Introducere
This manual provides detailed instructions for the safe and efficient use of your Cecotec Conga X50 Robot Vacuum and Mop. Please read this manual thoroughly before operating the device and retain it for future reference.
The Cecotec Conga X50 is an advanced robotic cleaning system designed to vacuum and mop various floor types. It features laser navigation for precise mapping, powerful suction, rotating mops for effective scrubbing, and a 4-in-1 self-emptying base for autonomous maintenance.
Conținutul pachetului
Verificați dacă toate componentele sunt prezente în pachet:
- Conga X50 Robot Vacuum and Mop
- Self-Emptying Base with 2 tanks (clean water and dirty water)
- Dust Bag (pre-installed or spare)
- Pensulă laterală
- 2 Rotating Mops
- Cablu de alimentare
- Perie de curățare
- Manual de utilizare (acest document)
Image: The Cecotec Conga X50 robot vacuum and mop, its self-emptying base, and included accessories such as dust bags, side brush, and rotating mops.
Înființat
1. Despachetarea și plasarea
- Scoateți cu grijă toate componentele din ambalaj.
- Choose a suitable location for the self-emptying base. Ensure it is against a wall, with at least 1 meter (3 feet) of clear space on either side and 1.5 meters (5 feet) in front, free from obstacles.
- Connect the power cable to the base and plug it into a power outlet.
- Place the robot onto the charging contacts of the base to charge fully before first use.
Image: The self-emptying base connected to power, with the robot docked for charging. This illustrates the recommended placement for optimal operation.
2. Initial Robot Preparation
- Install the side brush by pressing it into its designated slot on the underside of the robot.
- Attach the rotating mops to the mop holders on the robot's underside. Ensure they are securely fastened.
Image: The underside of the Conga X50 robot, highlighting the main brush, side brush, and the two rotating mops in position.
3. App Connection (Bluetooth & WiFi)
- Download the "Cecotec Conga" app from your smartphone's app store.
- Creează un cont sau conectează-te.
- Follow the in-app instructions to add your Conga X50 robot. This typically involves enabling Bluetooth on your phone and connecting the robot to your home's 2.4 GHz WiFi network.
Image: A smartphone screen displaying the Cecotec Conga app interface, showing the robot's status and mapping features, indicating successful app connection.
Instrucțiuni de operare
1. First Use and Mapping
For the first cleaning cycle, allow the robot to complete a full cleaning run without interruption. This enables the laser navigation system to create an accurate map of your home.
Image: The Conga X50 robot using its laser navigation to map a room, showing a dog and a soccer ball as potential obstacles it detects.
2. Moduri de curățare
The robot offers various cleaning modes accessible via the app:
- Mod auto: Robotul curăță inteligent întreaga zonă cartografiată.
- Curățarea punctelor: Direcționează robotul să curățe intensiv o anumită zonă mică.
- Curățarea zonei: Allows you to define specific zones on the map for the robot to clean.
- Zone restricționate: Set virtual walls or no-go zones on the map to prevent the robot from entering certain areas.
Image: A smartphone displaying the Conga app with a detailed floor plan, illustrating how users can plan and schedule cleaning routes for the robot.
3. Suction and Mopping
- The robot features 15000 Pa suction power for effective vacuuming.
- The rotating mops provide thorough scrubbing for hard floors.
- Detectarea covorului: The robot automatically detects carpets and increases suction power while lifting the mops to prevent wetting the carpet.
Image: Close-up of the Conga X50's underside, showing the two rotating mops actively scrubbing the floor, with arrows indicating their rotational movement.
Image: The Conga X50 robot approaching a carpet, with an upward arrow indicating its mops are being lifted to avoid wetting the carpet while vacuuming.
Întreţinere
1. Self-Emptying Base Maintenance
- Sac de praf: The base automatically empties the robot's dustbin into a disposable dust bag. Replace the dust bag when full.
- Rezervor de apă curată: Refill the clean water tank (4 L capacity) with fresh water as needed.
- Rezervor de apă murdară: Empty and clean the dirty water tank (3.5 L capacity) regularly to prevent odors and germ buildup.
- The base also dries the mops to prevent odors.
Image: The self-emptying base of the Conga X50, showing the transparent clean water tank filled with blue water and the dirty water tank, indicating its autonomous maintenance capabilities.
2. Curățarea componentelor robotului
- Perie principală: Regularly remove hair and debris from the main brush using the provided cleaning tool.
- Perie laterală: Check for tangled hair or debris and clean as necessary. Replace if worn.
- Rotating Mops: Remove and wash the mops after each mopping cycle. Allow them to air dry completely before reattaching.
- Senzori: Wipe the robot's sensors (laser, cliff, and anti-collision) with a dry, soft cloth to ensure optimal navigation.
- Filtru HEPA: Tap out dust from the HEPA filter periodically. Replace the filter every 3-6 months, depending on usage.
Image: Close-up of the Conga X50's main brush, showing debris being collected, emphasizing the importance of regular cleaning for optimal performance.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Robotul nu pornește. | Baterie descărcată sau încărcată necorespunzător. | Ensure the robot is correctly docked on the charging base and fully charged. Check power connection to the base. |
| Robotul se blochează frecvent. | Obstacles, tangled cables, or dirty sensors. | Clear the cleaning area of cables and small objects. Clean all sensors on the robot. |
| Performanță slabă de curățare. | Full dustbin, dirty brushes/mops, or clogged filter. | Empty the dust bag in the base. Clean the main brush, side brush, and mops. Clean or replace the HEPA filter. |
| Funcția de ștergere nu funcționează. | Empty clean water tank, dirty mops, or pump issue. | Refill the clean water tank. Clean the rotating mops. If the issue persists, contact customer support. |
| Probleme de conectare la aplicație. | Incorrect WiFi password, 5GHz network, or Bluetooth off. | Ensure your phone's Bluetooth is on. Verify you are connecting to a 2.4 GHz WiFi network. Re-enter WiFi password. Restart robot and router. |
Specificații
| Caracteristică | Detaliu |
|---|---|
| Marca | Cecotec |
| Numele modelului | Conga X50 |
| Numărul de model | A01_EU01_114480 |
| Puterea de aspirare | 15000 Pa |
| Tehnologia de navigație | Laser |
| Sistem de curățare | Rotating Mops |
| Self-Emptying Base Capacity (Dust) | 2.5 L |
| Self-Emptying Base Capacity (Clean Water) | 4 L |
| Self-Emptying Base Capacity (Dirty Water) | 3.5 L |
| Battery Runtime (ECO mode) | Până la 240 de minute (4 ore) |
| Cleaning Area Coverage | Până la 240 m² |
| Conectivitate | Bluetooth, WiFi (2.4 GHz) |
| Tip filtru | HEPA |
| Voltage | 220 volți |
| Greutatea produsului | 3 kg |
| Culoare | Negru |
Garanție și suport
Pentru informații despre garanție, vă rugăm să consultați cardul de garanție inclus împreună cu produsul sau să vizitați site-ul oficial Cecotec. website. For technical support, troubleshooting assistance, or to order replacement parts, please contact Cecotec customer service through their official channels.
Puteți găsi mai multe informații și date de contact pe Cecotec Official Store on Amazon.
