HOTO PixelDrive Electric Screwdriver User Manual

Introducere

This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your HOTO PixelDrive Electric Screwdriver, Model QWLSD014. Please read this manual thoroughly before using the product and retain it for future reference.

Produs terminatview

Figure 1: HOTO PixelDrive Electric Screwdriver with included 30-piece bit set and cylindrical storage case.

Caracteristici cheie:

• Afișaj inteligent: Shows real-time torque levels and battery charge.
• Cuplu reglabil: Six levels from 0.5 N·m to 6 N·m for various tasks.
• Control dublu al vitezei: 80 RPM for precision (half-press) and 200 RPM for efficiency (full-press).
• Set de biți cu 30 de piese: Includes 10 C6.3x25mm and 20 C6.3x50mm bits, organized in a triple-layer cylindrical case.
• Lumină LED integrată: 360-degree illumination for dark or confined spaces.
• Baterie reîncărcabilă: 2000 mAh Lithium-Ion battery with USB-C charging.

Componente incluse:

• 1 x HOTO PixelDrive Cordless Screwdriver
• 1 x 30-Piece Screwdriver Bit Set (10 x C6.3x25mm, 20 x C6.3x50mm)
• 1 x USB-C Charging Cable (not explicitly listed but implied by USB-C charging)

Figura 2: Explodat view illustrating the screwdriver and its organized bit storage system.

Înființat

1. Charging the Screwdriver:

Before first use, fully charge the HOTO PixelDrive Electric Screwdriver. Connect the provided USB-C cable to the charging port located at the bottom of the screwdriver and plug the other end into a compatible USB power adapter (not included). The smart display will indicate the battery charge status during charging.

Figure 3: The screwdriver features a 2000 mAh battery and a convenient USB-C charging port.

2. Bit Installation:

1. Open the cylindrical bit storage case by rotating the sections.
2. Selectați bitul de șurubelniță potrivit pentru sarcina dvs.
3. Insert the chosen bit into the magnetic bit holder at the tip of the screwdriver. Ensure it is securely seated.

Figure 4: Visual guide for opening the bit cylinder, attaching a bit, and adjusting torque.

Instrucțiuni de operare

1. Power On/Off and Torque Adjustment:

• Rotate the ring at the top of the screwdriver to select one of the six torque levels (0.5 N·m to 6 N·m). The smart display will show the selected torque.
• To turn off the screwdriver, rotate the ring to the "OFF" position.

Figure 5: The smart display provides real-time feedback on torque and battery life.

2. Speed Control (Dual Speed):

• The screwdriver features a dual-speed trigger.
• Apăsare pe jumătate: Activates the low speed (80 RPM) for precision work.
• Apăsare completă: Activates the high speed (200 RPM) for faster operation and increased productivity.

Figure 6: Dual-speed control allows for precise or rapid operation based on trigger pressure.

3. Switching Torque Units (N·m / lb-in):

To switch between Newton-meters (N·m) and Inch-pounds (lb-in) on the smart display, press and hold both the forward and reverse buttons simultaneously for 3 seconds. Wake the screen with a forward/reverse press, then adjust torque.

Figure 7: Instructions for switching between N·m and lb-in torque units on the smart display.

4. Recommended Torque Settings for Various Applications:

Figure 8: Torque level guide for various tasks and compatible bit types.

Întreţinere

• Păstrați șurubelnița și biții curate și uscate. Ștergeți cu o lavetă moale și uscată.amp pânză.
• Store the screwdriver and bits in their original cylindrical case to prevent loss and damage.
• Evitați expunerea dispozitivului la temperaturi extreme, lumina directă a soarelui sau umiditate.
• Regularly check the bits for wear and replace them if they become dull or damaged.

Depanare

Specificații

• Nume model: QWLSD014
• Marca: FOTO
• Material: Aluminiu
• Greutatea articolului: 11.2 uncii (317 grame)
• Dimensiuni produs: 1.5 x 1.5 x 7.8 inci
• Baterie: 1 baterie litiu-ion (inclusă), 2000 mAh
• Sursa de alimentare: Alimentat cu baterie (reîncărcabil USB-C)
• Voltage: 4 volți
• Gama de cuplu: 0.5 - 6 N·m (up to 50 Inch Pounds)
• Viteză: Dual-speed (80 RPM / 200 RPM)
• Caracteristici speciale: Adjustable Torque, Dual-Speed Control, LED Light, Smart Display
• Componente incluse: 1 × PixelDrive Cordless Screwdriver, 30-Piece Screwdriver Bit Set (10 × C6.3 × 25mm, 20 × C6.3 × 50mm)

Informații de siguranță

• Always wear appropriate safety gear, such as safety glasses, when operating power tools.
• Păstrați zona de lucru curată și bine iluminată. Zonele aglomerate sau întunecate provoacă accidente.
• Nu folosiți sculele electrice în atmosfere explozive, cum ar fi în prezența lichidelor, gazelor sau prafului inflamabile.
• Țineți copiii și trecătorii departe în timp ce utilizați o unealtă electrică. Distragerile vă pot face să pierdeți controlul.
• Păstrați sculele electrice inactive la îndemâna copiilor și nu permiteți persoanelor care nu sunt familiarizate cu unealta electrică sau cu aceste instrucțiuni să opereze unealta electrică.
• Use the correct bit for the application. Forcing the tool may cause damage or injury.
• Do not disassemble or modify the screwdriver. Repairs should only be performed by qualified personnel.

Videoclipuri oficiale despre produse

Garanție și suport

For warranty information and customer support, please refer to the official HOTO website-ul lor web sau contactați direct serviciul lor de asistență pentru clienți. Păstrați bonul fiscal ca dovadă a achiziției pentru orice reclamații în garanție.

Manufacturer: HOTO