Introducere
Welcome to your new Hello Kitty Sunrise Alarm Clock. This manual provides comprehensive instructions for the safe setup, efficient operation, and proper maintenance of your device. Please read this manual thoroughly before using the alarm clock to ensure optimal performance and longevity.
Informații importante privind siguranța
- Read all instructions carefully before initial use.
- Țineți dispozitivul departe de apă și de medii cu umiditate ridicată.
- Use only the provided USB cable and a compatible USB power adapter (not included) with appropriate voltage.
- Nu încercați să dezasamblați, să modificați sau să reparați dispozitivul singur. Apelați la personal calificat pentru toate lucrările de service.
- Avoid placing the clock in direct sunlight or near heat sources.
Conținutul pachetului
- Hello Kitty Sunrise Alarm Clock (Kuromi design)
- Cablu de alimentare USB
- Manual de utilizare
Produs terminatview
Faţă View
Figura 1: Față view of the Hello Kitty Sunrise Alarm Clock with Kuromi character and LED display.
Figure 2: Hello Kitty Sunrise Alarm Clock in a bedroom setting, demonstrating its light output.
Controale din panoul din spate
The back panel of the alarm clock contains several buttons for configuration and control. These typically include buttons for setting time, alarm, adjusting light modes, and other functions. Refer to the labels on your specific device for precise button identification and functionality.
Înființat
1. Conexiune la alimentare
Connect the small end of the provided USB power cable into the USB port located on the back of the alarm clock. Plug the larger end of the USB cable into a compatible USB power adapter (not included) or a powered USB port on another device. Ensure the power source is stable.
2. Pornirea inițială
Once connected to power, the LED display will illuminate. The clock may display a default time (e.g., 12:00 AM) or require immediate time setting. Proceed to the Operating Instructions section to set the correct time and other preferences.
Instrucțiuni de operare
Setarea orei
- Țineți apăsat butonul SET button (or a button labeled with a clock icon) on the back panel until the hour digits on the display begin to flash.
- Utilizați UP şi JOS buttons (or '+' and '-' buttons) to adjust the hour.
- Apăsați tasta SET button again to move to the minute adjustment. Use the UP şi JOS butoane pentru reglarea minutelor.
- Apăsați tasta SET button one more time to confirm the time and exit the time setting mode.
Setarea alarmei
- Țineți apăsat butonul ALARMA button (or a button labeled with an alarm icon) until the alarm hour digits on the display begin to flash.
- Utilizați UP şi JOS butoane pentru a seta ora dorită a alarmei.
- Apăsați tasta ALARMA button again to move to the minute adjustment. Use the UP şi JOS buttons to set the desired minutes.
- Apăsați tasta ALARMA button to confirm the alarm time. Depending on the model, you may then be prompted to select an alarm sound or light intensity.
- Pentru a activa sau dezactiva alarma, apăsați scurt butonul ALARMA button. An alarm icon will appear on the display when the alarm is active and disappear when it is deactivated.
Simulare de răsărit
The clock features a sunrise simulation function designed to gently wake you up. When an alarm is set and activated, the clock's light will gradually increase in brightness over a period (typically 10-30 minutes) before your set alarm time, mimicking a natural sunrise. This feature helps promote a more natural waking experience.
Lumini multicolore
To cycle through the various light colors and modes, press the APRINDE button (or a button labeled with a light bulb icon) on the back panel. Continue pressing the button to select your preferred color or light mode. Some models may offer a dedicated button for color selection or brightness adjustment.
Funcția de amânare
When the alarm sounds, press the large button located on the top or front of the clock (often labeled PUI DE SOMN) to temporarily silence the alarm. The alarm will sound again after a preset interval, typically 9 minutes.
Display LED
The bright LED display shows the current time, date, and room temperature. The brightness of the display can often be adjusted to your preference using a dedicated button or by holding down the APRINDE buton.
Port de încărcare USB
The integrated USB port on the back of the clock allows you to charge compatible smart devices. Connect your device's charging cable to this port. Ensure the alarm clock is properly powered on for the charging function to operate.
Întreţinere
Curatenie
To clean the alarm clock, first unplug it from the power source. Gently wipe the exterior with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface of the device.
Depozitare
When not in use for extended periods, store the clock in a cool, dry place, away from direct sunlight and extreme temperatures. Protect it from dust and moisture.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Ceasul nu pornește. | USB cable not properly connected or power adapter faulty. | Ensure the USB cable is securely connected to both the clock and a working USB power adapter/port. Try a different USB port or adapter. |
| Butoanele nu răspund. | Eroare temporară de software sau problemă cu butonul fizic. | Unplug the clock, wait 10 seconds, then plug it back in to perform a soft reset. If issues persist, contact customer support. |
| Alarma nu sună. | Alarma nu este activată sau este setată incorect. | Verify that the alarm is set and activated (check for the alarm icon on the display). Ensure the alarm volume is not muted if applicable. |
| Time is inaccurate or drifts. | Power interruption or internal clock drift. | Reset the time as per the "Setting the Time" instructions. Ensure a stable power supply to prevent interruptions. |
| Portul de încărcare USB nu funcționează. | Clock not powered or device cable issue. | Ensure the alarm clock is powered on. Try a different charging cable for your smart device to rule out cable issues. |
Specificații
- Marca: Bună Kitty
- Număr de model: HKCLK01KUR-MFN
- Tip de afișare: LED digital
- Sursa de alimentare: Electric cu fir (USB)
- Caracteristici speciale: Adjustable Brightness, Alarm, Charging Port, LED Display, Temperature Display, Sunrise Simulation, Multicolor Lights
- Dimensiuni produs: 17.8L x 15.2Î centimetri
- Greutate: 399 g
- Material: Plastic
- Conectivitate: USB
- UPC: 680079025816
Informații despre garanție
Specific warranty details for the Hello Kitty Sunrise Alarm Clock are not included in this user manual. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card provided with your original purchase or contact the retailer where you purchased this product. You may also visit the official Hello Kitty brand website-ul pentru mai multe detalii.
Asistență pentru clienți
Should you require further assistance, technical support, or have questions not covered in this manual, please contact the retailer from whom you purchased the Hello Kitty Sunrise Alarm Clock. Alternatively, you may visit the official Hello Kitty brand website pentru informații de contact ale serviciului clienți.
