Introducere
This manual provides instructions for the safe and efficient use of your Bostitch Titan Heavy Duty Metal Stapler. Please read this manual thoroughly before operating the stapler and retain it for future reference.
Image: The Bostitch Titan Heavy Duty Metal Stapler in black, accompanied by an ergonomic staple remover and stacks of both standard and extended staples.
Informații de siguranță
- Keep fingers clear of the stapling mechanism during operation.
- Do not attempt to staple materials thicker than the recommended capacity.
- Use only recommended staple sizes for optimal performance and to prevent jams.
- Store the stapler and staples out of reach of children.
Conținutul pachetului
Verificați dacă toate articolele sunt prezente în colet:
- 1 x Bostitch Titan Heavy Duty Metal Stapler (Black)
- 1 x Ergonomic Push-Style Staple Remover
- 1250 x 1/4" (6mm) Standard Staples
- 500 x 5/16" (8mm) Extended Staples
Image: A visual representation of the package contents, including the stapler, staple remover, and both standard and extended staples.
Caracteristicile produsului
- Construcție grea: Durable metal design for lasting performance.
- Capacitate mare: Staples up to 50 sheets using appropriate staples.
- Tehnologie fără blocaje: Engineered to prevent staple jams and misfires.
- Utilizare versatilă: Opens 180 degrees for tacking onto bulletin boards or crafting.
- Ergonomic Staple Remover: Included for comfortable and efficient staple removal.
Image: The stapler with callouts indicating its reliable performance (jam-free with reload indicator), durable metal construction, and 180-degree opening for tacking.
Setup: Loading Staples
- Open the Stapler: Lift the top cover of the stapler until it locks into an open position.
- Introduceți capse: Place a full strip of Bostitch B8 PowerCrown 1/4" (6mm) standard staples for 2-25 sheets, or 5/16" (8mm) extended staples for 26-50 sheets, into the staple channel. Ensure the staples are facing downwards.
- Close the Stapler: Gently push the top cover down until it clicks securely into place.
Note on Staple Selection:
- For 2-25 sheets: Use 1/4" (6mm) standard staples.
- For 26-50 sheets: Use 5/16" (8mm) extended staples.
Image: A visual guide demonstrating the use of 1/4" (6mm) standard staples for 2-25 sheets and 5/16" (8mm) extended staples for 26-50 sheets.
Instrucțiuni de operare
Standard Stapling
- Place the papers to be stapled under the stapler head, aligning them as desired.
- Press down firmly on the stapler's top cover until the staple penetrates the paper and clinches underneath.
- Release the stapler.
Tacking (Bulletin Board Use)
- Open the stapler 180 degrees by lifting the top cover until it lies flat.
- Position the paper against the surface (e.g., bulletin board) where you wish to tack it.
- Press the stapler down, allowing the staple to penetrate the paper and the surface. The staple will not clinch, allowing for easy removal from the surface.
Using the Ergonomic Staple Remover
- Position the staple remover's metal tip underneath one side of the staple.
- Gently push the remover forward, sliding the tip under the staple.
- Lift the remover upwards to dislodge the staple. The push-style design minimizes paper tearing.
Image: A sequential visual guide illustrating the four steps for effectively using the push-style staple remover to remove staples without damaging paper or corkboards.
Image: Close-up of the ergonomic staple remover, highlighting the finger pad for pressure reduction and the handle pad for comfortable grip.
Întreţinere
- Keep the stapler clean and free of dust and debris. Use a soft, dry cloth for cleaning.
- Nu utilizați agenți de curățare abrazivi sau solvenți.
- Ensure staples are stored in a dry environment to prevent rust.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Staples jam or bend | Incorrect staple size for paper thickness, low-quality staples, or stapler not fully closed. | Ensure correct staple size is used (1/4" for 2-25 sheets, 5/16" for 26-50 sheets). Use Bostitch brand staples. Check that the stapler is fully closed after loading. |
| Staples do not penetrate paper | Paper stack too thick, incorrect staple size, or insufficient force applied. | Reduce paper stack to within 50-sheet capacity. Use 5/16" extended staples for thicker stacks. Apply firm, even pressure. |
| Stapler does not open for reloading | Mechanism stuck or debris. | Apply gentle, firm pressure to lift the top cover. Check for any obstructions in the hinge area. |
Specificații
- Model: B615-BLK-VP
- Marca: Bostitch
- Capacitate de capsare: Până la 50 de coli
- Compatibilitate cu capse: Bostitch B8 PowerCrown 1/4" (6mm) Standard Staples (2-25 sheets), Bostitch B8 PowerCrown 5/16" (8mm) Extended Staples (26-50 sheets)
- Constructie: Metal
- Mod de operare: Manual
- Greutatea articolului: 14.8 uncii
- Dimensiuni: Approximately 5.94" (151mm) L x 1.57" (40mm) W x 3.26" (83mm) H
Image: A diagram showing the key dimensions of the Bostitch Titan stapler and its accompanying staple remover, along with staple sizes, for storage and reference.
Garanție și suport
For warranty information or product support, please refer to the official Bostitch website-ul lor sau contactați departamentul lor de asistență pentru clienți. Păstrați bonul fiscal ca dovadă a achiziției.
Bostitch Official Website: www.bostitch.com
