GEPRC Vapor-D6 O4 Pro FPV Drone User Manual

1. Introducere

This manual provides essential information for the safe and effective operation of your GEPRC Vapor-D6 O4 Pro FPV Drone. Please read this manual thoroughly before operating the drone to ensure proper setup, flight, and maintenance. This drone is designed for advanced users and offers enhanced image clarity, stability, and agility for FPV racing and cinematic aerial footage.

2. Informații de siguranță

• Verificare înainte de zbor: Always inspect the drone for any damage, loose parts, or obstructions before each flight. Ensure propellers are securely attached and free from cracks.
• Siguranța bateriei: Use only recommended 6S LiPo 1500mAh – 2000mAh batteries. Do not overcharge or over-discharge batteries. Store batteries in a safe, fireproof location.
• Mediul de zbor: Fly in open areas, away from people, animals, buildings, and power lines. Avoid flying in strong winds or adverse weather conditions.
• Linia de vedere: Maintain visual line of sight with your drone at all times, even when using FPV goggles.
• Propeller Hazard: Keep hands and face clear of propellers when motors are armed. Propellers can cause serious injury.
• Regulamente locale: Adhere to all local aviation laws and regulations regarding drone operation.
• Nivelul de aptitudine: This drone is intended for advanced users. Beginners should seek guidance from experienced pilots.

3. Conținutul pachetului

Verificați dacă toate articolele sunt prezente în colet:

• 1 x GEPRC Vapor-D6 O4 Pro FPV Drone
• 2 x HQprop 6X3.5X3 Propellers
• 2 x Battery Anti-Slip Pads
• 1 x Spare Screw Pack (includes: 6 x M3*10mm round head screws, 6 x M3*8mm round head screws, 2 x M3*6mm flat head screws, 1 x M5*28mm thin head screw, 1 x M5 flange nut, 4 x M3 rivet nuts)
• 1 x Vapor Side Panel
• 2 x M20*250mm Battery Straps
• 1 x șurubelniță în formă de L de 1.5 mm
• 1 x șurubelniță în formă de L de 2.0 mm
• 1 x GoPro Mount

4. Produs terminatview

The GEPRC Vapor-D6 O4 Pro is a high-performance FPV racing quadcopter designed for seamless integration with the O4 Air Unit Pro VTX. It features a robust carbon fiber frame, anti-vibration design, and powerful motors for dynamic flight.

Figura 1: De sus în jos view of the GEPRC Vapor-D6 O4 Pro FPV Drone, showcasing its carbon fiber frame and propeller layout.

Figura 2: Înclinat view of the GEPRC Vapor-D6 O4 Pro FPV Drone, highlighting its integrated O4 Air Unit Pro and robust design.

Caracteristici cheie:

• O4 Air Unit Pro Integration: Designed for seamless integration with the O4 Air Unit Pro VTX, delivering enhanced image clarity and light sensitivity for immersive FPV racing and cinematic aerial shots.
• Design anti-vibrații: Features a precision-engineered aluminum lens housing and shock-absorbing silicone mounts to minimize vibrations, ensuring crisp, stable footage.
• Motoare de înaltă performanță: Equipped with SPEEDX2 E-series motors (2407E 1750KV) for smooth, responsive thrust and agility.
• Durable Carbon Fiber Frame: Built with reinforced 5mm carbon fiber arms and a robust layered plate design for exceptional durability and impact resistance.
• Stable Flight Performance: Factory-tuned PID controls ensure stable flight. Optional GPS module (GEP-M10) enables accurate positioning.

5. Configurare

5.1 Instalarea elicei

1. Asigurați-vă că drona este oprită și bateria este deconectată.
2. Identify the correct rotation direction for each propeller (CW and CCW).
3. Align the propeller with the motor shaft and press down firmly.
4. Secure the propeller with the provided propeller nuts, ensuring they are tightened but not overtightened.

5.2 Conectarea bateriei

1. Place a battery anti-slip pad on the top plate of the drone.
2. Secure the recommended 6S LiPo battery (1500mAh – 2000mAh) to the drone using the M20*250mm battery straps. Ensure the battery is centered and tightly secured.
3. Connect the XT60 battery connector to the drone's power port.

5.3 Receiver Binding (ELRS 2.4G / TBS Nano RX)

Refer to your specific receiver's manual for detailed binding instructions. Generally, the process involves:

1. Power on your remote controller and set it to binding mode.
2. Power on the drone. The receiver's LED should indicate it's ready for binding (e.g., flashing rapidly).
3. Initiate the binding process on your remote controller.
4. Once bound, the receiver's LED should turn solid, indicating a successful connection.

5.4 FPV System Setup (O4 Air Unit Pro)

Ensure your FPV goggles are compatible with the O4 Air Unit Pro Transmission Module. Power on your goggles and the drone. The video feed should automatically connect. Adjust channel and frequency settings if necessary via your goggles' menu.

6. Instrucțiuni de utilizare

6.1 Arming/Disarming Motors

To arm the motors, move both sticks on your remote controller to the bottom-right corner (or as configured in Betaflight). The motors will spin up slowly. To disarm, move both sticks to the bottom-left corner.

6.2 Comenzi de zbor de bază

• Regulator: Controls altitude (left stick up/down).
• Yaw: Rotates the drone left or right (left stick left/right).
• Pas: Tilts the drone forward or backward (right stick up/down).
• Rola: Tilts the drone left or right (right stick left/right).

6.3 Moduri avansate de zbor

The Vapor-D6 O4 Pro supports various flight modes configurable in Betaflight. Common modes include:

• Modul unghi: Self-leveling mode, suitable for stable cruising.
• Acro Mode: Manual mode, offering full control for freestyle and racing.
• GPS Rescue (with optional GPS): If equipped with the GEP-M10 GPS module, this mode can assist in returning the drone to a predefined home point in case of signal loss or emergency.

7. Întreținere

• Inspecția elicei: Regularly check propellers for any damage, bends, or cracks. Replace damaged propellers immediately.
• Inspecție cadru: Inspect the carbon fiber frame and arms for any signs of stress, cracks, or damage after hard landings or crashes.
• Curățarea motorului: Keep motors free from dirt, dust, and debris. Use compressed air or a soft brush to clean them.
• Strângerea șuruburilor: Periodically check all screws for tightness, especially those securing motors and frame components.
• Actualizări firmware: Keep your flight controller (GEP-F722-HD v2) and O4 Air Unit Pro firmware updated to the latest versions for optimal performance and bug fixes.

8. Depanare

9. Specificații

10. Garanție și asistență

GEPRC products are manufactured to high standards. For warranty claims or technical assistance, please contact GEPRC customer support. Our support team is available to assist with setup and troubleshooting.

For immediate assistance, refer to the official GEPRC website or contact their customer service channels. Keep your proof of purchase for any warranty-related inquiries.