Poly Wall Mount for TC10 Instruction Manual

Introducere

The Poly Wall Mount for TC10 is designed to provide a secure, elegant, and professional way to position your Poly TC10 device. This mount ensures optimal visibility and accessibility for the TC10, making it an ideal solution for various environments where the TC10 needs to be wall-mounted.

Informații de siguranță

• Always ensure the mounting surface is structurally sound and can support the weight of the mount and the Poly TC10 device.
• Folosiți unelte și accesorii adecvate pentru instalare. Dacă nu sunteți sigur, consultați un profesionist calificat.
• Păstrați piesele mici și materialele de ambalare departe de copii pentru a preveni pericolele de sufocare.
• Do not overtighten screws, as this may damage the mount or the mounting surface.
• Asigurați-vă că toate cablurile sunt pozate în siguranță pentru a preveni pericolele de împiedicare sau deteriorarea.

Ce este în cutie

Verificați dacă toate componentele sunt prezente înainte de a începe instalarea.

• Wall mount for TC10
• Mounting hardware (screws, anchors - specific types may vary based on package)

Configurare și instalare

Follow these steps to properly install your Poly Wall Mount for TC10.

Instrumente necesare (nu sunt incluse):

• Burghiu
• Șurubelniță (se recomandă cap Phillips)
• Creion
• Nivel

Pașii de instalare:

1. Alegeți locația: Select a suitable wall location for the Poly TC10, ensuring it is at an appropriate height for interaction and visibility. Consider proximity to power outlets and network connections for the TC10.
2. Marcați punctele de găurire: Hold the wall mount against the desired location on the wall. Use a pencil to mark the positions for drilling through the mounting holes on the bracket. Use a level to ensure the marks are aligned horizontally.
3. Găuriți găuri pilot: Using an appropriate drill bit size for your wall anchors (if applicable) and screws, drill pilot holes at the marked points.
4. Insert Anchors (if needed): If drilling into drywall or other hollow surfaces, insert wall anchors into the pilot holes until flush with the wall surface.
5. Atașarea suportului pe perete: Align the wall mount with the drilled holes (and anchors). Insert the provided screws through the mount's holes and into the wall/anchors. Tighten the screws securely with a screwdriver, but do not overtighten.
6. Mount Poly TC10: Carefully align the Poly TC10 device with the mounted bracket. Gently slide or click the TC10 into place on the wall mount, ensuring it is securely seated and locked. Refer to the Poly TC10's own manual for specific attachment instructions if necessary.
7. Organizare de cabluri: Route any necessary cables (power, network) for the TC10 neatly behind or alongside the mount to maintain a clean and professional appearance.

Image: Poly TC10 securely mounted on a wall using the Poly Wall Mount.

Operarea monturii

The Poly Wall Mount is a passive accessory designed to hold the Poly TC10. Its operation is integrated with the use of the TC10 device itself.

• Once the TC10 is securely mounted, it is ready for use as per its own operational guidelines.
• The mount provides a stable and fixed position for the TC10, allowing for consistent interaction.
• Ensure the TC10 is properly seated in the mount at all times to prevent accidental dislodgement.

Întreţinere

Pentru a asigura longevitatea și aspectul suportului de perete:

• Clean the mount periodically with a soft, dry cloth.
• Evitați utilizarea de produse de curățare abrazive sau solvenți, deoarece acestea pot deteriora finisajul.
• Verificați periodic șuruburile de montare pentru a vă asigura că rămân strânse și sigure.

Depanare

Specificații

Garanție și suport

For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official Poly website. For technical support or further assistance, please contact Poly customer service through their official support channels.

Official Poly Website: www.poly.com