Introducere
This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your AIPER Scuba S1 Robot Pool & Wall Cleaner. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.
Produs terminatview
Caracteristici cheie
- Ultra-Thin Filtration: Equipped with an additional, replaceable 3-micron ultra-fine filter for capturing small debris, ensuring clear pool water.
- Durată de viață extinsă a bateriei: Provides up to 180 minutes of cleaning time on a single charge, suitable for larger pools.
- WavePath 2.0 Navigation: Intelligent navigation technology for efficient and systematic pool coverage, optimizing cleaning routes.
- Control inteligent al aplicației: Manage cleaning modes, receive Over-the-Air (OTA) updates, and monitor device status via a dedicated mobile application.
- Wall and Waterline Cleaning: Capable of cleaning both the pool floor and walls, including scrubbing above the waterline.
- Caterpillar Tracks: Enhanced mobility for navigating corners, drains, and uneven surfaces without getting stuck.
Image: The Scuba S1 highlighting its 180-minute extended battery duration for thorough cleaning.
Image: The Scuba S1 demonstrating its caterpillar tracks for superior mobility across various pool surfaces and obstacles.
Componente
The AIPER Scuba S1 consists of the main robotic unit, an internal dual filtration system, and a charging adapter. The robotic unit features a control panel, durable caterpillar tracks for movement, and brushes for scrubbing surfaces.
Image: The AIPER Scuba S1 robotic pool cleaner, showcasing its design and the accompanying mobile application for smart control.
Image: Illustration of the dual filtration system, highlighting the 3-micron ultrafine filter for fine debris and the 180-micron filter for larger particles.
Înființat
- Încărcare inițială: Before first use, fully charge the robot using the provided charging adapter. Ensure the charging port is dry before connecting. The battery indicator will show charging status.
- Instalarea filtrului: Ensure the desired filter (standard or ultrafine) is correctly installed in the filter basket. Refer to the "Maintenance" section for details on filter types and installation.
- Descărcarea aplicației și conectarea: Download the AIPER app from your device's app store. Follow the in-app instructions to pair your Scuba S1 cleaner via Bluetooth or Wi-Fi. This enables smart control and OTA updates.
- Plasarea în piscină: Gently lower the cleaner into the pool. Ensure it is fully submerged and air bubbles have escaped before starting operation.
Image: The AIPER app interface, illustrating options for mode control, OTA updates, cleaning logs, and device monitoring.
Instrucțiuni de operare
Pornirea unui ciclu de curățare
- Pornire manuală: Press the power button on the robot's control panel once it is submerged in the pool.
- Pornire aplicație: Open the AIPER app, select your Scuba S1, and choose your desired cleaning mode.
Image: The four available cleaning modes: Automatic (floor and wall), Floor Only, Wall Only, and ECO (periodic cleaning).
Moduri de curățare
- Automat: Cleans both the pool floor and walls, including the waterline.
- Doar etaj: Focuses cleaning solely on the pool floor.
- Numai perete: Cleans only the pool walls and waterline.
- Mod ECO: Provides periodic cleaning for ongoing maintenance.
The WavePath 2.0 navigation system optimizes the cleaning path for maximum coverage, ensuring no area is missed.
Image: Visual representation of WavePath 2.0 navigation, demonstrating its systematic cleaning pattern for superior pool coverage.
Image: The Scuba S1 performing wall and waterline cleaning, demonstrating its ability to scrub above the water surface.
Retrieving the Cleaner
Once the cleaning cycle is complete or the battery is low, the cleaner will typically move to the edge of the pool. Use the floating line or carefully pull the cleaner out of the water using its handle. Avoid pulling it out by the power cord (if applicable) or other delicate parts.
Întreţinere
Curățarea filtrului
Regular cleaning of the filter basket and filters is crucial for maintaining optimal cleaning performance.
- Remove the cleaner from the pool and open the filter compartment.
- Extract the filter basket.
- Rinse the filter basket and filters thoroughly with a garden hose. For the 3-micron ultrafine filter, handle with care as the fibers can be delicate.
- Ensure all debris is removed before reinserting the filters and closing the compartment.
Curățenie generală și depozitare
- Wipe down the exterior of the cleaner with a soft cloth after each use.
- Depozitați dispozitivul de curățare într-un loc răcoros și uscat, ferit de lumina directă a soarelui și de temperaturi extreme.
- Ensure the battery is charged periodically during long storage periods to maintain battery health.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Aparatul de curățat nu pornește. | Baterie descărcată; butonul de pornire nu a fost apăsat corect. | Charge the cleaner fully. Ensure the power button is pressed firmly. |
| Poor cleaning performance / Not picking up fine debris. | Clogged filter; incorrect filter type for debris; worn brushes. | Clean the filter basket and filters thoroughly. Ensure the 3-micron ultrafine filter is used for fine debris. Inspect and replace brushes if worn. |
| Cleaner gets stuck or moves erratically. | Obstruction; air trapped inside; software glitch. | Remove any large obstructions. Gently shake the cleaner to release trapped air. If using the app, check for and apply any available OTA updates. Try restarting the cleaner. |
| Aparatul de curățat nu se urcă eficient pe pereți. | Low battery; dirty brushes/tracks; water chemistry imbalance. | Ensure the battery is fully charged. Clean the caterpillar tracks and brushes. Check pool water chemistry (e.g., calcium hardness, pH). |
Specificații
- Nume model: Scuba S1
- Marca: AIPER
- Metoda de control: App
- Tip baterie: Ioni de litiu
- Battery Energy Content: 112.32 de wați-oră
- Greutate baterie: 735 grame
- Number of Lithium-ion Cells: 12
- Greutatea articolului: 7.7 kg (7 kg 700 g)
- Dimensiuni produs (Lxlxh): 40 x 23 x 45 cm
- Sursa de alimentare: Alimentat cu baterie
Garanție și suport
The AIPER Scuba S1 Robot Pool & Wall Cleaner comes with a 3 an garanție, providing peace of mind regarding its durability and performance.
For technical support, warranty claims, or further assistance, please contact AIPER customer service through their official website or the contact information provided with your purchase documentation. Ensure you have your model number (Scuba S1) and proof of purchase available when contacting support.
