Introducere
This manual provides detailed instructions for the safe and effective use of your WUBEN E7 and WUBEN L3 Rechargeable Flashlight Bundle. Please read this manual thoroughly before operating the flashlights and retain it for future reference.
Image: The WUBEN E7 mini flashlight and the WUBEN L3 tactical flashlight shown together.
Înființat
WUBEN L3 Battery Installation & Initial Charge
- Îndepărtați izolația bateriei: Unscrew the tail cap of the WUBEN L3 flashlight. Locate and remove the blue insulation sheet covering the battery. This sheet prevents battery discharge during shipping.
- Reinsert Battery: Ensure the battery is inserted with the positive (+) end facing towards the head of the flashlight.
- Capac de siguranță pentru coadă: Screw the tail cap back on tightly. The flashlight features a weather-sealing O-ring to ensure water resistance when properly closed.
- Încărcare inițială: Twist the ring near the head of the L3 flashlight to reveal the USB-C charging port. Connect the provided Type-C charging cable to the port and a compatible USB power source. The indicator light will be red during charging and turn blue when fully charged. Charging from empty to full takes approximately 100-160 minutes depending on the charger (e.g., 9V/2A: ~100 mins, 5V/2A: ~160 mins).
Image: The WUBEN L3 flashlight being charged via its USB-C port, illustrating its fast-charging feature.
WUBEN E7 Initial Charge
The WUBEN E7 also features a USB-C charging port. Connect it to a compatible USB power source using the provided cable. Refer to the indicator light for charging status (red for charging, blue for fully charged).
Attaching Accessories (WUBEN L3)
- Prinzătoare de curea: The L3 flashlight comes with a removable belt clip for convenient carrying. It can be attached or removed by sliding it along the body of the flashlight.
- Şnur: A lanyard is included for added security and ease of access. Attach it to the designated loop on the tail cap.
Instrucțiuni de operare
WUBEN L3 Flashlight Operation
The WUBEN L3 is controlled by a single tail switch button.
- Momentan activat: Tap the tail switch button for momentary illumination. The light will turn off when the button is released.
- Pornit/Oprit constant: Fully press and click the tail switch button to turn the flashlight on or off.
- Mode Switching (Low, Medium, High): When the flashlight is on, lightly tap the tail switch (without clicking) to cycle through the brightness modes: Moon (5 lumens) → Scăzut (150 lumeni) → Mediu (500 lumeni) → Ridicat (1500 lumeni). The flashlight will remember the last used mode when turned off and on again.
- Turbo Mode (3000 lumens): From any mode, press and hold the tail switch for approximately 0.5 seconds to activate Mod turbo (3000 lumens). Release the button to return to the previously used mode. Note: The L3 will automatically step down from 1500 lumens (High mode) to 1100 lumens after 4 minutes to prevent overheating.
- Modul stroboscopic: Double-click the tail switch to activate Modul stroboscopic.
- Modul SOS: Triple-click the tail switch to activate Mod SOS.
WUBEN E7 Flashlight Operation
The WUBEN E7 offers 6 lighting modes and a memory function.
- Comutarea modului: Click the switch and long press to trigger gear selection (specific details on button interaction for E7 are not fully provided in the source, but generally implies cycling through modes).
- Super Bright Mode: Double-click the switch to activate Super Bright mode (1800 lumeni).
- Burst Flash Mode: Triple-click the switch to activate Burst Flash mode (Strobe).
- Funcția de blocare: Four consecutive clicks will lock the flashlight to prevent accidental activation.
- Funcția de memorie: The E7 will remember the last used brightness mode when turned off and on.
Image: Key features of the WUBEN E7, including maximum output, beam distance, runtime, drop resistance, waterproofing, and floodlight angle.
Power Bank Function (WUBEN L3)
The WUBEN L3 can function as a power bank to charge other devices.
- Activează bateria externă: Twist the ring near the head of the L3 flashlight to reveal the USB-C port. Connect your device (e.g., smartphone) to the L3 using a compatible USB-C cable.
- Ieșire: The L3 provides up to 18W output for charging. Note that actual output may vary depending on the connected device and cable.
Image: The WUBEN L3 flashlight connected to a smartphone, demonstrating its capability to act as a backup power source.
Întreţinere
- curatenie: Curățați regulat corpul lanternei cu o lavetă moale șiamp cloth. Keep the lens free of dust and debris for optimal light output.
- O-Ring Maintenance: The L3 flashlight uses O-rings for waterproofing. Periodically inspect the O-rings for wear and tear. Lubricate them with silicone grease if necessary to maintain the IP68 rating. Replacement O-rings are included in the package.
- Îngrijirea bateriei: Store the flashlights in a cool, dry place. If storing for extended periods, charge the batteries to approximately 50% capacity to prolong their lifespan. Avoid fully discharging the batteries.
- Hidroizolarea: Both E7 and L3 models are IP68 rated, meaning they are protected against dust ingress and can withstand immersion in water up to 2 meters for 1 hour. Ensure all caps and ports are securely closed before exposing the flashlights to water.
Image: WUBEN E7 flashlights showcasing their magnetic base and IP68 waterproof design in a rainy environment.
Depanare
- Lanterna nu se aprinde:
- Ensure the battery insulation sheet has been removed (for L3).
- Verificați dacă bateria este introdusă corect, respectând polaritatea.
- Verify the battery is charged. Refer to the power indicator.
- For E7, check if the lock function is activated (four clicks to unlock).
- Flashlight Overheating (L3): The L3 is designed to automatically reduce brightness from 1500 lumens (High mode) to 1100 lumens after 4 minutes to manage heat. This is a normal safety feature. If the flashlight becomes excessively hot to touch, turn it off and allow it to cool down.
- Probleme de încărcare:
- Asigurați-vă că cablul USB-C este conectat în siguranță atât la lanternă, cât și la sursa de alimentare.
- Încercați un alt cablu USB-C sau un adaptor de alimentare.
- Verificați dacă portul de încărcare este curat și fără resturi.
- Power Bank Function Not Working (L3): Ensure the L3 battery has sufficient charge. Some devices may require specific charging protocols not fully supported by the L3's 5V output.
Specificații
WUBEN E7 Mini Flashlight
- Ieșire maximă: 1800 lumeni
- LED: P9 High Color Rendering 6500K LED
- Floodlight Angle: Ultra-wide de 175°
- Moduri: High/Med/Low/Super Bright/Strobe/SOS (6 modes with memory function)
- Evaluare rezistentă la apă: IP68
Image: Comparison of light output and color temperature from the WUBEN E7, showing Cool White 6500K and Medium White 5000K.
WUBEN L3 Tactical Flashlight
- Ieșire maximă: 3000 lumeni
- Distanța maximă a fasciculului: 226 metri
- Baterie: 4800mAh Rechargeable Li-ion (21700, 3.7V, 17.76Wh)
- Încărcare: Dual-way USB-C (Max 18W input/output)
- Moduri: Turbo/High/Med/Low/Moon/Strobe/SOS (7 modes with mode memory)
- Evaluare rezistentă la apă: IP68
- Material: III MIL-Spec Anodized Finish
Image: The WUBEN L3 flashlight demonstrating its ultra-bright output of 3000 lumens over a significant distance in an outdoor setting.
Garanție și suport
For warranty information, technical support, or any inquiries regarding your WUBEN E7 & L3 Flashlight Bundle, please refer to the official WUBEN website or contact WUBEN customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
You can visit the official WUBEN store for more information: WUBEN Store
