Manual de utilizare scaner THINKCAR THINKSCAN 662 OBD2

1. Introducere

The THINKCAR THINKSCAN 662 is an advanced OBD2 diagnostic scanner designed for comprehensive vehicle system analysis. This tool supports diagnostics for Engine, Anti-lock Braking System (ABS), Supplemental Restraint System (SRS), and Transmission systems. It features full bi-directional control capabilities and offers lifetime free software updates to ensure compatibility with the latest vehicle models and diagnostic functions.

Caracteristicile cheie includ:

• 4-Diagnosticarea sistemului: Covers Engine, ABS, SRS, and Transmission.
• 12 Reset Functions: Includes ABS Bleeding, Airbag Reset, Battery Matching, Brake-pad Reset, DPF Regeneration, Electronics Throttle Adaption, Gearbox Learning, Anti-theft/Key Matching, Injector Coding, Oil Reset, Steering Angle Reset, and TPMS Reset.
• CAN FD & FCA SGW Support: Ensures compatibility with modern vehicle communication protocols.
• Actualizări gratuite pe viață: Provides continuous software enhancements and vehicle coverage.
• Control bidirecțional: Allows the tool to send commands to vehicle systems for active testing.

2. Configurare

Follow these steps to set up your THINKCAR THINKSCAN 662 OBD2 Scanner:

1. Unboxing: Carefully remove the THINKSCAN 662 device, the OBD2 diagnostic cable, and the USB charging cable from the packaging.
2. Alimentarea dispozitivului: The device is corded and charges directly from the vehicle's OBD2 port. Connect the diagnostic cable to the 9-pin serial connector port located at the top of the THINKSCAN 662 device.
3. Conectarea la vehicul: Locate your vehicle's OBD2 port (typically under the dashboard on the driver's side). Plug the other end of the diagnostic cable into the vehicle's OBD2 port. Ensure the vehicle's ignition is in the 'ON' position (engine can be off or running, depending on the diagnostic task).
4. Pornire inițială: The device will power on automatically once connected to the vehicle. If not, press the power button located on the top right side of the device.
5. Încărcare: The device charges via the OBD2 port when connected to a vehicle. A separate USB charging cable is provided for software updates or if external charging is required. The device also features a USB port and an SD card slot on the side for data transfer and storage.

Figura 1: The THINKCAR THINKSCAN 662 OBD2 Scanner showing its main unit, diagnostic cable, and key feature icons.

3. Instrucțiuni de utilizare

The THINKSCAN 662 features a 6.2-inch touchscreen display for intuitive navigation. Use the touchscreen or the physical buttons on the right side of the device to interact with the menus.

3.1. Navigare prin meniul principal

The main menu provides access to various functions:

• Diagnostica: Inițiază diagnosticarea vehiculului.
• Întreţinere: Accesses special reset and service functions.
• Upgrade: For software updates.
• Mai mult: Contains additional tools and settings.

3.2. Diagnosticarea vehiculelor

To perform a vehicle diagnostic scan:

1. Din meniul principal, selectați Diagnostica.
2. Alege Căutare automată to automatically identify the vehicle's VIN, make, model, and year for quick access to diagnostics. Alternatively, select Diagnostica for manual vehicle selection or OBD for standard OBD2 functions.
3. After vehicle identification, you can select from options like Raport de sănătate, Scanare sistem, sau Selectarea sistemului.
4. A Raport de sănătate or Scanare sistem will quickly communicate with available modules (e.g., Engine Control Module (ECM), Transmission Control Module (TCM), Electronic Brake Control Module (EBCM), Inflatable Restraint Sensing And Diagnostic Module (IRSDM)) to check for Diagnostic Trouble Codes (DTCs).
5. La view live data, navigate to the Modulul de control al motorului (ECM) or other relevant module, then select Citiți fluxul de date. You can select specific data parameters (PIDs) to monitor. The device supports displaying up to four data streams simultaneously in a graphical format. You can switch between Metric and Imperial units.
6. For active testing, select Test de acționare within a module. This allows you to send commands to specific components (e.g., Air Conditioning (A/C) Compressor Clutch Relay, Cooling Fan, Fuel System) to verify their functionality.

4. Întreținere și funcții speciale

The THINKSCAN 662 offers 12 specialized maintenance functions to assist with common service tasks:

• Sângerare ABS: Used to push air out of the ABS pump after brake system work.
• Airbag Reset (SRS): Resets the Supplemental Restraint System after repairs.
• Battery Matching (BMS): Registers a new battery with the vehicle's battery management system.
• Brake-pad Reset (EPB): Retracts electronic parking brake calipers for pad replacement.
• DPF Regeneration (DPF): Initiates the Diesel Particulate Filter regeneration process.
• Electronics Throttle Adaption (ETS): Performs a relearn procedure for the electronic throttle body.
• Gearbox Learning (GEARBOX): Adaptează unitatea de control a transmisiei după reparații sau înlocuire.
• Anti-theft/Key Matching (IMMO): Programs new keys or immobilizer components.
• Injector Coding (INJEC): Codes new injector values into the engine control unit.
• Oil Reset (OIL): Resetează martorul luminos de service al uleiului după un schimb de ulei.
• Steering Angle Reset (SAS): Calibrează senzorul de unghi de direcție.
• TPMS Reset (TPMS): Resetează sistemul de monitorizare a presiunii în anvelope după rotația anvelopei sau înlocuirea senzorului.

5. Depanare

If you encounter issues with your THINKSCAN 662, consider the following:

• Dispozitivul nu pornește: Ensure the diagnostic cable is securely connected to both the device and the vehicle's OBD2 port. Verify the vehicle's ignition is on. The device draws power from the OBD2 port.
• Erori de comunicare: Check all cable connections. Ensure the vehicle's ignition is in the correct position. Try a different vehicle to rule out a vehicle-specific issue.
• Probleme de software: Utilizați Upgrade function to ensure your device has the latest software. Lifetime free updates are available.
• Citiri/funcții incorecte: Confirm the correct vehicle information (VIN, make, model, year) has been automatically or manually selected.
• Fault Code Library: Utilizați Biblioteca de coduri de eroare OBD sub Mai mult menu to look up definitions for any retrieved DTCs.

6. Specificații

7. Garanție și asistență

For technical assistance, warranty information, or product support, please refer to the official THINKCAR website or contact their customer service. The device includes a Asistență de la distanță feature accessible via the 'More' menu, allowing technical support to connect to your device remotely if needed. An Serviciu Online option is also available for direct support.