for compliance with the requirements of the above Regulations, as applicable.
2. Host Manufacturer Responsibilities
   Host manufacturers are ultimately responsible for the full compliance of the host system before it can be placed on the US/Canadian market.
   This includes reassessing the transmitter module for compliance with all applicable radio and RF Exposure requirements of the FCC and ISED rules.
   Nota: this radio module is designed for integration into end products manufactured by E-Shock S.r.l., which assumes full responsibility for the final compliance.
3. Multi-Radio Systems
   This module must not be incorporated into any other radio system without retesting for compliance as multi-radio and combined equipment.
   In case of any co-located radio transmitter being allowed to transmit simultaneously, or in case of portable use at closer distances from the human body than those allowing the exceptions rules to be applied, a separate additional SAR evaluation will be required, ultimately leading to a Class II Permissive Change, or more rarely to a new Grant.

Nota: if these conditions cannot be met, then the FCC authorization is no longer considered valid, and the FCC ID/IC identifiers cannot be used on the final product. Then for the FCC/ISED authorization to remain valid, the final product will have to undergo additional testing to evaluate the RF exposure and a Permissive Change will have to be applied. The evaluation (SAR) is in the responsibility of the end-product’s manufacturer, as well as the Permissive Change that can be carried out with the help of a Telecommunication Certification Body.

Test plan (KDB996369 D01)
Module integrator shall confirm and demonstrate compliance with the following test plan:

• Perform Maximum Output Power test (radiated) according to Part 15.247 / KDB558074 D01 (IEEE 802.11b, frequency: 2462 MHz, ch.11; data rate: 1.0 Mbps )
• Check band edge compliance according to Part 15.247 / KDB558074 for lowest channel (IEEE 802.11b, frequency: 2412 MHz, ch.1; data rate: 1 Mbps D01)
• Check band edge compliance according to Part 15.247 / KDB558074 for upper channel (IEEE 802.11b, frequency: 2462 MHz, ch.11; data rate: 1 Mbps D01)
• Perform radiated spurious emission (frequency range 1 GHz – 25 GHz) according to Part 15.247 (IEEE 802.11b, frequency: 2437 MHz, ch.6; data rate: 1 Mbps)
  Nota: radiated spurious emission test must be carried out with all transmitters active if they can operate simultaneously.
• Demonstrate compliance with human exposure requirements according to 47 CFR Part 2, § 2.1091/ KDB447498 D01 (see also chapter 7).
• Final host system requires compliance testing according to 47 CFR Part 15.

Design antenă

Tipul antenei
The antenna must be embedded according to the following instruction:

Please refer Tvpe1DX Antenna P2ML4452-1-A.dxf (see following drawing):

Câștig antenă
Antenna gain must be lower than 0.6 dBi.

Condiții de expunere la RF
This modular transmitter complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. The antenna should be installed and operated at a minimum distance of 20 cm between the radiator and the human body.
This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures (see chapter 5.3).

Etichetarea produsului final
Due to the small dimensions of this modular transmitter, FCC ID, as well as IC and HVIN identifiers, are reported in the User Manual. A removable label is also attached to the product. End product must be labeled in a visible area with the following text:

• “Contains FCC ID: 2BOUM-CU02”
• “Contains IC: 33848-CU02”

după caz.

Information to the End User

• The end user manual shall include all required Regulatory information/warning as follows:
• Schimbările sau modificările neaprobate în mod expres de către partea responsabilă pentru conformitate ar putea anula autoritatea utilizatorului de a utiliza echipamentul.

For US market:
Acest dispozitiv respectă partea 15 din Regulile FCC. Funcționarea este supusă următoarelor două condiții:

1. Acest dispozitiv nu poate cauza interferențe dăunătoare și
2. Acest dispozitiv trebuie să accepte orice interferență primită, inclusiv interferențe care pot cauza o funcționare nedorită.

Acest echipament a fost testat și sa constatat că respectă limitele pentru un dispozitiv digital de Clasa B, în conformitate cu partea 15 din Regulile FCC. Aceste limite sunt concepute pentru a oferi o protecție rezonabilă împotriva interferențelor dăunătoare într-o instalație rezidențială. Acest echipament generează, utilizează și poate radia energie de frecvență radio și, dacă nu este instalat și utilizat în conformitate cu instrucțiunile, poate provoca interferențe dăunătoare comunicațiilor radio. Cu toate acestea, nu există nicio garanție că interferențele nu vor apărea într-o anumită instalație. Dacă acest echipament cauzează interferențe dăunătoare recepției radio sau televiziunii, ceea ce poate fi determinat prin oprirea și pornirea echipamentului, utilizatorul este încurajat să încerce să corecteze interferența prin una sau mai multe dintre următoarele măsuri:

• Reorientați sau mutați antena de recepție.
• Măriți distanța dintre echipament și receptor.
• Conectați echipamentul la o priză pe un circuit diferit de cel la care este conectat receptorul.
• Consultați distribuitorul sau un tehnician radio/TV cu experiență pentru ajutor.

Declarație de expunere la radiații RF
This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The antenna should be installed and operated at a minimum distance of 20 cm between the radiator and the human body.
This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures.

For Canadian market
Acest dispozitiv conține emițătoare/receptoare scutite de licență care respectă RSS-urile scutite de licență ale Innovation, Science and Economic Development Canada. Funcționarea este supusă următoarelor două condiții:

1. Este posibil ca acest dispozitiv să nu provoace interferențe.
2. Acest dispozitiv trebuie să accepte orice interferență, inclusiv interferența care poate cauza funcționarea nedorită a dispozitivului.

Notificare ICES-003 Clasa B – Avis NMB-003 Clasa B:
Acest dispozitiv digital de clasa B este în conformitate cu ICES-003 canadian.

CAN ICES-3 (B) / NMB-3 (B)
Declarație de expunere la radiații RF:
This product complies with ISED radiation exposure limits set forth for an uncontrolled environment. The antenna should be installed and operated at a minimum distance of 20 cm between the radiator and the human body.
This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter except in accordance with ISED multi-transmitter product procedures.
Acest dispozitiv respectă Codul de siguranță al Health Canada. Instalatorul acestui dispozitiv trebuie să se asigure că radiația RF nu este emisă în depășire față de cerințele Health Canada.

FAQ