LEDVANCE 4099854309502

LEDVANCE 17W 2400LM IP65 LED Spotlight with Motion and Light Sensor User Manual

Model: 4099854309502

1. Introducere

Thank you for choosing the LEDVANCE 17W 2400LM IP65 LED Spotlight with Motion and Light Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new LED spotlight. Please read these instructions carefully before installation and retain them for future reference.

2. Informații de siguranță

  • Siguranta electrica: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the power supply is disconnected before installation, maintenance, or repair.
  • Voltage: This product operates on 220 Volts. Verify your power supply matches this requirement.
  • Evaluare IP65: The spotlight is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. It is suitable for outdoor use but should not be submerged in water.
  • Căldură: Do not cover the spotlight during operation, as this may cause overheating.
  • Nereglabil: This LED spotlight is non-dimmable. Do not connect it to a dimmer switch.
  • Sursa de lumina: The LED light source is not replaceable. If the light source fails, the entire luminaire must be replaced.

3. Conținutul pachetului

Vă rugăm să verificați ambalajul pentru a vă asigura că sunt prezente toate componentele:

  • LEDVANCE 17W 2400LM LED Spotlight unit
  • Suport de montare
  • Screws and wall anchors (may vary by region)
  • Manual de instructiuni

4. Configurare și instalare

Urmați acești pași pentru o instalare corectă:

4.1 Preinstalare

  • Oprire: Asigurați-vă că alimentarea principală cu energie electrică a zonei de instalare este oprită de la întrerupătorul de circuit.
  • Selectarea locației: Choose a suitable outdoor location for the spotlight. Consider the desired coverage area for the light and the effective range of the motion and light sensors. Ensure the mounting surface is sturdy enough to support the fixture.
  • Dimensions Check: Refer to the product dimensions to ensure adequate space for installation.
Diagram showing the dimensions of the LEDVANCE LED Spotlight

This diagram illustrates the physical dimensions of the LEDVANCE LED Spotlight. The front view prezintă o lățime de 157 mm, iar lateralul view shows a height of 183 mm and a depth of 56.5 mm, providing crucial measurements for installation planning.

4.2 Montare

  1. Position the mounting bracket on the desired surface and mark the drilling points.
  2. Drill holes at the marked positions and insert wall anchors if necessary.
  3. Fixați suportul de montare pe suprafață folosind șuruburile furnizate.
  4. Attach the LED spotlight unit to the mounting bracket, ensuring it is firmly secured. Adjust the angle of the spotlight as needed.

4.3 Cablare

  • Connect the spotlight's electrical wires to your mains power supply (220V). Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations.
  • Properly insulate all connections to prevent short circuits and ensure safety.
  • Once wiring is complete and secure, restore power to the circuit.
Product packaging for LEDVANCE Floodlight Sensor

This image displays the product packaging for the LEDVANCE Floodlight Sensor, highlighting key features such as 17W power, 2400 lumens, IP65 rating, 5-year guarantee, 4000K color temperature, and motion/light sensor capabilities. It also shows the product's model number and various certifications.

5. Instrucțiuni de utilizare

The LEDVANCE spotlight is designed for automatic operation based on its integrated motion and light sensors.

  • Light Sensor (Dusk-to-Dawn): The integrated light sensor detects ambient light levels. The spotlight will automatically activate when the ambient light falls below a certain threshold (e.g., at dusk) and deactivate when sufficient light is present (e.g., at dawn).
  • Senzor de mișcare: The motion sensor detects movement within its detection range. When motion is detected, the spotlight will illuminate for a set duration. After the motion ceases and the set time expires, the light will turn off, provided the ambient light level is above the threshold set by the light sensor.
  • Ajustari: While specific adjustment controls are not detailed, some models may feature adjustable settings for motion sensitivity, light threshold, and illumination duration. Refer to any labels on the fixture itself for potential adjustment dials.

6. Întreținere

The LEDVANCE spotlight requires minimal maintenance.

  • curatenie: Periodically clean the surface of the spotlight and the sensor lens with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or the sensor.
  • Inspecţie: Regularly inspect the fixture for any signs of damage, loose wiring, or corrosion. Address any issues promptly.
  • Fără piese reparabile de utilizator: There are no user-serviceable parts inside the fixture. Do not attempt to open or repair the unit yourself.

7. Depanare

If you encounter issues with your LEDVANCE spotlight, refer to the following common problems and solutions:

ProblemăCauza posibilaSoluţie
Lumina nu se aprinde.Fără alimentare.
Ambient light too high.
Motion sensor not triggered.
Check circuit breaker and wiring.
Wait for dusk or test in a darker environment.
Ensure motion is within sensor range.
Lumina rămâne aprinsă continuu.Mișcare constantă detectată.
Defecțiune a senzorului de lumină.
Eroare de cablare.
Check for obstructions or continuous movement in sensor's field of view.
Contact support if sensor is faulty.
Verificați conexiunile cablurilor.
Lumina pâlpâie.Alimentare instabilă.
Conexiunea cablajului slab.
Consultați un electrician pentru a verifica stabilitatea alimentării cu energie electrică.
Asigurați-vă că toate conexiunile cablurilor sunt fixate (cu alimentarea întreruptă).
Senzorul de mișcare nu detectează.Senzor obstrucționat.
Unghiul senzorului este incorect.
Temperature too high/low for sensor.
Îndepărtați orice obstrucție de pe lentila senzorului.
Adjust the sensor's angle for optimal coverage.
Ensure operating within specified temperature range.

8. Specificații

MarcaLEDVANCE
Numărul de model4099854309502
Wattage17 wați
Ieșire lumen2400 LM
Temperatura de culoare4000K (alb rece)
Unghiul fasciculului100 de grade
Voltage220 volți
Evaluare IPIP65
MaterialAluminiu
Dimensiuni (L x l x H)15.7 x 3.8 x 18.3 cm
Greutatea articolului576 grame
ReglabilNu
SenzoriSenzor de mișcare, senzor de lumină

9. Garanție și asistență

This LEDVANCE spotlight comes with a 5 an garanție de la data achiziției. Această garanție acoperă defectele de materiale și de fabricație în condiții normale de utilizare.

For warranty claims, technical support, or any questions not covered in this manual, please contact your retailer or the LEDVANCE customer service directly. Keep your proof of purchase for warranty validation.

Documente conexe - 4099854309502

Preview LEDVANCE SL ECO SOLAR E - Specificații ale produsului și ghid de instalare
Detalii complete despre seria LEDVANCE SL ECO SOLAR E, inclusiv specificații tehnice, dimensiuni, date de performanță și instrucțiuni de instalare pentru diverse modele.
Preview SENZOR SOLAR DE INUNDAȚIE LEDVANCE ENDURA 10W: Ghid de instalare, utilizare și siguranță
Ghid complet pentru LEDVANCE ENDURA FLOOD SOLAR SENSOR 10W, care acoperă instalarea, modurile de funcționare, funcțiile telecomenzii, specificațiile tehnice și avertismente importante de siguranță privind manipularea bateriilor.
Preview LEDVANCE Architectural Spotlights: Specifications and Installation Guide
Comprehensive technical specifications, dimensions, and installation instructions for LEDVANCE Architectural Spotlights, including AR SPOT1 and AR SPOT2 series. Features detailed product data, IP/IK ratings, beam angles, and electrical characteristics.
Preview LEDVANCE FLOODLIGHT GEN4: Specificații, instalare și caracteristici
Ghid complet pentru seria LEDVANCE FLOODLIGHT GEN4, care detaliază specificațiile tehnice, instrucțiunile de instalare, fluxurile luminose și conformitatea cu normele de siguranță pentru diverse modele.
Preview Tub LED SubstiTUBE T5 HF (ECG) - Ghid de instalare și compatibilitate
Informații detaliate despre tubul LED LEDVANCE SubstiTUBE T5 HF (ECG), inclusiv cerințele de compatibilitate ECG, parametrii de funcționare, instrucțiunile de instalare și specificațiile tehnice pentru aplicații profesionale de iluminat.
Preview LEDVANCE Floodlight Sensor 20: Installation, Safety, and Disposal Guide
Comprehensive guide for the LEDVANCE Floodlight Sensor 20, covering installation, electrical safety, non-replaceable components, disposal instructions (WEEE), and important warnings for safe use.