Manual de instrucțiuni pentru regulatorul de încărcare solară PowMr 45A 100V MPPT

1. Introducere

This manual provides essential information for the safe and efficient operation of your PowMr 45A 100V MPPT Solar Charge Controller. Please read it thoroughly before installation and use to ensure optimal performance and longevity of the device.

The PowMr 45A 100V MPPT Solar Charge Controller is designed to maximize power harvest from your solar panels and efficiently charge various battery types, including Sealed, LiFePO4, Gel, and Flooded batteries. It features an LCD display for parameter monitoring and adjustment, along with a USB port for convenience.

2. Informații de siguranță

• Asigurați-vă că toate cablajele sunt efectuate de personal calificat.
• Always connect the battery to the controller first, then the solar panels. Disconnect in reverse order.
• Nu depășiți volumul maxim de intraretage of 100V from the solar panels.
• Instalați controlerul într-o zonă bine ventilată pentru a preveni supraîncălzirea.
• Avoid direct sunlight exposure to the controller.
• Use appropriate wire gauges for all connections to prevent overheating and ensure safety.

3. Produs terminatview

The PowMr 45A 100V MPPT Solar Charge Controller features a robust design with an intuitive interface for easy monitoring and control.

3.1. Componente și interfață

• Display LCD: Shows real-time system data such as voltage, curentul, puterea și starea bateriei.
• Butoane de control: Used for navigating menus, adjusting parameters, and switching load output.
• Terminale de intrare solară: Connect to solar panels (PV).
• Terminale baterie: Connect to the battery bank.
• Terminale de ieșire de încărcare: Conectați la sarcini de curent continuu.
• Port senzor de temperatură: For connecting the external temperature sensor (included).
• Port de comunicație: For data monitoring and control via external devices (e.g., PC, mobile app).

4. Configurare și instalare

Follow these steps for proper installation of your MPPT solar charge controller:

1. Montare: Choose a suitable, well-ventilated location away from direct sunlight and moisture. Ensure adequate clearance around the unit for heat dissipation.
2. Pregătirea cablajului: Loosen the screws on the controller's wiring ports counterclockwise to accommodate the cables. Ensure the cable trough is sufficiently open.
3. Conexiune baterie: Connect the battery cables to the controller's battery terminals. Always connect the positive pole first, then the negative pole.
4. Conexiune panou solar: Connect the solar panel cables to the controller's solar input terminals. Ensure correct polarity (positive to positive, negative to negative).
5. Conexiune de încărcare: Connect your DC loads to the controller's load output terminals.
6. Senzor de temperatura: Plug the temperature sensor into its dedicated port and attach the sensor to the battery to ensure accurate temperature compensation.
7. Conexiuni sigure: After all connections are made, tighten all terminal screws securely. Gently tug on the wires to ensure they are firmly seated.

5. Instrucțiuni de utilizare

5.1. Interfață de afișare

The LCD display provides real-time information about your solar system. Short press the up/down scroll keys on the main interface to cycle through various parameter values. The system automatically switches parameter pages every 5 seconds if no button is pressed.

• Interfață principală: Shows solar panel input voltage, battery input voltage, and load output voltage.
• Cumulative Power Generation: Displays the total energy generated by the solar panels.
• Cumulative Discharge Capacity: Shows the total energy discharged to loads.
• Indicație de încărcare: Indicates if a load is connected and active.

5.2. Setări parametri

To enter the setting interface, press and hold the SET key on the main interface. In the setting interface, use the up/down page keys to select the desired battery type (e.g., Sealed, Gel, Flooded, Lithium, or custom). Short press the SET key to select input/output parameter values for adjustment. Use the up/down keys to modify the value, then press SET again to confirm and move to the next item.

The operating system automatically saves parameters and returns to the main interface after 10 seconds of inactivity. You can also press the ESC key to quickly save parameters and return to the main interface.

If system parameters are adjusted unreasonably, a fault indication will appear when returning to the main interface. To restore factory settings, press and hold both the SET and ESC keys simultaneously for 5 seconds on the main interface.

6. Întreținere

• Verificați periodic toate conexiunile cablurilor pentru strângere și coroziune.
• Keep the controller clean and free from dust and debris.
• Asigurați o ventilație adecvată în jurul unității pentru a preveni supraîncălzirea.
• Check the battery terminals for any signs of wear or damage.

7. Depanare

• LCD Not Lighting Up: Verificați volumul baterieitage and ensure all cables are correctly connected.
• Volumul baterieitage Not Displayed: Verify battery connections and ensure the battery is not completely discharged.
• Solar LED Indicator Not Lit: Ensure solar panel cables are correctly connected and that there is sufficient sunlight.
• Indicație de eroare: If a fault icon appears, refer to the manual for specific error codes and solutions. Incorrect parameter settings can trigger faults.

8. Specificații

9. Garanție și asistență

Pentru informații despre garanție, asistență tehnică sau solicitări de service, vă rugăm să consultați site-ul oficial PowMr. website-ul lor web sau contactați direct serviciul lor de asistență pentru clienți. Păstrați bonul fiscal ca dovadă a achiziției pentru reclamațiile în garanție.