Introducere
The Pixio PS2S Titan Black Ultrawide Mega Heavy-Duty Premium Single Monitor Arm Stand is designed to securely hold ultrawide monitors up to 57 inches and support up to 59.4 lbs. This monitor arm provides flexible viewing angles with height, tilt, and swivel adjustments, along with integrated cable management to maintain an organized workspace.
Informații de siguranță
- Ensure the desk surface is sturdy enough to support the combined weight of the monitor arm and your monitor.
- Do not exceed the maximum weight capacity of 59.4 lbs (for flat monitors) or 48.4 lbs (for curved monitors).
- Always follow installation instructions carefully to prevent injury or damage to equipment.
- Păstrați piesele mici departe de copii.
- Adjust tension settings only when the monitor is attached to prevent the arm from springing up unexpectedly.
Conținutul pachetului
Verificați dacă toate componentele sunt prezente înainte de a începe instalarea:
- Ansamblu braț monitor
- Birou Clamp (C-clamp)
- Feronerie de montare cu inele de etanșare
- VESA Plate (75x75mm, 100x100mm)
- VESA Adapters (100x200mm, 200x100mm, 200x200mm)
- Șuruburi de montare (diferite dimensiuni)
- Allen Keys for adjustments
- Cleme de gestionare a cablurilor
Configurare și instalare
The Pixio PS2S Titan monitor arm offers two installation methods: C-clamp and Grommet mount. Choose the method best suited for your desk.
1. Choose Mounting Method
The monitor arm can be mounted using either a C-clamp for desk edges or a grommet mount for desks with a pre-drilled hole.
Image: Easy Installation options showing top-mounted clamp and grommet mount. The clamp supports desk thickness from 0.39" to 1.8" (10-45mm), and the grommet supports desk thickness from 0.39" to 1.6" (10-40mm).
Both methods allow for installation entirely from above the desk surface, ensuring a clean workspace.
2. Attach VESA Plate to Monitor
Attach the quick-release VESA plate to the back of your monitor using the appropriate screws. The VESA plate supports 75x75mm and 100x100mm patterns. For larger VESA patterns like 100x200mm, 200x100mm, or 200x200mm, use the included VESA adapters.
Image: Quick Release VESA Plate. This plate is compatible with VESA patterns 75x75mm, 100x100mm, and with included adapters, 100x200mm, 200x100mm, and 200x200mm.
3. Mount the Arm to the Desk
Secure the monitor arm base to your desk using either the C-clamp or grommet mount. Ensure the mount is tightened securely to prevent movement.
4. Attach Monitor to Arm
Slide the monitor (with the attached VESA plate) onto the arm's VESA head until it clicks securely into place. Ensure it is fully seated and locked.
Operare și reglaje
The Pixio PS2S Titan monitor arm allows for various adjustments to achieve optimal viewconfort.
Reglarea tensiunii
The arm features a spring-loaded mechanism for precise weight adjustments. Use the provided Allen key to adjust the tension. Turn clockwise for lighter monitors to increase tension, and counter-clockwise for heavier monitors to reduce tension. Adjust until the monitor holds its position freely.
Image: Close-up of the adjustment screw on the monitor arm, indicating where to insert the Allen key for precise weight adjustments.
Image: Diagram illustrating how to increase tension (turn clockwise for lighter monitors) or reduce tension (turn counter-clockwise for heavier monitors) using an Allen key.
Ajustări de poziție
The arm allows for extensive movement to find your ideal viewing position:
- Înclinare: Adjust the monitor angle from +60° to -20°.
- Rotaţie: Rotate the monitor ±90° (portrait to landscape).
- pivotare: Swivel the arm at various joints up to ±180° and the VESA head ±90°.
- Reglarea înălțimii: The arm provides a height range from 12.8" to 25.79" (325-655mm).
- Extensia brațului: The arm can extend up to 20.7" (526mm) from the mounting point.
Image: Diagram illustrating the range of motion for the monitor arm, including ±90° rotation, ±180° swivel at two joints, and tilt from +60° to -20°.
Managementul cablurilor
Utilize the integrated cable clips along the arm to route and conceal your monitor cables, keeping your workspace tidy.
Image: Close-up of the monitor arm showing integrated clips for cable management, designed to keep cords organized and out of sight.
Produs terminatview Video
Video: Official Pixio PS2S Titan Ultra-Heavy-Duty Single Monitor Arm overview. This video demonstrates the arm's features, including its heavy-duty construction, VESA compatibility, quick-release plate, adjustability (tilt, swivel, rotation), cable management, and easy installation methods.
Întreţinere
- Verificați periodic toate șuruburile și conexiunile pentru a vă asigura că rămân strânse.
- Clean the arm with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Do not lubricate the gas spring mechanism.
- If the arm becomes difficult to adjust, re-check the tension settings according to your monitor's weight.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Monitor arm sags or won't stay up. | Tensiunea este prea mică pentru greutatea monitorului. | Increase the gas spring tension using the provided Allen key (turn clockwise). |
| Monitor arm is too stiff or won't move down. | Tension is too high for the monitor's weight. | Decrease the gas spring tension using the provided Allen key (turn counter-clockwise). |
| Monitorul se oscilează sau este instabil. | Montare clamp/grommet is not tight enough, or VESA plate is not securely attached. | Asigurați-vă că biroul clamp/grommet is fully tightened. Verify the VESA plate is properly seated and locked onto the arm. |
| Cablurile nu sunt gestionate cu grijă. | Cables are not routed through the integrated clips. | Route all cables through the designated cable management clips on the arm. |
Specificații
| Caracteristică | Detaliu |
|---|---|
| Model | PS2S Titan |
| Compatibilitate dimensiuni monitor | 17" to 57" Ultrawide Monitors |
| Capacitate de greutate | Flat Monitors: 4.4 lbs - 59.4 lbs Curved Monitors: 4.4 lbs - 48.4 lbs |
| Compatibilitate VESA | 75x75mm, 100x100mm, 100x200mm, 200x100mm, 200x200mm |
| Gama de înălțime | 12.8" până la 25.79" (325-655 mm) |
| Extensie maximă a brațului | 20.7" (526 mm) |
| Unghi de înclinare | +60° ~ -20° |
| Unghi de rotație | ±90° |
| Unghi pivotant | ±90° (at VESA head), ±180° (at arm joints) |
| Opțiuni de montare | C-Clamp (Desk Thickness: 10-45mm), Grommet (Desk Thickness: 10-40mm) |
| Material | Metal |
| Culoare | Negru |
Image: Detailed diagram illustrating the height range (12.8" to 25.79") and maximum arm extension (20.7") of the monitor arm.
Image: Diagram indicating the monitor arm fits screens from 17" to 57" and supports weights up to 48.4 lbs (curved) or 59.4 lbs (flat).
Garanție și suport
For warranty information, technical support, or service inquiries, please visit the official Pixio website-ul lor web sau contactați departamentul de asistență pentru clienți. Consultați documentația de achiziție pentru termenii și condițiile specifice de garanție.
De asemenea, puteți vizita Magazinul Pixio pe Amazon pentru informații suplimentare despre produs și resurse de asistență.
