FIDECO YPZ230R USB 3.0 Hard Drive Docking Station Instruction Manual

1. Introducere

This manual provides detailed instructions for the FIDECO YPZ230R USB 3.0 Hard Drive Docking Station. This device is designed to support 2.5-inch and 3.5-inch SATA HDDs and SSDs, offering high-speed data transfer via USB 3.0 and an offline clone function. It is compatible with Windows, Mac OS, and Linux operating systems.

2. Produs terminatview

2.1 Conținutul pachetului

• FIDECO Hard Drive Docking Station (YPZ230R)
• Adaptor de alimentare
• USB C/A to USB B Cable
• Manual de instructiuni

2.2 Aspectul dispozitivului

The FIDECO YPZ230R docking station features two bays for hard drives, a control panel on the front, and connection ports on the rear.

Imaginea 2.2.1: Front and Rear Panel Layout of the FIDECO YPZ230R Docking Station.

• Panoul frontal: HDD Slots, RGB Light indicators, Power Light, Clone Button, Hard Drive Indicators (S1, S2), Clone Progress Bar (25%, 50%, 75%, 100%).
• Panoul din spate: USB 3.0 Interface (Type B), DC 12V Power Port, Power Button, RGB Switch.

2.3 Supported Drives

The docking station supports both 2.5-inch and 3.5-inch SATA I/II/III Hard Disk Drives (HDDs) and Solid State Drives (SSDs).

Imaginea 2.3.1: Supported Drive Types and Combinations.

3. Configurare

Follow these steps to set up your FIDECO YPZ230R Hard Drive Docking Station:

1. Conectare alimentare: Connect the provided power adapter to the DC 12V port on the rear of the docking station, then plug it into a power outlet.
2. Conectare la computer: Use the supplied USB C/A to USB B cable to connect the docking station's USB 3.0 port to an available USB port on your computer (desktop or laptop).
3. Introduceți unități: Insert your 2.5-inch or 3.5-inch SATA HDD/SSD into the available slots. Ensure they are firmly seated.
4. Pornire: Flip the Power Button on the rear of the docking station to the 'ON' position. The Power Light on the front panel will illuminate.

Imaginea 3.1: Docking Station connected to a laptop.

3.1 Despachetare și conectare inițială

This video demonstrates the unboxing process and initial connection of the FIDECO Hard Drive Docking Station.

Video 3.1.1: FIDECO Hard Drive Dock - Unboxing and Connection.

4. Instrucțiuni de utilizare

4.1 Transfer de date

Once connected to your computer and powered on, the inserted hard drives will be accessible for data transfer. The FIDECO YPZ230R supports USB 3.0 Super Speed, allowing data transfer rates up to 5Gbps. It is also backward compatible with USB 2.0/1.1.

Imaginea 4.1.1: High-Speed Data Transfer via USB 3.0.

4.2 Funcția de clonare offline

The docking station supports an offline clone function, allowing you to duplicate a source drive to a target drive without a computer connection. Ensure the target drive has equal or greater capacity than the source drive.

Imaginea 4.2.1: Offline Clone Setup.

1. Pregătiți unitățile: Insert the source HDD/SSD into Slot 1 and the target HDD/SSD into Slot 2.
2. Deconectare de la PC: Ensure the docking station is disconnected from your computer.
3. Pornire: Turn on the docking station using the Power Button on the rear.
4. Inițiază clona: Press and hold the 'Clone' button on the front panel for 3-5 seconds until the first blue light (25%) flashes.
5. Confirm Clone: Quickly press the 'Clone' button again to start the cloning process. The progress indicator lights (25%, 50%, 75%, 100%) will illuminate sequentially as the clone progresses. All four lights will be solid blue upon completion.

This video demonstrates the offline clone function:

Video 4.2.2: FIDECO Hard Drive Dock - Offline Clone Process.

4.3 lumini RGB

The docking station features RGB lights that indicate its status. You can turn these lights on or off by pressing the 'RGB Switch' located on the rear panel.

Imaginea 4.3.1: Docking Station with RGB Lights.

5. Hard Drive Initialization

New HDDs or SSDs must be initialized and formatted before they can be recognized and used by your computer. If your drive is not appearing, follow the steps below for your operating system.

5.1 Initialization under Windows

1. Right-click on 'This PC' (or 'My Computer') and select 'Manage'.
2. In the Computer Management window, navigate to 'Disk Management' under 'Storage'.
3. Locate your new drive, which will likely be marked as 'Unknown' or 'Not Initialized'.
4. Right-click on the disk and select 'Initialize Disk'.
5. Choose a partition style (MBR for drives up to 2TB, GPT for drives larger than 2TB) and click 'OK'.
6. Right-click on the 'Unallocated' space of the initialized disk and select 'New Simple Volume'.
7. Follow the New Simple Volume Wizard to assign a drive letter and format the volume (NTFS is recommended for Windows).

5.2 Initialization under Mac OS

1. Open 'Disk Utility' (found in Applications > Utilities).
2. Select your new drive from the sidebar (it may appear as 'Uninitialized').
3. Faceți clic pe butonul „Șterge” din bara de instrumente.
4. Enter a name for the drive, choose a format (e.g., APFS or ExFAT for cross-platform compatibility), and a scheme (GUID Partition Map is recommended).
5. Click 'Erase' to format the drive.

This video provides a visual guide for HDD initialization on both Windows and Mac OS:

Video 5.2.1: HDD Initialization under Windows and Mac OS.

6. Specificații

7. Depanare

• Hard Drive Not Recognized: If a new HDD/SSD is not recognized by your computer, it likely needs to be initialized and formatted. Refer to Section 5: Hard Drive Initialization for detailed steps.
• Viteză mică de transfer de date: Ensure the docking station is connected to a USB 3.0 port on your computer. Older USB 2.0 ports will result in slower speeds. Verify that your operating system and drivers support UASP for optimal performance.
• Offline Clone Fails: Double-check that the target drive's capacity is equal to or greater than the source drive's capacity. Ensure the clone button is pressed and held for 3-5 seconds until the first blue light flashes, then quickly pressed again to confirm.
• Luminile RGB nu funcționează: Press the 'RGB Switch' on the rear panel to toggle the lights on or off.
• Conexiune intermitentă: Ensure all cables (power and USB) are securely connected. Try using a different USB port on your computer.

8. Garanție și asistență

FIDECO offers firmware updates and technical support for this product. For any questions or assistance, please contact us at support@fideco.cn.