1. Produs terminatview

The YESWELDER ARC-125D PRO is a compact and portable mini inverter welding machine designed for both MMA (Manual Metal Arc, also known as Stick welding) and Lift TIG (Tungsten Inert Gas) welding processes. It features an intelligent LED display for clear visibility of welding parameters and incorporates advanced technologies such as Hot Start, Arc Force, Anti-Stick, and VRD (Voltage Reduction Device) for enhanced performance and safety.

Image 1.1: The YESWELDER ARC-125D PRO Mini Inverter Welder shown with its included ground clamp and electrode holder.

Caracteristici cheie:

• 2-in-1 Welding Modes: Supports both MMA (Stick) and Lift TIG welding for versatile applications.
• Afișaj LED mare: Provides clear and easy-to-read information on current, electrode size, function mode, and welding mode.
• Advanced Welding Functions: Equipped with Hot Start, Arc Force, Anti-Stick, and VRD for improved arc ignition, stability, and safety.
• Design portabil: Compact dimensions (23.6 x 9.4 x 13 cm) and lightweight (approximately 2 kg) for easy transport and storage.
• Protecții de siguranță: Includes automatic compensation for voltage fluctuations, overcurrent protection, overload protection, and temperature control.

2. Informații de siguranță

Welding operations involve significant risks. Always prioritize safety to prevent injury or damage. Read and understand all safety warnings and instructions before operating this equipment.

Măsuri generale de siguranță:

• Echipament individual de protecție (EIP): Always wear appropriate PPE, including a welding helmet with proper shade, flame-resistant clothing, welding gloves, and safety shoes.
• Ventilare: Ensure adequate ventilation to remove welding fumes and gases, which can be hazardous to health.
• Prevenirea incendiilor: Keep a fire extinguisher nearby. Remove all flammable materials from the welding area. Be aware of sparks and hot slag.
• Siguranta electrica: Asigurați-vă că aparatul de sudură este împământat corespunzător. Nu îl utilizați în condiții de umiditate. Verificați cablurile și conexiunile pentru a depista eventualele deteriorări înainte de fiecare utilizare.
• Protecția ochilor și a pielii: Welding arc rays can cause severe burns to eyes and skin. Never look at the welding arc without proper eye protection.
• Zona de lucru: Keep the work area clean, dry, and free of clutter. Ensure stable footing.
• Copii și martori: Țineți copiii și personalul neautorizat departe de zona de sudură.

VRD (voltage Reduction Device) function is designed to reduce the open-circuit voltage to a safe level when the machine is not actively welding, minimizing the risk of electric shock. Always ensure this feature is active unless specific welding conditions require its deactivation (refer to operating instructions).

3. Componente și comenzi

Familiarize yourself with the components and control panel of your YESWELDER ARC-125D PRO welding machine.

Componente incluse:

• YESWELDER ARC-125D PRO Mini Inverter Welder
• Pământ Clamp cu cablu
• Electrode Holder with Cable
• Manual de utilizare

Panoul de control Introducere:

Imaginea 3.1: Față și spate view of the ARC-125D PRO, highlighting control panel elements and connections.

1. Parameter Button (PARAM): Used to cycle through adjustable parameters such as Hot Start and Arc Force.
2. Welding Mode Button (MODE): Toggles between MMA (Stick) and Lift TIG welding modes.
3. VRD Button (VRD ON/OFF): Activates or deactivates the Voltage Reduction Device.
4. Ecran digital: Shows current settings, selected mode, and other operational information.
5. Buton de valoare: Adjusts the welding current or other selected parameters.
6. Terminal de ieșire pozitiv (+): Connects to the electrode holder for MMA or TIG torch for Lift TIG.
7. Terminal de ieșire negativ (-): Connects to the ground clamp.
8. Input Power Cable: Connects the machine to the 230V AC power supply.
9. Întrerupător: Turns the welding machine ON or OFF.
10. Ventilator: Provides cooling for the internal components during operation.

4. Configurare

Proper setup is crucial for safe and effective welding. Follow these steps before beginning any welding task.

4.1 Conexiune la alimentare:

• Asigurați-vă că întrerupătorul de alimentare al aparatului de sudură este în poziția OPRIT.
• Connect the input power cable to a grounded 230V AC power outlet. Verify that the power supply meets the machine's requirements.

4.2 Connecting Welding Cables:

1. Pământ Clamp: Conectați masa clamp cable to the Negative Output Terminal (-) on the front panel. Securely attach the ground clamp to the workpiece or a clean, bare metal part of the welding table, ensuring good electrical contact.
2. Suport electrod (pentru MMA): Connect the electrode holder cable to the Positive Output Terminal (+) on the front panel.
3. TIG Torch (for Lift TIG): For Lift TIG welding, connect your TIG torch (not included) to the Positive Output Terminal (+). Ensure the TIG torch has a gas valve for manual gas control.

Always ensure all connections are tight and secure before powering on the machine.

5. Instrucțiuni de utilizare

This section details the operation of the YESWELDER ARC-125D PRO for both MMA and Lift TIG welding modes.

5.1 MMA (Stick) Welding:

1. Pornire: Turn on the welding machine using the Power Switch. The LED display will illuminate.
2. Select MMA Mode: Press the MODE button until "Stick" or "MMA" is indicated on the digital display.
3. Introduceți electrodul: Securely insert the appropriate electrode (e.g., E6011, E6013, E6010, E7018 up to 3.18mm) into the electrode holder.
4. Ajustați curentul: Use the Value Knob to set the desired welding current (Amperage) based on the electrode type and material thickness.
5. Ajustați parametrii (opțional): Press the PARAM button to cycle through Hot Start and Arc Force settings. Use the Value Knob to adjust these values as needed for optimal arc ignition and stability.
6. VRD Function: Ensure the VRD is ON for maximum safety, especially in damp environments or when working at height.
7. Începeți sudarea: Strike the arc by lightly touching the electrode to the workpiece and quickly lifting it slightly to establish the arc. Maintain a consistent arc length and travel speed.

Imaginea 5.1: Example of Stick welding in progress.

5.2 Sudare TIG cu electrod de ridicare:

For Lift TIG welding, a TIG torch with a gas valve and a separate gas cylinder (Argon) are required (not included).

1. Pornire: Porniți aparatul de sudură.
2. Select Lift TIG Mode: Press the MODE button until "Lift TIG" is indicated on the digital display.
3. Connect TIG Torch: Ensure your TIG torch is connected to the Positive Output Terminal (+) and the gas hose is connected to your Argon gas cylinder.
4. Prepare Tungsten Electrode: Install a sharpened tungsten electrode into the TIG torch.
5. Ajustați curentul: Use the Value Knob to set the desired welding current.
6. Deschideți robinetul de gaz: Open the gas valve on the TIG torch to establish gas flow.
7. Initiate Arc (Lift Arc): Gently touch the tungsten electrode to the workpiece. A small current will flow. Slowly lift the torch to establish the arc. The machine will automatically increase the current to the set value.
8. Perform Welding: Maintain a consistent arc length and feed filler rod manually if required.
9. Terminate Arc: To stop welding, simply lift the torch away from the workpiece. Close the gas valve on the TIG torch after welding.

Imaginea 5.2: Example of Lift TIG welding in progress.

6. Întreținere

Întreținerea regulată asigură longevitatea și funcționarea în siguranță a aparatului dumneavoastră de sudură.

Sfaturi generale de întreținere:

• curatenie: Periodically clean the machine's exterior with a dry, soft cloth. Use compressed air to blow out dust and debris from the ventilation openings. Ensure the machine is unplugged before cleaning.
• Verificarea cablului: Regularly inspect all welding cables, connections, and the power cord for cuts, fraying, or damage. Replace damaged components immediately.
• Conexiuni terminale: Ensure all output terminals are clean and connections are tight. Loose connections can cause overheating and poor performance.
• Depozitare: Store the welding machine in a clean, dry environment, away from excessive dust, moisture, and corrosive materials.
• Funcționarea ventilatorului: Ensure the cooling fan is not obstructed and operates freely during use.

7. Depanare

This section provides solutions to common issues you might encounter during operation.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact YESWELDER customer service.

8. Specificații

Detailed technical specifications for the YESWELDER ARC-125D PRO Mini Inverter Welder.

Image 8.1: Technical specifications for the ARC-125D PRO.

Image 8.2: The ARC-125D PRO's compact size and light weight (2kg).

9. Garanție și asistență pentru clienți

YESWELDER is committed to providing quality products and customer satisfaction.

For any issues, questions, or concerns regarding your YESWELDER ARC-125D PRO welding machine, please refer to the contact information provided with your product packaging or visit the official YESWELDER website for support. When contacting support, please have your model number (ARC-125D PRO) and purchase details readily available.