1. Introducere
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Topaz RDL6-12W-CS LED Slim Fit Recessed Downlight. Please read this manual thoroughly before installation and retain it for future reference. This product is designed for both residential and commercial indoor applications, including wet locations.
2. Informații de siguranță
AVERTIZARE: Risk of fire or electric shock. Installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
- Deconectați alimentarea la siguranța sau întrerupătorul de circuit înainte de instalare sau service.
- Ensure all electrical connections are made in accordance with local codes and ordinances, as well as the National Electric Code (NEC).
- Nu faceți sau modificați orificii deschise într-o carcasă de cabluri sau componente electrice în timpul instalării kit-ului.
- Pentru a preveni deteriorarea sau abraziunea cablurilor, nu expuneți cablurile la marginile tablei sau la alte obiecte ascuțite.
- This fixture is intended for use with a 120V AC, 60Hz circuit.
- Potrivit pentru locuri umede.
- Airtight certified per ASTM-E283.
3. Conținutul pachetului
Verificați dacă toate componentele sunt prezente înainte de a începe instalarea:
- 1x LED Slim Fit Recessed Downlight (Model: RDL6-12W-CS)
- 1x Remote J-box
4. Specificații
| Caracteristică | Caietul de sarcini |
|---|---|
| Numele modelului | LED Slim Fit Recessed Downlight |
| Numărul piesei | RDL6-12W-CS |
| Marca | Topaz |
| Wattage | 12 wați |
| Luminozitate | 1000 lumeni |
| Voltage | 120 volți |
| CCT selectabil | 5 CCT (2700K to 5000K) |
| Reglabil | Da, până la 5% |
| Material | Aluminiu |
| Culoare | Alb |
| Dimensiunile produsului | 7.09 cm L x 7.09 cm l x 0.73 cm Î |
| Greutatea articolului | 1.35 lire sterline |
| Utilizare în interior/exterior | Indoor (Suitable for wet locations) |
| Certificari | Certificat etanș conform ASTM-E283 |
5. Instrucțiuni de instalare
Before starting, ensure power is turned off at the circuit breaker.
Pregătiți deschiderea: Cut a 6-inch diameter hole in the ceiling at the desired location. Ensure there are no obstructions such as joists or wiring within the ceiling space.
Image: The Topaz RDL6-12W-CS LED Slim Fit Recessed Downlight, showing the circular light fixture and the separate remote junction box connected by a cable. The junction box has wiring instructions and certifications visible.
Connect the Remote J-box: Open the remote junction box cover. Connect the supply wires (black to black, white to white, ground to ground) from your electrical circuit to the wires inside the J-box using appropriate wire connectors. Secure the J-box cover.
Selectați temperatura de culoare (CCT): Before inserting the fixture into the ceiling, locate the CCT selectable switch on the remote J-box. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch. This setting can be changed later if needed.
Position the J-box: Place the remote J-box into the ceiling opening, ensuring it rests securely above the ceiling tile or drywall.
Install the Downlight: Connect the cable from the downlight to the remote J-box. Push the spring clips on the sides of the downlight upwards and insert the fixture into the ceiling hole. Release the clips to secure the downlight flush against the ceiling.
Imagine: Un profesionist secundarfile view of the Topaz RDL6-12W-CS LED Slim Fit Recessed Downlight, highlighting the two spring-loaded clips on either side used for securing the fixture into the ceiling opening.
Restabiliți puterea: Reconectați alimentarea la întrerupătorul de circuit. Testați corpul de iluminat.
6. Funcționare
6.1 Pornire/Oprire
The downlight operates like any standard light fixture. Use your wall switch to turn the light on or off.
6.2 CCT (Color Correlated Temperature) Selection
The RDL6-12W-CS features 5 CCT selectable options. As mentioned in the installation section, the desired color temperature is selected via a switch on the remote J-box. To change the CCT after installation, you will need to access the J-box (typically by carefully pulling the downlight out of the ceiling to reach the J-box if it's placed nearby, or accessing it from above if possible) and adjust the switch to one of the following settings:
- 2700K (alb cald)
- 3000K (alb moale)
- 3500K (alb neutru)
- 4000K (alb rece)
- 5000K (lumina zilei)
6.3 Funcționalitate de reglare a intensității luminoase
This downlight is dimmable down to 5% when used with compatible LED dimmers. For optimal performance, ensure your dimmer switch is designed for LED lighting. Refer to your dimmer's instructions for proper installation and operation.
7. Întreținere
The Topaz RDL6-12W-CS LED Slim Fit Recessed Downlight requires minimal maintenance.
- curatenie: Asigurați-vă că alimentarea este oprită înainte de curățare. Ștergeți dispozitivul cu o lavetă moale, uscată sau ușor umedă.amp cloth. Do not use harsh chemicals or abrasive cleaners, as these may damage the finish or electrical components.
- Fără piese reparabile de utilizator: There are no user-serviceable parts inside this fixture. Do not attempt to open or repair the unit.
8. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Lumina nu se aprinde. | Nicio putere la corp. Conexiunea cablajului slab. Faulty switch or circuit breaker. | Check if the circuit breaker is tripped. Ensure wall switch is on. Verify all wiring connections are secure. Consult a qualified electrician if the issue persists. |
| Lumina pâlpâie sau se estompează inconsistent. | Variator de intensitate luminos incompatibil. Conexiunea cablajului slab. | Ensure you are using an LED-compatible dimmer. Check wiring connections. If flickering persists, try a different dimmer or consult an electrician. |
| Incorrect CCT (Color Temperature). | CCT switch on J-box set incorrectly. | Access the remote J-box and adjust the CCT selectable switch to the desired setting. |
9. Garanție și asistență
This Topaz RDL6-12W-CS LED Slim Fit Recessed Downlight comes with a 5-year warranty from the date of purchase, covering defects in materials and workmanship under normal use. For warranty claims or technical support, please contact Topaz customer service directly. Keep your proof of purchase for warranty validation.
For further assistance, please visit the official Topaz website-ul sau contactați serviciul de asistență pentru clienți.
