Manual de instrucțiuni pentru aparatul de gheață comercial ADT HZB-45YY

1. Introducere

Thank you for choosing the ADT HZB-45YY Commercial Ice Maker. This manual provides essential information for the safe operation, installation, maintenance, and troubleshooting of your new ice machine. Please read this manual thoroughly before operating the appliance and retain it for future reference.

Descrierea imaginii: Un front view of the ADT HZB-45YY Commercial Ice Maker, featuring a stainless steel finish and a black top. An overlay highlights the unique crescent-shaped ice cubes produced by the machine.

2. Informații de siguranță

To prevent injury to users or damage to the appliance, observe all safety precautions. This appliance is intended for commercial use. Always ensure proper grounding and ventilation.

• Nu utilizați mașina cu un cablu de alimentare sau un ștecher deteriorat.
• Asigurați-vă că mașina este așezată pe o suprafață stabilă și plană.
• Păstrați orificiile de ventilație fără obstacole.
• Nu depozitați substanțe explozive, cum ar fi cutii de aerosoli cu un propulsor inflamabil, în acest aparat.
• Deconectați de la alimentarea cu energie electrică înainte de curățare sau service.

3. Conținutul pachetului

Verificați dacă toate articolele sunt prezente în ambalaj:

• ADT HZB-45YY Commercial Ice Maker Unit
• Scoop de gheață
• In-Line Water Hose
• Furtun de scurgere
• Gallon-Bottled Water Hose
• Manual de instrucțiuni (acest document)

Descrierea imaginii: This image displays the ADT HZB-45YY ice maker with its approximate dimensions (17.6 inches width, 15.7 inches depth, 31.4 inches height). Below the unit, the included accessories are shown: an ice scoop, an in-line water hose, a drain hose, and a hose for gallon-bottled water connection.

4. Produs terminatview și Caracteristici

The ADT HZB-45YY is a high-efficiency commercial ice maker designed for reliable ice production. Key features include:

• Crescent-Shaped Ice Cubes: Unique design for slow-melting ice, ideal for beverages.
• Capacitate zilnică mare: Produce până la 55 kg de gheață pe zi.
• Producție rapidă de gheață: Each ice-making cycle takes approximately 13-20 minutes.
• Efficient Evaporator: Features a 4x8 two-sided evaporator for consistent performance.
• Construcție durabilă: Sleek stainless steel design, rust-resistant and built for longevity.
• Panou de control digital: Intuitive LCD panel for easy operation and settings adjustment.
• Funcția de autocurățare: Simplifies maintenance.
• Time Reservation: Allows setting ice production time in advance.

Descrierea imaginii: A banner highlighting eight core technologies of the ADT ice maker, represented by icons and text: Stainless Steel Body, Powerful Compressor, Energy Saving, Blue Light, Digital Control, Foamed Insulation, Self Cleaning, and Time Reservation.

Descrierea imaginii: This image illustrates the different thicknesses of crescent-shaped ice cubes the machine can produce, along with their approximate production times: Thin Ice Cube (5-9 minutes), Medium Ice Cube (9-15 minutes), and Thick Ice Cube (15-25 minutes).

5. Configurare și instalare

Instalarea corectă este crucială pentru performanță și siguranță optime.

5.1 Despachetarea

1. Scoateți cu grijă aparatul de gheață din ambalaj.
2. Îndepărtați toate materialele de ambalare, banda adezivă și folia de protecție.
3. Inspect the unit for any shipping damage. Contact your retailer immediately if damage is found.

5.2 Plasarea

• Așezați aparatul de gheață pe o suprafață fermă și plană, capabilă să-i susțină greutatea atunci când este plin cu gheață și apă.
• Ensure adequate ventilation around the unit. Maintain at least 5 inches (12.7 cm) of space from walls and other appliances.
• Evitați lumina directă a soarelui sau sursele de căldură.
• Temperatura ambientală trebuie să fie între 10°C și 32°C.

5.3 Conexiune la apă

The ADT HZB-45YY offers two methods for water supply:

1. In-Line Water Supply: Connect the provided in-line hose to a potable water source with appropriate pressure. Ensure all connections are secure to prevent leaks.
2. Gallon-Bottled Water Supply: Use the provided hose to connect to a standard gallon-bottled water dispenser.

Ensure the drain hose is properly connected and directed to a suitable drain to prevent water overflow.

Descrierea imaginii: This image demonstrates the two water input options for the ice maker. On the right, an 'In-line' connection shows a hose leading to a faucet. On the left, a 'Gallon-bottled water' connection shows a hose leading to a large water bottle.

Descrierea imaginii: Un detaliat view of the ice maker's back panel, highlighting the connection points for easy installation. Labels indicate the 'Water outlet', 'Power line', 'In-line' water intake, and 'Gallon-bottled water' intake.

5.4 Conexiune electrică

• Asigurați-vă că priza de curent corespunde volumuluitage requirements of the ice maker (115 Volts).
• Conectați cablul de alimentare la o priză electrică cu împământare. Nu utilizați prelungitoare sau adaptoare.

6. Instrucțiuni de utilizare

Familiarize yourself with the control panel and basic operations.

6.1 Panoul de control pesteview

Descrierea imaginii: A detailed close-up of the ice maker's LCD control panel. The panel displays temperature and ice-making status. Buttons are labeled with their functions: 'LIGHT' (turns on blue light), 'TIMER' (for reservation time setting), 'CLEAN' (press for 5 seconds for self-cleaning), 'ON/OFF' (power button), and '+/-' (adjusts ice making process and time).

• APRINDE: Activates the internal blue light.
• TIMER: Press to enter the reservation time setting for delayed ice production.
• CURAT: Press and hold for 5 seconds to initiate the self-cleaning function.
• ON/OFF: Pornește sau oprește unitatea.
• , Used to adjust ice making duration or set timer values.

6.2 Pornirea inițială

1. După conectarea apei și a energiei electrice, apăsați butonul ON/OFF butonul pentru a porni mașina.
2. The machine will begin its first ice-making cycle. The first few batches of ice may be smaller or irregular; discard them.

6.3 Producția de gheață

• The machine produces up to 64 pieces of ice per cycle.
• Cycle duration is typically 13-20 minutes, depending on ambient temperature and water temperature.
• Utilizați +/- buttons to adjust the ice-making time, which influences the thickness of the ice cubes. Longer times result in thicker ice.

Descrierea imaginii: Un prim plan view of the ADT ice maker's front panel, highlighting its performance metrics. Text overlays indicate a '120lbs Daily Capacity' and '64 pcs ice per cycle, 13-20 mins one time'.

6.4 Ice Making Reservation

To set a delayed start time for ice production:

1. With the machine in standby mode, press the TIMER buton.
2. Utilizați +/- butoanele pentru a seta timpul de întârziere dorit (în ore).
3. Presa TIMER again to confirm. The machine will start automatically after the set time.

Descrierea imaginii: The ADT ice maker is shown in a modern room setting, positioned near a window and a plant. Text on the image highlights the 'ICE MAKING RESERVATION' feature, explaining that users can 'Set the ice making time in advance to save waiting time'.

7. Întreținere

Regular cleaning and maintenance ensure the longevity and hygiene of your ice maker.

7.1 Funcția de autocurățare

The machine is equipped with a self-cleaning feature:

1. Ensure the machine is connected to a water supply and drain.
2. Țineți apăsat butonul CURAT butonul pentru 5 secunde.
3. The machine will automatically run a cleaning cycle.
4. Once complete, drain any remaining water.

7.2 Curăţare manuală

• Exterior: Wipe the exterior with a soft cloth and mild detergent. Do not use abrasive cleaners.
• Interior: For thorough cleaning, disconnect power. Remove any remaining ice. Clean the ice storage bin and water reservoir with a solution of water and white vinegar or a food-grade ice maker cleaner. Rinse thoroughly with clean water.
• Vaporizator: Periodically inspect the evaporator plates for mineral buildup. Clean gently with a soft brush if necessary.
• filtru de aer: The air filter (if present, typically on the front or side grille) should be cleaned monthly. Remove and wash with warm, soapy water, then dry completely before reinstalling.

Descrierea imaginii: Un prim plan view of the ice maker's internal evaporator plates, which are responsible for forming the ice cubes.

8. Depanare

Consultați această secțiune pentru probleme frecvente și soluțiile aferente.

If the problem persists after attempting these solutions, please contact ADT customer support.

9. Specificații

10. Garanție și asistență

ADT provides a one-year warranty for this product from the date of purchase. This warranty covers manufacturing defects under normal use. Additionally, a 30-day return policy is offered.

For warranty claims, technical support, or any inquiries, please contact ADT customer service through the retailer where the product was purchased or visit the official ADT website-ul.