Manual de utilizare Dasqua 4710-1205 Set de 7 calibre electronice de adâncime de 0-16 inci

1. Introducere

This manual provides instructions for the proper use and maintenance of the Dasqua 7 Piece 0-16-Inch Electronic Depth Gage Set, model 4710-1205. This electronic depth gage is designed for precise depth measurements in various industrial and scientific applications. It features a digital display for clear readings and is constructed for durability and accuracy.

Image 1.1: The Dasqua 7 Piece 0-16-Inch Electronic Depth Gage Set, showing the main unit and various measurement rods.

2. Conținutul pachetului

Verificați dacă toate componentele sunt prezente în pachet:

• Electronic Depth Gage Unit
• Set of Measurement Rods (7 pieces)
• Cutie de depozitare
• Scrisoare de garanție

Image 2.1: The complete Dasqua Electronic Depth Gage Set, including the main unit, measurement rods, and storage case.

3. Caracteristici cheie

• Rezoluţie: 0.0005-inch / 0.01mm for precise measurements.
• Conformitate standard: Manufactured in accordance with DIN863 standards.
• Ax: Hardened, ground, and lapped for enhanced accuracy.
• Versatilitate: Designed to accommodate a broad range of measurement applications.
• Afişa: Large, digital display for clear and quick readings.
• Constructie: Hardened stainless steel base and rods resist wear, ensuring durability and consistent accuracy.
• Resetare la zero: Ability to reset to zero at any position for comparative depth measurements.

4. Instrucțiuni de configurare

4.1. Instalarea bateriei

The electronic depth gage typically uses a CR2032 lithium coin cell battery. To install or replace the battery:

1. Locate the battery compartment cover on the back of the digital display unit.
2. Folosiți o șurubelniță mică sau o monedă pentru a deschide capacul.
3. Introduceți o nouă baterie CR2032 cu partea pozitivă (+) în sus.
4. Puneți bine capacul compartimentului bateriei.

4.2. Attaching Measurement Rods

Select the appropriate measurement rod for the desired depth range. The set includes rods of various lengths.

1. Identify the threaded end of the measurement rod.
2. Carefully screw the rod into the threaded hole at the bottom of the depth gage's base until it is finger-tight. Do not overtighten.
3. Ensure the rod is securely attached and straight.

Image 4.1: The electronic depth gage with a measurement rod properly attached to its base.

Image 4.2: A selection of the hardened stainless steel measurement rods provided with the depth gage set.

5. Instrucțiuni de utilizare

5.1. Pornire/Oprire

• Apăsați tasta ON/OFF buton pentru a porni dispozitivul.
• Apăsați tasta ON/OFF button again to power off the device.

5.2. Unit Conversion (Inch/Millimeter)

• Apăsați tasta mm/inch button to switch between millimeter (mm) and inch (in) units. The selected unit will be displayed on the screen.

5.3. Setarea la zero

The zero-reset function allows for comparative measurements or setting a reference point.

1. Place the depth gage on a flat, stable reference surface, ensuring the measurement rod is fully retracted or resting on the surface.
2. Apăsați tasta ZERO button. The display will show '0.000' or '0.00'.

5.4. Luarea unei măsurători

1. Ensure the depth gage is zeroed on a reference surface.
2. Place the base of the depth gage firmly on the surface from which the depth is to be measured.
3. Lower the measurement rod into the hole or recess until its tip contacts the bottom.
4. Read the measurement directly from the digital display.

5.5. Funcția Hold

• Apăsați tasta ȚINE button to freeze the current reading on the display.
• Apăsați tasta ȚINE button again to release the reading and return to live measurement.

Imaginea 5.1: Detaliată view of the digital display, showing the ON/OFF, mm/in, HOLD, and ZERO buttons.

6. Întreținere

6.1. Curatenie

• Wipe the depth gage and rods with a clean, dry, lint-free cloth after each use.
• Pentru murdăria persistentă, folosiți o lavetă ușor tamponată.ampened with isopropyl alcohol. Avoid harsh chemicals or solvents.
• Asigurați-vă că nu pătrunde lichid în componentele electronice.

6.2. Depozitare

• Store the depth gage in its protective case when not in use.
• Păstrați dispozitivul într-un mediu uscat, ferit de lumina directă a soarelui, temperaturi extreme și umiditate ridicată.
• Dacă depozitați bateria pentru o perioadă lungă de timp, scoateți-o pentru a preveni scurgerile.

6.3. Înlocuirea bateriei

Replace the battery when the display becomes dim or erratic. Refer to Section 4.1 for battery installation instructions.

7. Depanare

• Afișajul este gol sau slab iluminat:
  Check battery installation. Replace the battery if necessary. Ensure the device is powered on.
• Citiri inexacte:
  Ensure the depth gage is properly zeroed on a flat reference surface. Clean the measurement rod and base to remove any debris. Verify the measurement rod is securely attached.
• Butoanele nu răspund:
  Check battery level. If the issue persists after battery replacement, contact customer support.

8. Specificațiile produsului

Image 8.1: Detailed specifications and dimensional diagram for the Dasqua 0-16 inch Electronic Depth Gage Set.

9. Garanție și asistență

This product is supplied with a warranty letter. For specific warranty terms and conditions, please refer to the documentation included in your package. For technical support, service, or inquiries regarding your Dasqua 4710-1205 Electronic Depth Gage Set, please contact the manufacturer directly through their official website-ul sau canalele de servicii pentru clienți.