1. Introducere
The ELKO EP RFSAI-62B-SL/MT is a state-of-the-art switching actuator designed for smart home environments. This unit features two output relays, making it suitable for controlling various consumer appliances and lighting systems. It integrates seamlessly into Matter-compatible ecosystems through the Thread protocol, ensuring broad interoperability with other Matter-certified devices.
Beyond traditional switches and buttons, the RFSAI-62B-SL/MT can also be controlled using wireless wall switches like the RFGB-40-MT. Its robust design allows for a range of up to 200 meters in open air, providing flexible installation options. The device supports a maximum switching capacity of 2000 W (8 A) and utilizes an AgSnO2 + Zero Cross relay contact, optimized for switching lighting loads efficiently.
2. Informații de siguranță
Please read this manual carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Instalarea trebuie efectuată de către un electrician calificat, în conformitate cu toate codurile electrice locale și naționale.
- Disconnect power at the circuit breaker before installing or servicing the device.
- Nu expuneți dispozitivul la umiditate, temperaturi extreme sau lumină directă a soarelui.
- Asigurați-vă că dispozitivul este utilizat în limita volumului specificattage and current ratings (AC 230 V, 8 A).
- Nu încercați să reparați sau să modificați dispozitivul. Apelați la personal calificat pentru toate lucrările de service.
3. Conținutul pachetului
Verificați dacă toate articolele sunt prezente în colet:
- 1x ELKO EP RFSAI-62B-SL/MT Matter Switching Actuator
- 1x Manual de utilizare (acest document)
4. Produs terminatview
The RFSAI-62B-SL/MT is a compact unit designed for flush mounting. Below is an image of the device with key components highlighted.
Figure 4.1: ELKO EP RFSAI-62B-SL/MT Matter Switching Actuator.
This image shows the ELKO EP RFSAI-62B-SL/MT Matter Switching Actuator. The device is white with black screwless terminals at the bottom. The top surface features the 'iNELS' logo, 'Switch unit', 'RFSAI-62B-SL/MT', and the 'matter' logo. There are labels for 'LED' and 'PROG' indicating an LED indicator and a program button. Wiring diagrams are printed above the terminals, labeled S1, S2, N, L, V2, and V1.
Componente cheie:
- Indicator LED: Oferă feedback privind starea.
- PROG (Program/RESET) Button: Used for pairing, resetting, and other programming functions.
- Screwless Terminals: For secure and easy wiring connections.
- S1, S2: Input terminals for external switches/buttons.
- N: Neutral wire connection.
- L: Live wire connection (AC 230V).
- V1, V2: Output terminals for controlled loads (e.g., lighting, appliances).
5. Configurare și instalare
Before proceeding with installation, ensure power is disconnected at the main circuit breaker.
5.1 Instrucțiuni de cablare
- Deconectare de la curent: Turn off the main power supply to the circuit where the actuator will be installed. Verify with a voltage tester.
- Conectare alimentare:
- Conectați Live (L) wire (AC 230V) to the 'L' terminal on the actuator.
- Conectați neutru (N) wire to the 'N' terminal on the actuator.
- Conectați sarcinile:
- Connect the load (e.g., light fixture) to the V1 și/sau V2 terminals. Ensure the neutral wire of the load is connected to the main neutral line.
- Connect External Switches (Optional):
- If using external push-buttons or switches, connect them to the S1 şi S2 terminals. These inputs can be configured for various control modes.
- Instalare sigură: Place the actuator securely within a suitable electrical box or enclosure.
- Restabiliți puterea: După ce toate conexiunile sunt sigure și verificate, restabiliți alimentarea cu energie la întrerupătorul de circuit.
5.2 Matter Network Integration
To integrate the RFSAI-62B-SL/MT into your smart home system, you will need:
- One or more Thread Border Routers connected to your Wi-Fi network.
- A Matter-compatible hub (e.g., Home Assistant, Apple HomeKit, Google Home, Amazon Alexa).
- The associated mobile application for your chosen Matter hub.
Follow the pairing instructions provided by your Matter hub's application. Typically, this involves putting the device into pairing mode (often by pressing the PROG/RESET button for a specified duration) and scanning a QR code or entering a pairing code provided with the device.
6. Instrucțiuni de utilizare
Once successfully integrated into your Matter network, the RFSAI-62B-SL/MT can be controlled in several ways:
- Via Matter Hub Application: Use your preferred Matter controller application (e.g., Home Assistant, Apple Home, Google Home) to remotely switch the connected loads ON or OFF.
- Via External Switches: If wired, the S1 and S2 inputs allow control via traditional wall switches or push-buttons. The functionality of these inputs can be configured within your Matter ecosystem.
- Via Wireless Wall Switches: Compatible wireless wall switches, such as the ELKO EP RFGB-40-MT, can be paired with the actuator for convenient local control without additional wiring.
- PROG/RESET Button: While primarily for pairing and resetting, the PROG button may also offer basic toggle functionality depending on the specific firmware and Matter configuration.
7. Întreținere
The ELKO EP RFSAI-62B-SL/MT is designed for maintenance-free operation. However, consider the following:
- curatenie: If necessary, gently wipe the device with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Actualizări firmware: Periodically check your Matter hub's application for available firmware updates for the actuator to ensure optimal performance and security.
- Conditii de mediu: Ensure the device remains within its specified operating environment (temperature, humidity) to prevent damage.
8. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Dispozitivul nu răspunde. | No power; Not paired; Out of Thread network range. | Check power supply; Re-pair the device; Ensure it's within range of a Thread Border Router. |
| Cannot connect to Matter network. | Incorrect pairing procedure; Matter hub issue; Thread Border Router issue. | Refer to your Matter hub's pairing guide; Restart Matter hub and Thread Border Router; Try factory resetting the actuator (long press PROG/RESET button). |
| Connected load does not switch. | Incorrect wiring; Overload; Faulty load. | Verify wiring connections; Check load's power consumption against actuator's max rating (2000W/8A); Test the load independently. |
| External switch (S1/S2) not working. | Incorrect wiring; Switch type not compatible; Configuration issue in Matter app. | Check wiring to S1/S2; Ensure switch is compatible (e.g., momentary push-button vs. toggle); Verify input configuration in your Matter hub. |
9. Specificații
| Caracteristică | Detaliu |
|---|---|
| Dimensiuni produs (L x l x H) | 4.3 x 4.4 x 2.2 cm (1.69 x 1.73 x 0.87 țoli) |
| Producător | ELKO EP |
| Numărul de model | 8975 (Internal), RFSAI-62B-SL/MT (Product) |
| Mod de operare | Electric |
| Evaluare curentă | 8 A (Max. 2000 W) |
| Vol. De operaretage | 230 volți (AC) |
| Tip de contact | Normally Closed (AgSnO2 + Zero Cross relay) |
| Tip conector | Spălați montura |
| Tip comutator | Dimmer (Note: Product description indicates a switching unit, not a dimmer) |
| Tip terminal | Wago (Screwless terminals) |
| Material | Plastic |
| Protocolul de comunicare | Matter (Application Protocol), Thread (Communication Protocol) |
| Numărul de comutatoare | 2 (8 A/AC1) |
| Gamă | Up to 200 m (open air) |
10. Garanție și asistență
ELKO EP products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the official ELKO EP website-ul sau contactați distribuitorul local.
Pentru asistență suplimentară, vă rugăm să vizitați: www.elkoep.com
