1. Introducere
The KAIWEETS Brake Fluid Tester Pen (Model KVBF01) is a high-precision instrument designed to quickly and accurately measure the moisture content in various types of brake fluid, including DOT3, DOT4, and DOT5.1. This device helps ensure optimal brake performance and safety by indicating when brake fluid replacement is necessary. Its durable, corrosion-resistant probe and user-friendly features like a data hold function, three-color backlight, and buzzer alarm make it an essential tool for both professional mechanics and DIY enthusiasts.
2. Informații de siguranță
Please read and understand all safety warnings and operating instructions before using the KAIWEETS Brake Fluid Tester Pen. Failure to do so may result in injury or damage to the device.
- Țineți aparatul departe de copii.
- Nu expuneți dispozitivul la temperaturi extreme, la lumina directă a soarelui sau la umiditate ridicată.
- Evitați scăderea sau supunerea dispozitivului la impacturi puternice.
- Nu încercați să dezasamblați sau să modificați dispozitivul. Apelați la personal calificat pentru orice intervenție de service.
- Ensure the probe is clean and dry before and after each use to prevent contamination and ensure accurate readings.
- Brake fluid is corrosive. Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water and seek medical attention if irritation persists.
- Dispose of used batteries and brake fluid according to local regulations.
3. Conținutul pachetului
Verificați dacă toate articolele sunt prezente în colet:
- 1 x KAIWEETS Brake Fluid Tester Pen (KVBF01)
- 2 x baterii AAA
4. Produs terminatview și Caracteristici
The KAIWEETS Brake Fluid Tester Pen is designed for ease of use and accurate measurement. Below are its main components and key features.
Figure 4.1: KAIWEETS Brake Fluid Tester Pen and included AAA batteries.
4.1 componente cheie
- Corrosion-Resistant Probe: Located at the bottom, this durable probe is designed for long-lasting performance and accurate readings even with frequent use.
- Display LCD: Shows measurement results, battery status, and fluid type (DOT3, DOT4, DOT5.1).
- Buton de alimentare: Used to turn the device ON/OFF.
- "S" Button (Select/Hold): Used to select fluid type and activate the data hold function.
4.2 Caracteristici cheie
Figure 4.2: The KAIWEETS tester features a corrosion-resistant probe for enhanced durability and extended use.
Durable and Corrosion-Resistant Probe: The tester is equipped with a robust probe designed to withstand corrosive brake fluid, ensuring long-term reliability and consistent performance.
Figure 4.3: The data hold function allows for easy review of readings.
Funcția de păstrare a datelor: This feature allows you to freeze the current measurement on the display, making it easier to record or review readings without needing to keep the probe in the fluid.
Figure 4.4: The three-color backlight provides clear visual indications of moisture content.
Iluminare de fundal în trei culori: The LCD display changes color to provide a quick visual indication of the brake fluid's condition:
- Verde: 0% - 2% moisture content. Brake fluid is in good condition.
- Galben: 2% - 3% moisture content. Brake fluid is approaching critical levels; replacement is recommended soon.
- Roşu: Greater than 3% moisture content. Brake fluid is saturated with moisture and requires immediate replacement.
Figure 4.5: The buzzer alarm provides an audible warning for high moisture levels.
Alarma sonor: An audible alarm will sound when the moisture level exceeds 3%, providing an immediate warning that the brake fluid needs to be changed.
Figure 4.6: The tester is compatible with DOT3, DOT4, and DOT5.1 brake fluids.
Extensive Testing Coverage: The tester is calibrated to accurately measure moisture content in DOT3, DOT4, and DOT5.1 brake fluids, making it versatile for various vehicle types.
Precizie ridicată: Provides precise readings with an accuracy of ±0.3% within a range of 0% - 4% moisture content.
Oprire automată: The device features an automatic shutdown function to conserve battery life when not in use.
Indicație baterie descărcată: The display will show a low battery icon when the batteries need to be replaced.
5. Configurare
5.1 Instalarea bateriei
The KAIWEETS Brake Fluid Tester Pen requires 2 AAA batteries (included). Follow these steps to install them:
- Locate the battery compartment cover at the top end of the tester.
- Twist or slide the cover to open the compartment.
- Introduceți cele 2 baterii AAA, asigurându-vă de polaritatea corectă (+/-) așa cum este indicată în interiorul compartimentului.
- Puneți bine capacul compartimentului bateriei.
Dispozitivul este acum gata de utilizare.
6. Instrucțiuni de utilizare
Follow these steps to accurately test your brake fluid:
- Pregătiți testerul: Asigurați-vă că sonda este curată și uscată înainte de utilizare.
- Pornire: Apăsați butonul de pornire (⏻) to turn on the tester. The display will light up.
- Select Fluid Type: Press the "S" button to cycle through DOT3, DOT4, and DOT5.1 brake fluid types. Select the type corresponding to your vehicle's brake fluid.
- Sondă de imersie: Carefully immerse the probe into the brake fluid reservoir. Ensure the probe tips are fully submerged in the fluid.
- Citire măsurătoare: The tester will automatically display the moisture content percentage. Observe the percentage reading and the backlight color:
- Lumină verde: 0% - 2% moisture. Brake fluid is normal.
- Lumină galbenă: 2% - 3% moisture. Brake fluid needs attention soon.
- Lumină roșie: Greater than 3% moisture. Brake fluid needs immediate replacement. The buzzer will also sound.
- Use Data Hold (Optional): While the probe is immersed, press and hold the "S" button to activate the data hold function. The reading will be frozen on the display. Press "S" again to release.
- Scoateți și curățați: Carefully remove the probe from the brake fluid. Wipe the probe clean with a soft, dry cloth immediately after use to prevent corrosion and ensure longevity.
- Oprire: Apăsați și mențineți apăsat butonul de pornire (⏻) to turn off the tester. The device will also automatically shut down after a period of inactivity.
Figure 6.1: Interpretation of the three-color backlight and buzzer alarm.
7. Întreținere
Proper maintenance will extend the life of your KAIWEETS Brake Fluid Tester Pen.
- curatenie: Always clean the probe thoroughly with a dry, lint-free cloth immediately after each use. Do not use water or cleaning solvents on the probe or device body.
- Depozitare: Store the tester in a cool, dry place, away from direct sunlight and corrosive materials.
- Înlocuire baterie: Replace batteries when the low battery indicator appears on the display to ensure accurate readings and proper operation.
8. Depanare
If you encounter issues with your KAIWEETS Brake Fluid Tester Pen, refer to the following table:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Dispozitivul nu pornește. |
|
|
| Citiri inexacte. |
|
|
| Buzzer alarm sounds constantly. |
|
|
9. Specificații
| Parametru | Valoare |
|---|---|
| Numărul de model | KVBF01 |
| Dimensiunile produsului | 9.92 x 2.56 x 1.57 inci |
| Greutatea articolului | 4.16 uncii |
| Sursa de alimentare | 2 baterii AAA de 1.5 V (incluse) |
| Precizia măsurătorilor | ±0.3% |
| Interval de măsurare | 0% - 4% moisture content |
| Temperatura de operare | 0-40°C (32-104°F) |
| Compatible Fluid Types | DOT3, DOT4, DOT5.1 |
| Material | Polipropilenă |
10. Garanție și asistență pentru clienți
KAIWEETS is committed to providing high-quality products and excellent customer service.
- Garantie: Acest produs vine cu o garanție de 3 ani de la data achiziției.
- Returnări: Beneficiați de o politică de returnare gratuită de 30 de zile.
- Suport tehnic: KAIWEETS provides lifetime technical support for this product.
- Contactaţi-ne: If you have any questions, concerns, or require technical assistance, please do not hesitate to contact KAIWEETS customer service. For more information, visit the official KAIWEETS store on Amazon: KAIWEETS Store.
