Introducere
This manual provides comprehensive instructions for the safe and effective operation of the MASTECH MS6252D Digital Anemometer. Please read this manual thoroughly before using the device and retain it for future reference.
The MS6252D is a versatile digital anemometer designed for measuring wind speed, air volume, ambient temperature, and humidity. It features a wireless interface for convenient data transfer and a clear display with backlight for easy readability.
Produs terminatview
Figura 1: Față view of the MS6252D Digital Anemometer, showing the impeller, LCD display, and control buttons.
Figura 2: Spate view of the MS6252D Digital Anemometer, showing the battery compartment cover.
Figura 3: Spate view of the MS6252D Digital Anemometer with the battery compartment open, revealing the battery slot.
Caracteristici cheie:
- Display 9999 counts for precise readings.
- Automatic Power Off function to conserve battery life.
- Adjustable Flow Area Setting for accurate air volume calculations.
- MAX / MIN measurement modes to capture extreme values.
- Data Hold function to freeze current readings on the display.
- Display Backlight for improved visibility in low-light conditions.
- Low Battery Display indicator.
- Selectable temperature units (℃/℉).
- Measurement of Ambient temperature, Dew Point, and Wet Bulb temperature.
- Wireless Interface for data connectivity.
Înființat
Instalare baterie:
- Localizați compartimentul bateriei de pe spatele dispozitivului.
- Folosiți o șurubelniță mică pentru a deschide capacul compartimentului bateriei.
- Insert 2 LR44 batteries, ensuring correct polarity (+/-).
- Puneți la loc capacul compartimentului bateriei și fixați-l cu șurubul.
Pornire inițială:
Apăsați tasta PUTERE button to turn on the device. The display backlight will illuminate, and the device will perform a self-test before entering measurement mode.
Instrucțiuni de operare
Measuring Wind Speed:
Hold the anemometer so that the impeller faces directly into the airflow. The wind speed will be displayed on the LCD. Use the UNITATE button to cycle through different units (m/s, km/h, ft/s, Knots, mile/h, ft/m).
Measuring Air Volume:
To measure air volume (CFM, CMM, CMS), you must first set the flow area. Refer to the 'Flow Area Setting' section for detailed instructions. Once the area is set, the device will calculate and display the air volume based on the measured wind speed.
Temperature and Humidity Measurement:
The device automatically measures ambient temperature and humidity. Press the ANGAJAT button to cycle through Ambient Temperature, Dew Point, and Wet Bulb temperature displays. Use the ℃ / ℉ butonul pentru a comuta între Celsius și Fahrenheit.
MAX/MIN and Data Hold:
- Presa MAX/MIN once to display the maximum recorded value. Press again for the minimum value. Press a third time to exit MAX/MIN mode.
- Presa ȚINE to freeze the current reading on the display. Press ȚINE again to release and resume live measurements.
Iluminare de fundal a afișajului:
Apăsați tasta APRINDE button to turn the display backlight on or off. The backlight will automatically turn off after a period of inactivity to save power.
Întreţinere
curatenie:
Ștergeți dispozitivul cu un material moale, damp cloth. Do not use abrasive cleaners or solvents. Ensure the impeller is free from dust and debris for accurate readings.
Înlocuire baterie:
When the low battery indicator appears on the display, replace the batteries as described in the 'Battery Installation' section. Dispose of old batteries responsibly.
Depozitare:
If the device will not be used for an extended period, remove the batteries to prevent leakage. Store the anemometer in a cool, dry place, away from direct sunlight and extreme temperatures.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Dispozitivul nu pornește. | Baterii descărcate sau instalate incorect. | Verificați polaritatea bateriilor sau înlocuiți bateriile. |
| Citiri inexacte. | Impeller obstructed or dirty; incorrect flow area setting. | Clean the impeller; verify and adjust flow area setting. |
| Afișajul este întunecat sau gol. | Baterie descărcată; iluminare de fundal oprită. | Replace batteries; press the LIGHT button to activate backlight. |
| Probleme de conexiune wireless. | Out of range; interference; software issue. | Move closer to the receiver; check for sources of interference; restart device and software. |
Specificații
Figura 4: Pesteview of MS6252D features, specifications, and included accessories.
Figure 5: Detailed technical specifications including measurement ranges, resolutions, and accuracies.
| Parametru | Valoare |
|---|---|
| Numărul de model | GL-MS6252D |
| Afișează numărătorii | 9999 |
| Sursa de alimentare | 2 baterii LR44 (incluse) |
| Dimensiuni produs (L x l x H) | 6.3 x 3.54 x 1.97 inci |
| Greutatea articolului | 0.5 kilograme (1.1 livre) |
| Material | Acrilonitril Butadien Stiren (ABS) |
| Interval de temperatură | -10℃ la 60℃ (14℉ la 140℉) |
| Wind Speed Range (m/s) | 0.80 ~ 30.00 m / s |
| Wind Speed Range (km/h) | 2.88 ~ 108.0 km/h |
| Wind Speed Range (ft/s) | 2.62 ~ 98.50 ft/s |
| Wind Speed Range (Knots) | 1.6 ~ 58.30 noduri |
| Wind Speed Range (mile/h) | 1.8 ~ 90.00 mile/h |
| Wind Speed Range (ft/m) | 157.5 ~ 5900 ft/m |
| Interval de umiditate relativă | 20-80% RH |
| Interfață | Fără fir |
Garanție și suport
MASTECH/MGL provides a 1-year EU Spare Part Availability Duration for this product. For technical support, warranty claims, or service inquiries, please contact your local distributor or visit the official MASTECH website-ul.
Vă rugăm să păstrați bonul fiscal ca dovadă a achiziției în scopul garanției.