GOLABS CT1

GOLABS CT1 2-Person CampManual de instrucțiuni pentru cort

Model: CT1

Introducere

This manual provides detailed instructions for the proper setup, operation, maintenance, and care of your GOLABS CT1 2-Person Camping Tent. Please read this manual thoroughly before using the tent to ensure a safe and enjoyable experience. Retain this manual for future reference.

Produs terminatview

Caracteristici cheie

  • Practical Size: Outer dimensions: 84.6 x 65 x 48.8 inches; inner dimensions: 82.7 x 59 x 48 inches. Designed for two adults.
  • Protecție impermeabilă: Features PU1500mm waterproof coating and premium fabric to keep the interior dry.
  • Materiale durabile: Constructed with 190D polyester taffeta and strong fiberglass poles for reliability.
  • Confort respirabil: Mesh skylight and door provide ventilation and insect protection.
  • Ușor și portabil: Weighs approximately 4.4 lbs and packs into a 20.1 x 5.9 inch carry bag.
  • Smart Interior Design: Includes one hook for lanterns or small items and two storage pockets.

Componente incluse

Verificați dacă toate componentele sunt prezente înainte de a încerca să instalați cortul.

Diagram showing all components included with the Golabs CT1 tent: tent body, two poles, seven stakes, three ropes, and a carry bag.

Image: All components of the GOLABS CT1 tent, including the tent body, poles, stakes, ropes, and carry bag.

  • Tent Body (with integrated rainfly)
  • Poles x 2 (Fiberglass)
  • Mize x 7
  • Frânghii x 3
  • Geanta de transport x 1

Instrucțiuni de configurare

The GOLABS CT1 tent is designed for quick and easy setup, typically within 3 minutes for experienced users.

Visual guide for setting up the Golabs CT1 tent, showing a person unrolling the tent, inserting poles, and securing it.

Image: Step-by-step visual representation of the tent setup process.

  1. Despacheta: Remove the tent and all components from the carry bag. Lay the tent body flat on a clear, level surface, ensuring the floor is spread out.
  2. Asamblați stâlpii: Connect the sections of the two fiberglass poles.
  3. Inserați poli: Locate the pole sleeves on the tent body. Carefully slide each pole through its corresponding sleeve, forming an 'X' shape over the tent.
  4. Stâlpi siguri: Insert the ends of the poles into the grommets or pins located at the corners of the tent. This will raise the tent structure.
  5. Atașați clemele: Clip the tent body to the poles using the plastic clips along the pole sleeves.
  6. Miză în jos: Secure the tent to the ground using the provided stakes. Insert stakes through the loops at each corner and along the sides. For added stability, especially in windy conditions, attach the ropes to the designated points and stake them out.
  7. Regla: Ensure the tent is taut and stable. Adjust stakes and ropes as needed.

Operarea cortului

Ventilare

A person organizing gear outside the Golabs CT1 tent, highlighting the mesh door and top for ventilation.

Image: The tent's mesh door and top provide airflow, keeping the interior cool.

The GOLABS CT1 tent features a mesh skylight and a mesh door. These elements are crucial for maintaining airflow and reducing condensation inside the tent. Keep the mesh door and skylight uncovered when conditions allow to maximize ventilation and keep insects out.

Waterproof Features

The Golabs CT1 tent standing in light rain, demonstrating its PU1500mm waterproof coating.

Image: The tent in a rainy environment, showcasindatorită designului său impermeabil.

The tent is equipped with a PU1500mm waterproof coating. This coating, combined with the tent's fabric, provides protection against rain. Ensure all zippers are fully closed during rain to prevent water entry.

Caracteristici interioare

Close-up images of the tent's interior features: a hook for hanging items, a bottle/glasses storage pocket, and a phone/flashlight storage pocket.

Imagine: Detaliată view of the tent's internal hook and storage pockets.

  • Cârlig pentru lanternă: A built-in hook is provided at the top of the tent for hanging a lantern or other lightweight items.
  • Buzunare de depozitare: Two interior storage pockets are available to keep small essentials organized and within reach, such as phones, flashlights, or glasses.

Întreţinere

Întreținerea corectă prelungește durata de viață a cortului dumneavoastră și îi asigură performanța.

  • curatenie: Clean the tent with a soft sponge and mild soap (non-detergent) and lukewarm water. Do not use harsh chemicals, bleach, or machine wash. Spot clean only.
  • Uscare: Asigurați-vă întotdeauna că cortul este complet uscat înainte de a-l împacheta. Reclamă de ambalareamp tent can lead to mildew, odor, and fabric degradation. Air dry in a shaded area.
  • Depozitare: Depozitați cortul în geanta sa de transport, într-un loc răcoros și uscat, ferit de lumina directă a soarelui și de temperaturi extreme.
  • Îngrijirea stâlpului: Inspect poles for cracks or damage before and after each use. If a pole splinters, repair kits are available.
  • Îngrijirea fermoarului: Keep zippers clean and free of dirt. Lubricate occasionally with a silicone-based zipper lubricant if they become stiff.

Depanare

Condensation Inside Tent

  • Cauza: Body heat and moisture from breathing, combined with cooler outside air, can cause condensation.
  • Soluţie: Maximize ventilation by keeping the mesh door and skylight open whenever weather permits. Ensure adequate airflow around the tent.

Scurgeri de apă

  • Cauza: Improper setup, damaged fabric, or worn seams.
  • Soluţie: Ensure the tent is pitched tautly and correctly. Check for small holes or tears and repair with a tent repair kit. Seams can be re-sealed with a seam sealer product.

Poles Not Fitting/Breaking

  • Cauza: Incorrect pole assembly or excessive force during setup.
  • Soluţie: Ensure pole sections are fully seated. Avoid bending poles excessively. If a pole breaks, use a pole repair sleeve (often included in tent repair kits) or contact customer support for replacement parts.

Specificații

CaracteristicăDetaliu
MarcaGOLABS
Numele modeluluiCT1
Ocupare2 Persoană
Dimensiuni produs (L x l x H)83.5 cm x 59.8 cm x 45.7 cm
Greutatea articolului4.32 lire sterline
Tehnologie de rezistență la apăPU1500mm
anotimpuri3 Sezoane
Material190D Polyester Taffeta, Fiberglass Poles
Asamblare necesarăDa
Componente incluseTent, Poles, Stakes, Ropes, Carry Bag

Informații despre garanție

The GOLABS CT1 2-Person CampCortul vine cu un Garanție limitată de 1 ani from the date of purchase. This warranty covers manufacturing defects in materials and workmanship. It does not cover damage caused by misuse, improper setup, accidents, normal wear and tear, or modifications.

Vă rugăm să păstrați dovada achiziției pentru cererile de garanție.

Asistență pentru clienți

For any questions, concerns, or assistance with your GOLABS CT1 Camping Tent, please contact GOLABS customer support.

Website: www.golabs.com (Example Link, please refer to actual product packaging for official contact details)

E-mail: support@golabs.com (Example Email, please refer to actual product packaging for official contact details)

Documente conexe - CT1

Preview Manual de utilizare pentru stația electrică portabilă GOLABS R150
Comprehensive user manual for the GOLABS R150 Portable Power Station. Learn about its features, charging methods, specifications, safety guidelines, and troubleshooting for this 204Wh LiFePO4 solar generator.
Preview Manual de utilizare pentru stația electrică portabilă GOLABS R300
Comprehensive user manual for the GOLABS R300 Portable Power Station, detailing its features, charging methods, usage instructions, specifications, error codes, and FAQs. Learn how to safely and effectively use your portable power solution for outdoor adventures and emergency preparedness.
Preview GOLABS R300 Portable Power Generator User Manual
User manual for the GOLABS R300 Portable Power Generator, detailing its features, charging methods, output functions, specifications, and safety precautions.
Preview Manual de instalare a temporizatorului de uz general Presco CT1 seria 4
Manual de instalare pentru temporizatorul de uz general Presco CT1 seria 4, care detaliază caracteristicile, specificațiile, configurarea și 14 moduri de funcționare pentru aplicații precise de control al timpului.