TaoHFE CT-VB003PK

TaoHFE Pink Kids Vanity Table and Chair Set Instruction Manual

Model: CT-VB003PK

1. Introducere

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your TaoHFE Pink Kids Vanity Table and Chair Set, Model CT-VB003PK. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

2. Informații de siguranță

  • Nu lăsați la îndemâna copiilor toate piesele mici și materialele de ambalare în timpul asamblării pentru a preveni riscurile de sufocare.
  • Asigurați-vă că toate șuruburile și elementele de fixare sunt strânse bine înainte de utilizare. Verificați periodic și strângeți din nou, dacă este necesar.
  • Do not allow children to climb on the vanity table or chair.
  • Place the vanity set on a flat, stable surface to prevent tipping.
  • The LED mirror requires batteries (not included). Ensure correct battery polarity and dispose of used batteries responsibly.
  • Evitați expunerea produsului la umiditate excesivă sau la lumina directă a soarelui.

3. Conținutul pachetului

Verificați dacă toate componentele enumerate mai jos sunt prezente înainte de a începe asamblarea. Dacă lipsesc sau sunt deteriorate piese, vă rugăm să contactați serviciul de asistență pentru clienți.

  • Vanity Table Top with Mirror
  • Picioare de masă (4)
  • Drawer with Crystal Handle
  • Side Cabinet with Door
  • Spătarul scaunului
  • Scaun Scaun
  • Picioare de scaun (4)
  • Elemente de asamblare (șuruburi, dibluri etc.)
  • Manual de instructiuni
TaoHFE Pink Kids Vanity Table and Chair Set

Figura 3.1: Pesteview of the TaoHFE Pink Kids Vanity Table and Chair Set.

4. Configurare și asamblare

Assembly typically requires a Phillips head screwdriver (not included). Follow the steps carefully.

4.1. Assemble the Vanity Table

  1. Attach the four table legs to the main table body using the provided screws. Ensure they are securely fastened.
  2. Slide the drawer into its designated slot. Attach the crystal handle to the drawer front.
  3. Attach the side cabinet door to the cabinet frame using the provided hinges.
  4. Carefully place the vanity top with the mirror onto the assembled base, aligning it with the pre-drilled holes. Secure it with screws.
Close-up of LED lighting, crystal handle, and display glass

Figure 4.1: Detail of the LED mirror, crystal handle, and display glass.

4.2. Assemble the Chair

  1. Attach the four chair legs to the chair seat using the provided screws.
  2. Secure the chair backrest to the chair seat and legs.

4.3. Install LED Mirror Batteries

  1. Locate the battery compartment behind the mirror.
  2. Insert the required batteries (type and quantity specified on the compartment cover) ensuring correct polarity.
  3. Închideți bine capacul compartimentului bateriei.
View of the LED light wiring and battery compartment behind the mirror.

Figura 4.2: Spate view showing LED light wiring and battery compartment.

5. Instrucțiuni de utilizare

5.1. Using the LED Mirror Light

To activate the LED light, press the power button located on the vanity surface near the mirror. Press again to turn off the light. The light provides natural, warm illumination.

Close-up of the LED light power button located on the vanity surface.

Figure 5.1: Location of the LED light power button.

5.2. Utilizing Storage

The vanity table includes a main drawer with six partitioned compartments for organizing small items such as jewelry, hair accessories, or small toys. A side cabinet with a door offers additional enclosed storage space.

Open drawer revealing six partitioned storage compartments for accessories.

Figure 5.2: Open drawer showing partitioned storage.

Vanity set showing the side cabinet with a door for additional storage.

Figure 5.3: Vanity with side cabinet for storage.

6. Întreținere

6.1. Curatenie

  • Ștergeți suprafețele cu un material moale, damp Evitați produsele de curățare abrazive sau substanțele chimice dure.
  • For the mirror, use a glass cleaner and a lint-free cloth.
  • Ensure the vanity is dry after cleaning to prevent water damage.

6.2. Îngrijire generală

  • Verificați periodic toate șuruburile și conexiunile pentru a vă asigura că rămân strânse.
  • Avoid placing hot items directly on the vanity surface.
  • Keep the vanity away from direct heat sources or prolonged exposure to sunlight to prevent material degradation.

7. Depanare

  • Lumina LED nu funcționează:
    Check if batteries are correctly installed and not depleted. Replace batteries if necessary. Ensure the power button is pressed firmly.
  • Lipirea sertarului:
    Ensure the drawer is properly aligned on its runners. Check for any obstructions within the drawer or its compartment.
  • Vanity or Chair Wobbles:
    Verify that all assembly screws are securely tightened. Ensure the product is placed on a level surface.

8. Specificații

CaracteristicăDetaliu
MarcaTaoHFE
Numărul de modelCT-VB003PK
CuloareRoz
MaterialLemn de inginerie
Dimensiunile produsului16.6 x 31.5 x 40.5 inches (Vanity)
Greutatea articolului40 lire sterline
Asamblare necesarăDa
Tip oglindăOglindă iluminată cu LED
DepozitareDrawer with 6 compartments, Side Cabinet
Detailed dimensions of the vanity table and chair.

Figura 8.1: Diagrama dimensiunilor produsului.

9. Informații despre garanție

For specific warranty details regarding your TaoHFE Pink Kids Vanity Table and Chair Set, please refer to the warranty card included with your purchase or contact TaoHFE customer support directly. Warranty terms and conditions may vary.

10. Asistență pentru clienți

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact TaoHFE customer support. Refer to the contact information provided on the product packaging or the official TaoHFE website-ul.

Documente conexe - CT-VB003PK

Preview Ghid de utilizare pentru ceasul inteligent pentru copii
Ghid complet de utilizare pentru ceasul inteligent pentru copii, care acoperă siguranța, funcționarea, caracteristicile și depanarea.
Preview Manual de utilizare Odot Automation seria C IO la distanță
Acest manual de utilizare oferă detalii complete despre sistemul Odot Automation seria C Remote IO, acoperind caracteristicile modulelor, instalarea, cablarea, parametrii tehnici și configurarea pentru diverse adaptoare de rețea și module IO extinse.
Preview CAEN ELS PS1215 Low-Noise Power Supply User Manual
User manual for the CAEN ELS PS1215, a single-output, dual-voltage, low-noise AC/DC power supply designed for high-efficiency operation and DCCT measurement systems. Includes technical specifications, safety guidelines, I/O details, and ordering information.
Preview Ghid de instalare a driverului CITIZEN pentru Windows pentru versiunea 3.6xx
Acest ghid complet oferă instrucțiuni pas cu pas pentru instalarea driverelor de imprimantă CITIZEN (Ver3.6xx) pe sistemele de operare Windows. Acesta acoperă pregătirea esențială, procesul de instalare, selectarea porturilor pentru diverse interfețe și dezinstalarea.
Preview Ghid de instalare pentru masa de conferințe Tribesigns Cassey de 70.9 inci
Instrucțiuni complete de instalare pentru masa de conferințe dreptunghiulară Tribesigns Cassey de 70.9 inci (model CT-F1596). Include lista de piese, detalii despre hardware și îndrumări de asamblare pas cu pas.
Preview Instrucțiuni de instalare și siguranță pentru releele de timp ABB CT-AHS, CT-APS, CT-ARS, CT-ERS, CT-MBS, CT-MFS, CT-MVS, CT-MXS, CT-SDS, CT-WBS
Detailed installation instructions, safety warnings, technical specifications, and function diagrams for the ABB CT-AHS, CT-APS, CT-ARS, CT-ERS, CT-MBS, CT-MFS, CT-MVS, CT-MXS, CT-SDS, and CT-WBS series of time relays. Covers electrical connections, control inputs, and operating principles.