Manual de instrucțiuni pentru raportorul digital pentru unghiuri Dasqua 220°

1. Introducere

This manual provides detailed instructions for the safe and effective use of your Dasqua 220° Digital Angle Finder Protractor. Please read this manual thoroughly before operating the device and retain it for future reference. This tool is designed for precise angle measurement in various applications, including woodworking, metalworking, and construction.

2. Produs terminatview

The Dasqua Digital Angle Finder Protractor is a versatile measuring instrument featuring a 425mm sliding leg, dual bubble levels, and a backlit LCD for clear readings. It is built for durability and accuracy in demanding environments.

2.1 Caracteristici cheie

• Precise Angle Measurement: Measures angles up to 220° with an accuracy of ±0.2°.
• MTR/COM Modes: Dedicated modes for calculating double miter angles and compound errors.
• 425mm Sliding Leg: Facilitates measurements in tight spaces and offers smooth adjustments.
• Mecanism de blocare: Ensures angles are securely held for transfer.
• Dual Bubble Levels: For horizontal and vertical leveling, providing 1.5mm/m accuracy.
• LCD iluminat din spate: 0.1° resolution display for clear visibility in various lighting conditions.
• Construcție durabilă: IP54 waterproof housing, resistant to dust, water, and oil.

2.2 Componente

• Corpul principal: Houses the digital display and primary measuring arm.
• Sliding Leg (Extension Plate): Extends from the main body for measuring larger angles or reaching into confined spaces.
• Lock Knob: Secures the sliding leg at a desired angle.
• Display LCD: Shows digital angle readings and mode indicators.
• Butoane de control: (On-Off, Hold, 180°, MTR, COM) for various functions.
• Niveluri cu bule: One horizontal and one vertical for traditional leveling.

3. Configurare

3.1 Instalarea bateriei

The device requires 2 x 1.5V LR6 (AA) batteries for the digital display. To install:

1. Locate the battery compartment cover, typically on the side or back of the main body.
2. Deschide capacul.
3. Introduceți două baterii AA, asigurându-vă că polaritatea este corectă (+/-).
4. Închideți bine capacul compartimentului bateriei.

The bubble levels operate mechanically and do not require batteries.

3.2 Pornirea inițială

Apăsați tasta Pornit-Oprit button to power on the device. The backlit LCD will illuminate, displaying "0.0" or the current angle.

4. Instrucțiuni de utilizare

4.1 Basic Angle Measurement

1. Porniți dispozitivul.
2. Place the main body and the sliding leg against the surfaces whose angle you wish to measure.
3. Adjust the sliding leg until it aligns perfectly with the second surface.
4. Read the angle directly from the backlit LCD display.
5. Use the lock knob to secure the angle for transfer if needed.

4.2 MTR (Simple Miter) Mode

Apăsați tasta MTR button to enter Simple Miter Mode. This mode is useful for calculating the miter angle required for a joint. The display will show the miter angle (half of the measured angle) needed for a perfect joint.

4.3 COM (Compound Bevel Cutting) Mode

Apăsați tasta COM button to enter Compound Bevel Cutting Mode. This mode assists in calculating compound angles for complex cuts, such as crown molding or roof rafters. Refer to specific project requirements for interpreting the displayed values in this mode.

4.4 Funcția Hold

Apăsați tasta Ține button to freeze the current angle reading on the LCD. This is useful when measuring in awkward positions where reading the display directly is difficult. Press Ține din nou pentru a elibera citirea.

4.5 180° Supplementary Angle Display

Apăsați tasta 180° button to display the supplementary angle (180° minus the measured angle). This is useful for certain applications where the inverse angle is required.

4.6 Setarea la zero

To set the current position as the zero reference, fully close the angle finder and press the Pornit-Oprit button briefly. The display will reset to "0.0". This allows for relative angle measurements.

4.7 Using the Bubble Levels

The angle finder includes two traditional bubble levels for quick horizontal and vertical leveling. These levels operate independently of the digital display and do not require batteries. Align the tool with the surface and observe the bubble to determine level or plumb.

5. Întreținere

• curatenie: Wipe the device with a soft, dry cloth after each use. For stubborn dirt, a slightly damp Se poate folosi o lavetă. Evitați substanțele de curățare abrazive sau solvenții.
• Depozitare: Store the angle finder in its included storage bag in a dry, clean environment when not in use.
• Înlocuire baterie: Replace batteries when the display becomes dim or unresponsive. Remove batteries if the device will not be used for an extended period to prevent leakage.
• Evaluare IP54: The device is IP54 rated, meaning it is protected from dust ingress and splashing water from any direction. While durable, avoid submerging the device in water.

6. Depanare

7. Specificații

• Domeniu de măsurare: 0-220°
• Precizie: ±0.2°
• Rezoluţie: 0.1°
• Sliding Leg Length: 425mm
• Bubble Level Accuracy: 1.5 mm / m
• Sursa de alimentare: 2 x 1.5V LR6 (AA) batteries (for digital display)
• Material: Aluminiu
• Evaluare de protecție: IP54 (Dust and splash water resistant)
• Greutatea articolului: 1.28 lire sterline
• Dimensiuni pachet: 17.87 x 9.17 x 1.77 inci

8. Garanție și asistență

Dasqua products are manufactured to high-quality standards. For warranty information or technical support, please refer to the official Dasqua website-ul lor sau contactați departamentul lor de asistență pentru clienți. Păstrați bonul fiscal ca dovadă a achiziției.

Pentru asistență suplimentară, puteți vizita Dasqua Store on Amazon.