Juno 6-Pack 6-inch and 4-inch Wafer LED Downlights

Juno 6-Pack 6-inch and 4-inch Wafer LED Downlights User Manual

Model: 6-Pack 6-inch and 4-inch Wafer LED Downlights

Marcă: Juno

1. Introducere

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Juno 6-Pack 6-inch and 4-inch Wafer LED Downlights. These energy-efficient LED downlights feature Switchable White technology, allowing adjustment of color temperature, and a slim design for versatile installation.

2. Informații de siguranță

Vă rugăm să citiți cu atenție toate instrucțiunile înainte de instalare și să păstrați acest manual pentru referințe ulterioare. Nerespectarea acestor instrucțiuni poate duce la electrocutare, incendiu sau alte pericole.

  • Always turn off power at the circuit breaker before beginning installation or performing any maintenance.
  • Consultați un electrician calificat dacă nu sunteți sigur de procesul de instalare.
  • Asigurați-vă că toate conexiunile electrice respectă codurile și ordonanțele locale.
  • Nu modificați dispozitivul de fixare sau componentele acestuia.
  • These fixtures are rated for wet locations, making them suitable for various indoor and outdoor applications.
  • Do not install near heat sources or in areas with excessive moisture beyond wet location rating.

3. Conținutul pachetului

Verificați dacă toate componentele sunt prezente înainte de a începe instalarea:

  • 6x Juno 6-inch Wafer LED Downlights with integrated drivers
  • 1x Juno 4-inch Wafer LED Downlight with integrated driver (sold separately, included in this bundle)
  • Installation hardware (e.g., junction box, connectors)
Juno 6-Pack 6-inch and 4-inch Wafer LED Downlights with drivers

Imagine: Pesteview of the Juno 6-pack 6-inch and single 4-inch wafer LED downlights, showing the light fixtures and their associated driver boxes.

4. Specificații

CaracteristicăCaietul de sarcini
MarcaJuno
Model6-Pack 6-inch and 4-inch Wafer LED Downlights
Sursă de luminăLED integrat
Temperatura de culoareSwitchable White (3000K, 3500K, 4000K, 5000K)
Indicele de redare a culorilor (CRI)90+
Capacitatea de atenuareDimmable down to 10% brightness
Durată de viaţă50,000 de ore
Tip de instalareFlush Mount, Housing-free
Înălțimea dispozitivuluiSlim 2-inch (6-inch models), 1.7-inch (4-inch models)
Mediul de utilizareIndoor/Outdoor (Wet Location Rated)
MaterialCopper (Shade and general material)
TerminaAlb Mat

5. Configurare și instalare

These wafer LED downlights are designed for easy installation in new construction or remodeling projects, eliminating the need for traditional recessed housings. They are suitable for ceilings as shallow as 1.7 inches (4-inch models) or 2 inches (6-inch models).

Pașii de instalare:

  1. Opriți alimentarea: Locate the circuit breaker controlling the installation area and turn off the power.
  2. Pregătiți deschiderea: Cut a circular hole in the ceiling according to the specified diameter for your 6-inch or 4-inch fixture. Refer to the template provided with the product packaging for precise sizing.
  3. Conectare cablare: Open the junction box cover on the integrated LED driver. Connect the household electrical wires (live, neutral, ground) to the corresponding wires inside the junction box using appropriate wire connectors. Ensure all connections are secure.
  4. Cutie de joncțiune securizată: Place the junction box into the ceiling opening.
  5. Instalați dispozitivul: Connect the LED downlight fixture to the driver box via the quick-connect cable. Push the spring clips on the sides of the downlight upwards and insert the fixture into the ceiling opening. The clips will spring back down to hold the fixture securely in place.
  6. Restabiliți puterea: Reporniți alimentarea la întrerupător.
Close-up of Juno Wafer LED Downlight and driver

Imagine: Un prim-plan view of a single Juno wafer LED downlight connected to its external driver box, illustrating the compact design.

Juno Wafer LED Regressed Downlight features

Image: Graphic highlighting features of the Wafer LED Regressed Downlight, including easy installation, affordability, and a 5-year limited warranty.

6. Instrucțiuni de utilizare

Switchable White Feature:

Your Juno Wafer LED Downlights are equipped with Switchable White technology, allowing you to select from multiple color temperatures to suit your preference or application. The color temperature switch is located on the integrated driver box.

  • Before installing the fixture into the ceiling, locate the small switch on the side of the driver box.
  • Slide the switch to select your desired color temperature: 3000K (Warm White), 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight).
  • Once the desired setting is chosen, proceed with the installation. The color temperature cannot be changed without accessing the driver box.
Juno Switchable Color Temperatures

Image: A close-up of the driver box with a red switch indicating the selectable color temperatures: 2700K, 3000K, 3500K, 4000K, and 5000K.

Funcționalitate de reglare a luminii:

These downlights are dimmable down to 10% brightness. To utilize the dimming feature, ensure you connect the fixtures to a compatible LED dimmer switch (sold separately). Refer to the dimmer manufacturer's instructions for proper installation and operation.

7. Întreținere

Juno Wafer LED Downlights are designed for long-term, maintenance-free operation with an extended 50,000-hour service life.

  • curatenie: Pentru a curăța dispozitivul, asigurați-vă că este oprită alimentarea cu energie electrică. Folosiți o lavetă moale, uscată sau ușor umedă.amp Nu utilizați substanțe de curățare abrazive sau solvenți, deoarece acestea pot deteriora finisajul sau componentele electrice.
  • Durată de viață a LED-urilor: The integrated LEDs are not user-replaceable. The fixture is designed to provide consistent illumination for its rated lifespan.

8. Depanare

If you encounter issues with your Juno Wafer LED Downlights, refer to the following common troubleshooting steps:

  • Lumina nu se aprinde:
    • Verificați întrerupătorul pentru a vă asigura că este pornit.
    • Verify all wire connections are secure and correctly wired.
    • Ensure the light switch is in the 'ON' position.
  • Lumina pâlpâie sau se diminuează incorect:
    • Asigurați-vă că utilizați un variator de intensitate luminos compatibil cu LED-uri.
    • Verificați dacă există conexiuni slăbite la corpul de iluminat sau la variator.
    • The dimmer may not be compatible with the fixture; consult the dimmer's specifications.
  • Temperatură de culoare incorectă:
    • The color temperature switch on the driver box must be set before installation. If you need to change it, power off the fixture, carefully remove it from the ceiling to access the driver box, adjust the switch, and reinstall.

Dacă acești pași nu rezolvă problema, contactați serviciul de asistență pentru clienți.

9. Garanție și asistență

Garantie limitata:

Juno Wafer LED Downlights come with a Garanție limitată de 5 aniAceastă garanție acoperă defectele de materiale și de fabricație în condiții normale de utilizare. Vă rugăm să păstrați dovada achiziției pentru reclamațiile în garanție.

Asistență clienți:

For technical assistance, warranty inquiries, or replacement parts, please contact Juno customer support through their official website or the retailer where the product was purchased. Provide your product model number and date of purchase when contacting support.

Documente conexe - 6-Pack 6-inch and 4-inch Wafer LED Downlights

Preview Modul LED rotund cu model wafer ultra-subțire Juno, mini-modul regresiv - Ghid de instalare
Instrucțiuni complete de instalare pentru modulul regresiv mini rotund cu LED-uri ultra-subțiri, tip wafer, de la Juno. Acest ghid prezintă caracteristicile produsului, măsurile de siguranță, instalarea pas cu pas și depanarea downlight-urilor cu LED-uri cu temperatură de culoare comutabilă.
Preview Juno Wafer LED Round Deep Regressed Module - Switchable White Installation Guide
Installation instructions for the Juno Wafer LED Round Deep Regressed Module (WF4 DREG XX ALO 19 SWW5, WF6 DREG XX ALO20 SWW5). Features include selectable lumens and switchable color temperature. This guide covers safety precautions, step-by-step installation, and troubleshooting.
Preview Juno Ultra-Thin Wafer LED Round Module - Switchable White Installation Instructions
Comprehensive installation guide for the Juno Ultra-Thin Wafer LED Round Module (WF4 ALO19 SWW5, WF6 ALO20 SWW5). Features include selectable lumens and switchable color temperature (27K-50K). This document provides essential safety warnings, detailed step-by-step installation procedures, and troubleshooting tips for this TYPE IC rated recessed LED fixture. Instructions are available in English, Spanish, and French.
Preview Modul LED rotund cu regresie profundă Juno Wafer - Instrucțiuni de instalare
Ghid complet de instalare pentru modulul rotund cu LED-uri Wafer, cu regresie profundă, de la Juno (WF4 DREG XX ALO 19 SWW5, WF6 DREG XX ALO20 SWW5). Aflați cum să instalați acest downlight cu CCT și lumeni comutabili, eficient energetic, inclusiv măsuri de siguranță, instrucțiuni pas cu pas și sfaturi de depanare. Potrivit pentru diverse tipuri de tavane și conform cu Titlul 24 din California.
Preview Instrucțiuni de instalare pentru seria de accesorii Juno 6RLC Retrofit
Ghid complet de instalare pentru seria de corpuri de iluminat retrofit cu LED Juno 6RLC, o soluție de iluminat încastrat de 6 inch. Acest document oferă avertismente esențiale de siguranță, detalii despre produs, verificări de compatibilitate și instrucțiuni pas cu pas pentru instalare. Vă rugăm să rețineți: Acest produs a fost scos din producție.
Preview Carcasă încastrată pentru iluminat incandescent Juno TC6, pătrată, de 8 inci - Instalare și specificații
Specificații detaliate, ghid de instalare și coduri de produs pentru carcasa de iluminat incandescent încastrat pătrat Juno TC6 de 8 inch. Caracteristicile includ suporturi Real Nail cu 3 bare, protecție termică și compatibilitate cu becuri A19 de 100 W.amps.