Introducere
Thank you for choosing the EZ EAR 2M Type C IEM Cable and KZ EDX PRO Wired Earbuds. This manual provides essential information for the proper setup, operation, and maintenance of your audio equipment. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.
Produs terminatview
The EZ EAR 2M Type C IEM Cable is designed to provide a high-quality audio connection for In-Ear Monitors (IEMs) with 2-pin connectors, featuring a USB-C termination for broad compatibility with modern devices. The KZ EDX PRO Wired Earbuds are equipped with a 10mm dual magnetic circuit dynamic driver, engineered for enhanced bass and clear audio reproduction.
Image: The EZ EAR 2M Type C IEM Cable, showcasing its USB-C connector, inline remote with volume and playback controls, and the detachable 2-pin connectors for IEMs.
Image: A pair of KZ EDX PRO Wired Earbuds, featuring their ergonomic design and gold-colored accents.
Înființat
1. Connecting the Cable to the Earbuds
- Identify the 2-pin connectors on the EZ EAR cable and the corresponding sockets on the KZ EDX PRO earbuds. Ensure correct orientation (usually marked L for left and R for right, or with a small dot/indentation).
- Gently align the pins of the cable connector with the sockets on the earbud.
- Push firmly but carefully until the connectors are securely seated. Do not force the connection.
2. Conectarea la o sursă audio
- Locate the USB-C port on your audio device (e.g., smartphone, tablet, computer).
- Insert the USB-C plug of the EZ EAR cable into the device's USB-C port.
- Ensure the connection is firm. Your device should recognize the earbuds as an audio output device.
Operațiunea
Purtând căștile
- Insert the earbuds into your ears, ensuring a comfortable and secure fit. The cable is designed to loop over the ear for stability.
- Experiment with different ear tip sizes (if provided separately) to achieve the best seal for optimal sound quality and bass response.
Image: A person wearing the KZ EDX PRO earbuds, demonstrating the over-ear cable routing for a secure fit.
Using Inline Controls
The EZ EAR cable features an inline remote control for convenient audio management:
- Creștere volum (+): Press to increase audio volume.
- Volum scăzut (-): Press to decrease audio volume.
- Buton multifuncțional (centru):
- Single press: Play/Pause audio, Answer/End call.
- Double press: Skip to next track.
- Triple press: Go to previous track.
- Long press: Activate voice assistant (device dependent).
Performanță audio
The KZ EDX PRO earbuds are designed to deliver HIFI bass sound with a strong low-frequency density, rich texture, and powerful bass, thanks to their 10mm dual magnetic circuit dynamic driver. Ensure a proper earbud seal for the best audio experience.
Întreținere și îngrijire
- Curatenie: Regularly wipe the earbuds and cable with a soft, dry cloth. For ear tips, remove them and clean with mild soap and water, then dry completely before reattaching.
- Depozitare: When not in use, store the earbuds and cable in a clean, dry place, preferably in a protective case, to prevent tangling and damage.
- Îngrijirea cablurilor: Avoid sharp bends or excessive pulling on the cable, especially near connectors, to prevent internal wire damage. The cable's protective coating helps reduce noise from contact.
- Umiditate: Keep the product away from excessive moisture and liquids.
Depanare
- Fără sunet:
- Ensure the USB-C cable is fully inserted into your device.
- Check that the 2-pin connectors are securely attached to the earbuds.
- Verify your device's volume is not muted or set too low.
- Testați cu o altă sursă audio sau cu un alt dispozitiv pentru a exclude problemele specifice dispozitivului.
- Calitate slabă a sunetului / Lipsa basului:
- Ensure the earbuds are properly seated in your ears, forming a good seal. Try different ear tip sizes if available.
- Verificați dacă există resturi sau cerumen care blochează duzele căștilor.
- Inline Controls Not Responding:
- Ensure the cable is fully connected to your device.
- Some functions may be device-dependent. Check your device's settings.
Specificații
| Numele produsului | EZ EAR 2M Type C IEM Cable & KZ EDX PRO Wired Earbuds |
| Lungimea cablului | 2 meters (2M) |
| Cable Connector (Source) | USB tip C |
| Cable Connector (IEM) | 2-pin (QDC compatible) |
| Material cablu | High-quality, lightweight, pliable wire with protective coating |
| Earbud Driver | 10mm Dual magnetic circuit dynamic driver |
| Caracteristici sonore | HIFI Bass Sound, enhanced low-frequency density, rich texture |
| Design pentru căști | Resin inlaid metal technology, ergonomic |
| Compatibilitate | iPhone 15/16 series, all devices with USB-C interface |
| ASIN | B0F99SZX41 |
| Prima disponibilă | 10 aprilie 2025 |
Image: An exploded diagram of the KZ EDX PRO earbud, illustrating its internal structure and highlighting upgrades to appearance, cable interface, and configuration.
Informații de siguranță
- Evitați să ascultați la niveluri mari de volum pentru perioade lungi de timp pentru a preveni deteriorarea auzului.
- Nu utilizați căștile în situații în care incapacitatea de a auzi sunetele ambientale ar putea fi periculoasă (de exemplu, condusul, mersul cu bicicleta, mersul pe jos în trafic).
- A nu se lăsa la îndemâna copiilor și a animalelor de companie. Piesele mici pot prezenta pericol de sufocare.
- Do not attempt to disassemble or modify the product. This may void any potential warranty and cause damage.
Garanție și suport
Specific warranty information for this product is not provided within this manual. For details regarding warranty coverage, technical support, or service inquiries, please refer to the product packaging or contact the EZ EAR customer support directly through their official website-ul sau comerciantul de la care a fost achiziționat produsul.
