1. Introducere
Welcome to the world of electric skateboarding with your new MEEPO Campus V5 Series/Envy Electric Skateboard. This manual provides essential information for the safe and optimal operation, maintenance, and care of your skateboard. Please read it thoroughly before your first ride to ensure a safe and enjoyable experience.
Figure 1: MEEPO Campus V5 Series/Envy Electric Skateboard (Top, Side, and Bottom Views)
2. Ghid de siguranță
Your safety is paramount. Electric skateboards can reach high speeds and require careful handling. Always adhere to the following safety guidelines:
- Purtați echipament de protecție: Purtați întotdeauna o cască, genunchiere, cotiere și apărători de încheietură.
- Check Your Board: Before each ride, inspect the board for any loose components, wheel damage, or battery issues.
- Understand Your Surroundings: Ride in safe, open areas away from traffic, pedestrians, and obstacles.
- Cunoaște-ți limitele: Start at low speeds and gradually increase as you become more comfortable.
- Conditii meteo: Evitați mersul pe suprafețe alunecoase, în condiții de umiditate ridicată, în ploaie abundentă sau în condiții de ploaie.
- Legi locale: Be aware of and comply with all local laws and regulations regarding electric skateboards.
- Limite de vârstă și greutate: This product is suitable for adults and teens. The maximum load capacity is 330 pounds.
3. Conținutul pachetului
Upon unboxing your MEEPO Campus V5 Series/Envy Electric Skateboard, please verify that all the following items are included:
- MEEPO Campus V5 Series/Envy Electric Skateboard (NLS3)
- Telecomanda
- Încărcător
- T-Tool (for adjustments)
- Spare Belts (245mm)
- Cablu de încărcare USB pentru telecomandă
- Manual de utilizare (acest document)
Figura 2: Componentele incluse
4. Montare și asamblare
4.1 Inspecția inițială
Before your first ride, carefully inspect your skateboard for any signs of damage during shipping. Ensure all screws are tightened and wheels spin freely.
4.2 Încărcarea bateriei
- Connect the charger to the charging port on the skateboard.
- Conectați încărcătorul la o priză standard de perete.
- Indicatorul luminos de pe încărcător se va schimba (de exemplu, din roșu în verde) când este complet încărcat.
- Timpul de încărcare este de aproximativ 2 ore pentru o încărcare completă.
4.3 Împerecherea telecomenzii
Your remote control should be pre-paired. If re-pairing is needed, refer to the specific instructions in the separate remote control manual or the official Meepo website-ul.
4.4 Wheel and Belt Installation/Adjustment
The NLS3 model uses belts for power transmission. Periodically check the tension and condition of these belts. If replacement is necessary, follow the steps demonstrated in the video below. Ensure the wheel is securely fastened after any adjustments or replacements.
Video: How to replace 245mm belts for NLS 3. This video demonstrates the process of removing and installing the drive belts on the MEEPO NLS3 electric skateboard, including loosening and tightening the necessary screws and properly seating the new belt.
5. Operating Your Electric Skateboard
5.1 Noțiuni introductive
- Turn on the skateboard and the remote control.
- Ensure the remote is connected to the board (check remote display).
- Place one foot on the board, then push off with the other foot to gain initial momentum.
- Gently push the throttle on the remote to accelerate.
5.2 Funcții de control de la distanță
The N5S Display Remote allows for precise control:
- Regulator: Push forward to accelerate, pull back to brake.
- Moduri de viteză: Switch between different speed modes (e.g., Beginner, Eco, Pro) to match your skill level and riding environment.
- Afişa: Shows current speed, battery level (board and remote), and distance traveled.
5.3 Tehnici de călărie
- Poziție: Find a comfortable stance with your feet positioned over the trucks for balance.
- Cotitură: Lean into turns, similar to a traditional skateboard or snowboard.
- Frânare: Apply brakes smoothly to avoid sudden stops. Regenerative braking helps recharge the battery.
Figure 3: Proper Riding Stance
6. Întreținere
Regular maintenance ensures the longevity and performance of your electric skateboard.
6.1 Îngrijirea bateriei
- Încărcați complet bateria după fiecare utilizare, mai ales dacă o depozitați pentru perioade lungi de timp.
- Nu supraîncărcați și nu descărcați complet bateria.
- Store the board in a cool, dry place, away from direct sunlight and extreme temperatures.
6.2 Curățarea și depozitarea
- Wipe down the board with a damp cloth after each ride to remove dirt and debris.
- Avoid using harsh chemicals or excessive water, especially near electronic components.
- Store the board indoors in a dry environment.
6.3 Belt and Wheel Maintenance
- Regularly inspect drive belts for wear, cracks, or damage. Replace them as needed (refer to Section 4.4).
- Check wheels for cuts, cracks, or excessive wear.
- Ensure wheel nuts are tightened to prevent wobbling.
- Clean bearings periodically to maintain smooth wheel rotation.
Figure 4: Wheel and Motor Assembly
7. Depanare
If you encounter issues with your MEEPO electric skateboard, refer to the table below for common problems and solutions.
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Board not turning on | Baterie descărcată; Butonul de pornire nu a fost apăsat corect | Charge the board; Press and hold the power button firmly |
| Telecomanda nu se conectează | Remote battery low; Not paired; Interference | Charge remote; Re-pair remote (refer to remote manual); Move away from interference sources |
| Pierderea de putere în timpul mersului | Low board battery; Overheating; Loose connection | Charge board; Allow board to cool down; Check all connections |
| Unusual noises from wheels/motors | Debris in motor/belt; Worn bearings; Loose components | Clean motors/belts; Replace bearings; Tighten all screws |
| Interval redus | Battery degradation; Riding style; Terrain | Ensure full charge; Ride in Eco mode; Avoid steep hills or aggressive acceleration |
8. Specificații
Key technical specifications for the MEEPO Campus V5 Series/Envy Electric Skateboard (NLS3):
| Caracteristică | Caietul de sarcini |
|---|---|
| Marca | Meepo |
| Numele modelului | MB0094 (NLS3) |
| Viteza maximă | Up to 29 Mph (47 km/h) / 32 Mph (52 km/h) |
| Gama maximă | Până la 38 km (24 mile) |
| Baterie | 12S2P MolicelP42A, 362WH (8.4AH) |
| Timp de încărcare | Approx. 2 hours (with 4.5A fast charging) |
| Motoare | 2 x 2519W (HB-4240) |
| ESC | Hobbywing ESC (HB-9028-36A) |
| Materialul de pe punte | Pure Bamboo + Fiberglass (8 Ply) |
| Lungimea punții | 38.9 inchi (980 mm) |
| Lățimea punții | 12.2 inchi (254 mm) |
| Greutatea articolului | 9.7 kilograme |
| Capacitate de încărcare | 330 lire sterline |
| Dimensiunea roții | 90 milimetri |
| Camioane | 8-inch RKP (Reverse Kingpin) |
| Rezistenta la apa | IPX5 (Splash resistant, not submersible) |
Figure 5: Skateboard Components and Performance Overview
9. Garanție și asistență
9.1 Informații despre garanție
Your MEEPO Campus V5 Series/Envy Electric Skateboard comes with a limited warranty. Please refer to the official Meepo website or contact customer support for detailed warranty terms and conditions. The warranty period is typically 6 months from the date of purchase.
9.2 Asistență pentru clienți
For any questions, technical assistance, or warranty claims, please contact Meepo customer support:
- Oficial Website: www.meepoboard.com
- E-mail: info@meepoboard.com
- Chat live: Disponibil pe oficial website-ul.
- Adresa: G/f Hang Wai Indctmo 6 Kin Tai St Tuen Mun Nt Hong Kong
Meepo is committed to providing high-quality products and excellent customer service. Your satisfaction is our priority.
