DingKey Designs Thermo Logger Channel Data Logger

Descriere produs
The ThermoLogger delivers precision temperature monitoring and data logging with three Type K thermocouple channels, web interface controls using built-in WiFi connectivity, and comprehensive recording capabilities.

Specificații

• Model: ThermoLogger
• Tip de intrare: K-type thermocouples
• Canale: Până la 3
• Depozitare: SD Card (FAT32 formatted)
• Interfață: USB-C
• Afişa: OLED
• Controla: Single, Double, Long Press
• Web Interfață: Da

Caracteristici

• 3 Type K thermocouple inputs (MAX31855K interface)
• OLED display with real-time readings
• Built-in WiFi access point for remote monitoring
• Web-based dashboard interface
• SD card data logging in CSV format
• DS3231 Real-time clock with CR 2032 battery
• S reglabilampling interval (1s default, adjustable between 0.1-600 seconds)
• Temperature units: °C, °F, K
• Automatic min/max temperature tracking
• Ambient temperature monitoring
• Single-button control interface
• Alimentare 5V prin USB-C
• Cable tie/zip tie holes for strain relief

Beneficii

• Monitor multiple temperature points simultaneously
• Access readings remotely via any WiFi-enabled device
• Record data for analysis and documentation
• No internet connection required for operation
• Easy setup with no configuration necessary
• Compact design for versatile placement

Aplicații

• Cooking and food processing
• Scientific experiments
• HVAC system analysis
• Monitorizarea proceselor industriale
• Educational projects
• Preparare acasă
• Electronics testing
• Diagnosticare auto

Ce este inclus

• ThermoLogger Device
• Baterie CR2032
• Card SD de 32 GB
• K-Type Thermocouple (optional)
  • Nota: Bundled thermocouple color coding polarity:
  • Red wire is T+ for Chromel
  • Black wire is T- for Alumel
  • A cable tie is included for strain relief on device

Ce este necesar

• Small flat head screwdriver for securing screw terminals
• USB-C cable for powering the device

Operare de bază

1. Connect K-type thermocouples to device inputs using a screwdriver, up to 3 channels.
2. Insert a FAT32 formatted SD Card into the device for logging
3. Plug in the USB-C cable to power up the device
4. Read temperatures on the OLED display
5. Check for the correct orientation of the thermocouple. If installed backward, the temperature change direction will be reversed.

Controale

• Apăsați o singură dată: Toggle between current/min/max
• Presă dublă: Start/stop SD recording
• Apăsare lungă: Change temperature units (C/F/K)

Thermocouple Values:

• Ambient Temp Value
• Interval de înregistrare
• Wifi IP Address

Web Interfață

• Connect to the other device’s WiFi AP (Thermologger-xxxx)
• Deschide a web browser
• Enter the IP address shown on the device display
• Utilizare web controls for setting the RTC real-time clock. Logging interval, viewing temperature data, and controlling start/stop for logging

Întrebări frecvente

Q: How do I change the temperature units on the ThermoLogger?
A: To change the temperature units (Celsius/Fahrenheit/Kelvin), perform a long press on the device.

Q: Can I use thermocouples other than K-type with the ThermoLogger?
A: The ThermoLogger is designed for use with K-type thermocouples only.

Documente/Resurse

DingKey Designs Thermo Logger Channel Data Logger [pdfGhid de utilizare Thermo Logger Channel Data Logger, Logger Channel Data Logger, Channel Data Logger, Data Logger

Referințe

• Manual de utilizare