Debitmetru de apă MOES cu intrare din alamă - Manual de instrucțiuni

Introducere

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your MOES Water Flow Meter. This device is designed to accurately measure water consumption and flow rate for various applications, including RV water tank filling, outdoor garden hose watering, and lawn sprinklers.

Image: MOES Water Flow Meter with its retail packaging, showcasing the device's design and the information on the box.

Caracteristicile produsului

• Pure Brass Inlet: Equipped with a heavy-duty pure brass inlet and metal thread for enhanced durability and secure connections.
• Precizie ridicată: Built-in Hall type sensor and IC chipset provide accurate measurements with a tolerance of less than 5%.
• 4 Measurement Modes: Easily switch between Real-time flow rate, Last-time water volume, Average daily water flow (last 7 days), and Total flow.
• Ecran LCD de înaltă definiție: An easy-to-read LCD screen with a one-touch control button displays water usage and flow rate.
• Gamă largă de măsurare: Measures up to a maximum of 99999L / 99999GAL.
• Design impermeabil: IPX6 waterproof rating ensures durability in outdoor conditions.
• Orientarea ecranului: The display can be inverted by long-pressing the button in auto mode for convenient viewing when installed upside down.

Image: A visual representation of the MOES Water Flow Meter's key features, including pure brass inlet, one-touch control, LCD display, high accuracy, units conversion, multiple measurement modes, compact design, and water & weather resistance.

Înființat

1. Instalarea bateriei

1. Locate the battery compartment cover on the side of the device.
2. Use a coin or a suitable tool to gently twist and open the battery cover.
3. Insert one CR2032 battery (included) into the compartment, ensuring correct polarity.
4. Replace the battery cover and twist to securely close it, ensuring a watertight seal.

Imagine: Prim-plan view of the MOES Water Flow Meter's battery compartment, showing the CR2032 battery and the twist-off cover for easy replacement.

2. Connecting the Water Flow Meter

1. Ensure the faucet is turned off before installation.
2. Attach the brass inlet of the water flow meter to your outdoor faucet or water source. Hand-tighten securely.
3. Connect your garden hose, sprinkler, or other watering equipment to the outlet of the water flow meter. Hand-tighten securely.
4. Ensure all connections are tight to prevent leaks. Teflon tape can be used for extra sealing if necessary.

Imagine: O imagine detaliată view of the MOES Water Flow Meter's pure brass inlet and a leak-proof sealing gasket, highlighting the robust connection points.

Instrucțiuni de operare

The MOES Water Flow Meter features a single button for easy navigation through its various modes and functions.

1. Pornire/Oprire

The device automatically powers on when water flows through it. It will automatically go to sleep if there is no operation or water flow within 1 minute to conserve battery.

2. Switching Measurement Modes

Press the button briefly to cycle through the four measurement modes:

• Real-time Flow Rate: Displays the current water flow in Gallons/Minute or Liters/Minute.
• Last-time Water Volume: Shows the total water consumed during the previous watering session.
• Average Daily Water Flow: Displays the average daily water consumption over the last 7 days (counts from the next day).
• Total Flow: Accumulates the total water consumption since the last manual reset.

Image: A visual guide illustrating the four different measurement modes of the MOES Water Flow Meter: Single Mode (Last-time water consumption), Flow Mode (real-time water flow rate), AVG Mode (daily water consumption of the last 7 days), and Total Mode (total water consumption).

3. Switching Measurement Units (Gallon/Liter)

In the Real-time Flow Rate mode, long-press the button to switch the display units between Gallons/Minute (GAL/Min) and Liters/Minute (L/Min).

4. Resetting Values

To reset the Last-time Water Volume, Average Daily Water Flow, or Total Flow, navigate to the desired mode and long-press the button until the value resets to 0.0.

5. Screen Orientation

If the display values appear upside down due to installation orientation, switch the mode to 'Auto' (Real-time Flow Rate) and then long-press the button to reverse the values for correct viewing.

Întreţinere

1. Înlocuirea bateriei

When the battery indicator on the LCD screen shows low power, replace the CR2032 battery as described in the Setup section (Battery Installation).

2. Curăţarea filtrului

Periodically check the metal filter washer located in the brass inlet for any debris or blockages. If clogged, remove the filter and clean it under running water. Reinstall the filter before reattaching the meter to the water source.

3. Prevenirea scurgerilor

Regularly inspect all connections for leaks. Ensure the brass inlet and hose connections are securely tightened. If leaks persist, check the rubber gaskets for wear or damage and replace if necessary. Using Teflon tape on threaded connections can help prevent leaks.

Depanare

Specificații

• Evaluare rezistentă la apă: IPX6
• Debitul de apă: 1 ~ 45.0 L/Min (12.0 GAL/Min)
• Max Water Consumption: 99999 L / 99999 GAL
• Presiune de lucru: 0.5 ~ 10.0 Bar
• Toleranță de măsurare: ±5%
• Temperatura apei: 3°C ~ 65°C / 37.4°F ~ 149°F
• Potrivit pentru: Sprinkler, furtun standard de robinet de 3/4 inch
• Baterie: 1 baterie CR2032 (inclusă)
• Material: Plastic with Brass Inlet
• Dimensiuni produs: 7.09" D x 5.11" L x 3.43" H
• Greutatea articolului: 0.14 kilograme (4.8 uncii)

Image: Technical drawing showing the dimensions of the MOES Water Flow Meter in both millimeters and inches, along with labels for the 3/4" Faucet Connector and 3/4" outlet.

Informații suplimentare