1. Introducere
This user manual provides comprehensive instructions for the setup, operation, and maintenance of your Pro-Ject Debut EVO 2 Audiophile Turntable. The Debut EVO 2 represents the next generation of Pro-Ject's best-selling audiophile turntables, featuring a carbon fiber tonearm, electronic speed selection, and a pre-mounted Pick it MM EVO cartridge. Designed for longevity, this turntable offers premium vinyl listening experience.
2. Instrucțiuni de siguranță
Please read these safety instructions carefully before operating your turntable. Keep this manual for future reference.
- Alimentare electrică: Folosiți doar adaptorul de alimentare furnizat împreună cu unitatea. Asigurați-vă că volumultage se potrivește cu sursa de alimentare locală.
- Apă și umiditate: Do not expose the turntable to rain or moisture. Do not place objects filled with liquids, such as vases, on the apparatus.
- Surse de caldura: Do not place the turntable near heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliificatori) care produc căldură.
- Ventilare: Asigurați o ventilație corespunzătoare. Nu blocați nicio deschidere de ventilație.
- curatenie: Curățați doar cu o lavetă uscată. Evitați utilizarea de produse de curățare lichide sau cu aerosoli.
- Service: Do not attempt to service the turntable yourself. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Copii: A nu se lăsa la îndemâna copiilor. Piesele mici pot prezenta pericol de sufocare.
3. Ce se află în cutie
Carefully unpack all items from the packaging. Please ensure all components listed below are present:
- Pro-Ject Debut EVO 2 Turntable Unit
- Husă transparentă de praf
- Cablu de conectare (RCA)
- Adaptor de alimentare
- Raportor de aliniere
- Single Adapter (for 45 RPM records with large center hole)
- tavă
- Curea de transmisie
- Contragreutate
- Greutate antipatinaj
4. Ghid de instalare
Follow these steps to set up your Pro-Ject Debut EVO 2 turntable for optimal performance.
4.1. Amplasare și nivelare
Place the turntable on a stable, level surface away from vibrations and direct sunlight. Use a spirit level to ensure the turntable is perfectly horizontal. The adjustable feet can be used for fine-tuning the level.
Image: The Pro-Ject Debut EVO 2 turntable in Satin Steel Blue, showcasing its sleek design and stable base. Proper placement on a level surface is crucial for optimal sound quality.
4.2. Instalarea platoului și a curelei de transmisie
- Carefully place the heavy die-cast aluminum platter onto the spindle.
- Locate the drive belt. Gently stretch the belt around the sub-platter and the motor pulley. Ensure the belt is not twisted.
Imagine: O imagine detaliată view of the turntable's platter and the drive belt mechanism. The belt connects the motor pulley to the sub-platter, ensuring consistent rotation.
4.3. Tonearm Balancing and Tracking Force Adjustment
The Debut EVO 2 comes with a pre-mounted Pick it MM EVO cartridge. Follow these steps to balance the tonearm and set the tracking force:
- Scoateți apărătoarea stylusului din cartuș.
- Lower the tonearm lift.
- Carefully rotate the counterweight on the rear of the tonearm until the tonearm floats freely and is perfectly balanced horizontally.
- Once balanced, hold the counterweight steady and rotate the tracking force dial (the numbered ring on the front of the counterweight) to '0'.
- Rotate the entire counterweight (including the dial) counter-clockwise until the dial shows the recommended tracking force for the Pick it MM EVO cartridge, which is typically 1.8 grams. Refer to the cartridge specifications for precise values.
Image: A close-up of the tonearm assembly, showing the counterweight and the anti-skate mechanism. Proper adjustment of these components is vital for accurate tracking and sound reproduction.
4.4. Reglarea anti-patinaj
The anti-skate mechanism prevents the tonearm from being pulled towards the center of the record. The Debut EVO 2 uses a weight-on-string anti-skate system.
- Locate the small anti-skate weight and the anti-skate stub on the tonearm.
- Hang the loop of the anti-skate weight's string over the second groove of the anti-skate stub. This setting is generally suitable for the pre-mounted cartridge.
4.5. Conectarea la un Ampmai în viață
Connect the supplied RCA cable from the turntable's output jacks (L and R) to the PHONO input on your amplifier sau phono preamplifier. Ensure the ground wire is connected from the turntable to the ground terminal on your ampmai vie / preamplificator pentru a minimiza zumzetul.
Imagine: O imagine detaliată view of the turntable's rear panel, showing the left (L) and right (R) RCA output jacks, along with the ground terminal. These connections are essential for transmitting the audio signal to an ampmai în viață.
4.6. Conexiune la alimentare
Connect the power adapter to the DC input on the turntable and then plug it into a wall outlet.
4.7. Dustcover Installation
Carefully insert the hinges of the transparent dustcover into the receptacles at the rear of the turntable plinth.
5. Instrucțiuni de utilizare
5.1. Pornire/Oprire
The turntable is powered on when the power adapter is connected. There is no separate power switch. To turn off, disconnect the power adapter.
5.2. Selectarea vitezei
The Debut EVO 2 features electronic speed selection. Use the switch located on the plinth to select between 33 ⅓ RPM and 45 RPM. For 78 RPM records, a special belt and stylus are required (sold separately), and the speed switch can be set to 78 RPM after installing the appropriate belt.
5.3. Redarea unei înregistrări
- Pune o înregistrare pe platou.
- Select the correct playback speed (33 ⅓ or 45 RPM).
- Ridicați brațul folosind pârghia de ridicare a brațului.
- Carefully position the stylus over the lead-in groove of the record.
- Gently lower the tonearm using the tonearm lift lever. The stylus will descend onto the record and playback will begin.
5.4. Oprirea redării
- At the end of a record, the tonearm will remain in the run-out groove.
- Ridicați brațul folosind pârghia de ridicare a brațului.
- Return the tonearm to its rest and secure it with the tonearm clamp.
- Scoateți discul de pe platan.
6. Întreținere
Regular maintenance will ensure the longevity and optimal performance of your turntable.
6.1. Curățarea platanului rotativ
- Always disconnect the turntable from the power outlet before cleaning.
- Use a soft, lint-free cloth to wipe down the plinth and platter. Avoid abrasive cleaners or solvents.
- The dustcover can be cleaned with a soft, damp cloth. Avoid harsh chemicals that may scratch or cloud the acrylic.
6.2. Curățarea stylusului
- Use a dedicated stylus cleaning brush or fluid.
- Always brush the stylus from back to front (from the pivot point towards the tip) to avoid damaging the cantilever.
- Clean the stylus regularly to remove dust and debris that can degrade sound quality and damage records.
Imagine: Un prim-plan view of the pre-mounted Pick it MM EVO cartridge on the carbon fiber tonearm. Regular cleaning of the stylus is important for maintaining audio fidelity.
7. Depanare
If you encounter issues with your turntable, refer to the following common problems and solutions.
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| No power / No rotation | Power adapter not connected; Power outlet faulty; Drive belt dislodged or broken. | Check power connections; Try a different outlet; Re-seat or replace drive belt. |
| Niciun sunet de la unul sau ambele canale | Cable connection issues; Cartridge wiring loose; Amplifier input incorrect. | Check RCA and ground connections; Verify cartridge wires are secure; Ensure amplifier is set to PHONO input. |
| Sunet de zumzet | Ground wire not connected; Nearby electronic interference; Faulty cable. | Connect ground wire; Move turntable away from other electronics; Try a different RCA cable. |
| Distorted or skipping sound | Incorrect tracking force; Incorrect anti-skate; Dirty stylus; Damaged record. | Re-adjust tracking force and anti-skate; Clean stylus; Inspect record for damage. |
| Viteză de redare incorectă | Wrong speed selected; Drive belt issue. | Ensure correct speed (33/45 RPM) is selected; Check drive belt for proper seating. |
If the problem persists after attempting these solutions, please contact Pro-Ject customer support or your authorized dealer for assistance.
8. Specificații
| Caracteristică | Detaliu |
|---|---|
| Numele modelului | Debutul EVO 2 |
| Marca | Proiect |
| Dimensiunile produsului | 16.4 x 12.6 x 4.5 inci |
| Greutatea articolului | 13.2 lire sterline (6 kilograme) |
| Material | Fibră de carbon (braț) |
| Culoare | Satin Steel Blue (as per current product) |
| Tip motor | Curea-Drive |
| Tehnologia de conectivitate | Auxiliary (RCA output) |
| Componente incluse | Platan, capac transparent anti-praf, cablu de conectare, adaptor de alimentare, raportor de aliniere, adaptor individual |
| Cartuş | Pre-mounted Pick it MM EVO |
| tavă | 1.7kg anti-magnetic die-cast aluminum |
9. Garanție și asistență
Pro-Ject Audio Systems stands behind the quality of its products. The Pro-Ject Debut EVO 2 turntable is designed for longevity and comes with a 25-year spare parts availability guarantee, ensuring that your turntable can be maintained for a lifetime.
For technical support, warranty claims, or further assistance, please contact your authorized Pro-Ject dealer or visit the official Pro-Ject Audio Systems webPăstrați bonul fiscal ca dovadă a achiziției în scopul garanției.
Puteți găsi mai multe informații și resurse de asistență la Pro-Ject Store on Amazon.
