Introducere
This manual provides detailed instructions for the assembly, operation, and maintenance of your Yaheetech Metal Twin Bed Frame (Model YT-00136885). Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Informații de siguranță
Măsuri importante de siguranță:
- Do not load more than 204 kg (450 lb) onto the bed frame.
- Carefully follow all assembly instructions to prevent instability or collapse.
- Procedați cu atenție la marginile ascuțite în timpul asamblării și utilizării.
- Ensure the bed frame is securely assembled to prevent unintended movement.
- Păstrați piesele mici departe de copii în timpul asamblarii.
Lista de piese
Before assembly, verify that all components listed below are present and undamaged. Refer to the assembly video for visual identification of parts.
Componente ale cadrului:
- Secțiuni de tăblie și picior de pat
- Sine laterale
- Center Support Beam with legs
- Lamele metalice
Hardware:
- Various bolts, nuts, and washers (as per included hardware pack)
- Hex key and wrench (provided for assembly)
Instructiuni de asamblare
Follow these steps to assemble your Yaheetech Metal Twin Bed Frame. It is recommended to assemble the bed frame on a soft, clean surface to prevent scratches.
Ghid video de asamblare:
Video 1: Step-by-step assembly guide for the Yaheetech Metal Bed Frame. This video demonstrates the complete assembly process from unboxing to the final structure.
Step-by-Step Written Instructions:
- Asamblați tăblia și piciorul patului:
Attach the vertical support posts to the decorative headboard/footboard panels using the provided bolts and washers. Ensure all connections are secure but do not fully tighten until all parts are aligned.
Figure 2: Detail of the headboard's curved design, showing the attachment points for the vertical posts. - Atașați șinele laterale:
Connect the side rails to the assembled headboard and footboard sections. Use the appropriate bolts and washers, ensuring the side rails are correctly oriented. Hand-tighten bolts initially.
- Instalați grinda de susținere centrală:
Position the center support beam, including its legs, in the middle of the frame. Secure it to the side rails using the designated hardware. This beam provides additional stability.
Figure 3: Illustration of L-shaped plates used to fasten frame components, enhancing structural stability. - Plasați lamele metalice:
Lay the metal slats across the frame, fitting them into the designated slots on the side rails. Ensure all slats are evenly spaced and securely seated. The side rails are designed to be higher than the inserted slats to prevent mattress movement.
Figure 4: Detail showing the built-in metal slats and the raised side rail design, which helps to keep the mattress in place. - Strângere finală:
Once all components are in place and aligned, use the provided hex key and wrench to fully tighten all bolts. Do not overtighten. Verify the frame is stable and level.
Caracteristicile produsului
- Construcție durabilă: Crafted from heavy-duty powder-coated metal for long-lasting use.
- Integrated Headboard and Footboard: Features a curved design that adds to the aesthetic and helps secure bedding.
- Nu este necesar somier: The metal slat system provides direct support for your mattress.
- Mattress Retention: Side rails are designed to be higher than the slats, preventing the mattress from sliding.
- Depozitare sub pat: Offers approximately 13 inches of clearance beneath the frame for storage solutions.
- Rezistență la scârțâit: Engineered for a stable and quiet sleep experience.
Specificații
| Caracteristică | Detaliu |
|---|---|
| Marca | Yaheetech |
| Numărul de model | YT-00136885 |
| Dimensiune | Geamănă |
| Culoare | Negru |
| Material | Metal |
| Dimensiuni produs (L x l x H) | 196.5 x 104.5 x 88.5 cm (77.5 x 41 x 35 țoli) |
| Greutatea articolului | 13.2 kg (29.2 lb) |
| Capacitate maximă de greutate | 204 kg (450 lb) |
| Garda la sol | 13 inci |
| Dimensiune saltea compatibilă | Twin (75" x 39") |
| Caracteristici speciale | Curved Design Headboard, No Box Spring Needed, Squeak Resistant, Sturdy, Under Bed Storage |
Întreţinere
To ensure the longevity and optimal performance of your bed frame, follow these maintenance guidelines:
- curatenie: Ștergeți cadrul metalic cu o lavetă moale șiamp Evitați produsele de curățare abrazive sau substanțele chimice dure care ar putea deteriora finisajul.
- Strângeți elementele de fixare: Verificați periodic toate șuruburile și șuruburile pentru a vă asigura că rămân strânse. Strângeți-le din nou, după cum este necesar, pentru a menține stabilitatea și a preveni scârțâitul.
- Evitați supraîncărcarea: Do not exceed the maximum weight capacity of 204 kg (450 lb) to prevent structural damage.
- Relocare: Când mutați cadrul patului, ridicați-l în loc să-l târâți pentru a preveni deteriorarea cadrului sau a podelei.
Depanare
Dacă întâmpinați probleme cu cadrul patului, consultați următoarele probleme și soluții frecvente:
- Zgomote de scârțâit:
Squeaking often indicates loose connections. Re-tighten all bolts and screws on the frame, especially where the side rails connect to the headboard/footboard and the center support beam.
- Instabilitate/Oscilație a cadrului:
Ensure all bolts are fully tightened. Verify that the center support legs are making firm contact with the floor. Check that all frame components are correctly aligned as per the assembly instructions.
- Saltea glisantă:
The bed frame is designed with raised side rails to minimize mattress sliding. Ensure the mattress is correctly positioned within the frame. If sliding persists, consider using a non-slip mattress pad.
Garanție și suport
For warranty information or technical support, please refer to the documentation included with your purchase or contact Yaheetech customer service directly. Contact details can typically be found on the manufacturer's website-ul sau chitanța dumneavoastră de achiziție.
