Sure-Lites APC7RG

Manual de utilizare Sure-Lites All-Pro APC7RG, indicator de ieșire cu LED combinat și lumină de urgență

Model: APC7RG

1. Introducere

This manual provides detailed instructions for the installation, operation, and maintenance of the Sure-Lites All-Pro APC7RG Combination LED Exit Sign and Emergency Light. This unit is designed to meet code requirements for emergency egress lighting in commercial buildings, offering both an illuminated exit sign and emergency lighting with adjustable LED heads.

Eight Sure-Lites All-Pro APC7RG Combination LED Exit Signs and Emergency Lights

Imaginea 1.1: Pesteview of the Sure-Lites All-Pro APC7RG Combination LED Exit Sign and Emergency Light units.

2. Informații de siguranță

Please read and understand all instructions before installation and operation. Retain this manual for future reference.

  • Siguranta electrica: All wiring must be performed by a qualified electrician in accordance with national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
  • Integritatea produsului: Do not modify or alter the product. Use only manufacturer-specified replacement parts.
  • Locaţie: This unit is UL certified and damp location listed. Ensure the installation environment is suitable.
  • Baterie: The unit contains a nickel-cadmium battery. Dispose of batteries according to local regulations.

3. Conținutul pachetului

Verificați dacă toate componentele sunt prezente înainte de a începe instalarea:

  • Sure-Lites All-Pro APC7RG Combination LED Exit Sign and Emergency Light Unit
  • Snap-fit canopy with captive mounting screws
  • Directional chevrons (snap-in/snap-out)
  • Installation hardware (screws, wire nuts)
  • Nickel Cadmium Battery (pre-installed or separate)

4. Configurare și instalare

The APC7RG is designed for easy installation with universal J-box mounting and snap-fit construction, allowing for installation in under 5 minutes.

4.1 Opțiuni de montare

The unit offers universal surface mounting flexibility and can be configured for:

  • Montare pe tavan
  • Suport de perete
  • End mount

It supports configurable single or double faces.

Diagram showing easy installation features: snap-fit construction, ceiling/wall/back mount, 90 minutes run time, and 17 feet egress coverage.

Image 4.1: Key installation and performance features.

4.2 Cablare

  1. Asigurați-vă că alimentarea este OPRITĂ la întrerupătorul de circuit.
  2. Connect the unit's wiring to the building's AC power supply (120V) according to local electrical codes.
  3. Secure the unit to the universal J-box using the provided hardware and snap-fit canopy.

4.3 Field Selectable Features

The APC7RG exit face is illuminated with long-lasting LEDs that are field selectable for red or green letters. The unit is pre-set to red letters and can be easily changed to green letters during installation. Snap-in/snap-out directional chevrons (arrows) can also be configured to indicate the direction of egress.

Diagram showing components of the exit sign: selectable single or double faces, snap-in/snap-out directional chevrons, high impact UV resistant housing, nickel cadmium battery, field selectable red or green LEDs and inserts, and long life LEDs.

Imaginea 4.2: Explodată view highlighting field-selectable features and components.

Two images showing the exit sign in different commercial settings, one with red letters and one with green letters, demonstrating the selectable faces feature.

Imaginea 4.3: Example of selectable red or green exit sign faces in commercial environments.

5. Instrucțiuni de utilizare

5.1 Funcționare normală

When AC power is supplied, the LED exit sign will illuminate, and the battery will charge. A power indicator light (usually green) located on the bottom of the exit sign will confirm AC power is present and the battery is charging.

5.2 Operare de urgență

In the event of an AC power failure, the unit will automatically switch to battery backup mode. The exit sign and emergency lights will operate for a minimum of 90 minutes, providing up to 17 feet of emergency egress coverage.

5.3 Testare

A test switch is located on the bottom of the exit sign. Press and hold the test switch to simulate a power outage. The unit should switch to battery power, and the exit sign and emergency lights should illuminate. Release the switch to return to normal operation. Regular testing is recommended to ensure proper functionality.

6. Întreținere

  • Baterie: The nickel-cadmium battery is designed for no maintenance. However, it is recommended to perform monthly 30-second functional tests and annual 90-minute discharge tests to ensure the battery holds a charge and the unit operates correctly during an emergency.
  • curatenie: Curăţaţi exteriorul unităţii cu un material moale, damp pânză. Nu utilizați agenți de curățare abrazivi sau solvenți.
  • Inspecţie: Periodically inspect the unit for any physical damage or discoloration.

7. Depanare

Consultați tabelul de mai jos pentru problemele comune și soluțiile acestora.

ProblemăCauza posibilaSoluţie
Exit sign or emergency lights do not illuminate during power outage.Battery not charged or faulty; unit not connected to AC power.Ensure AC power is connected and indicator light is on. Allow 24 hours for initial battery charge. If problem persists, battery may need replacement.
Indicatorul luminos de alimentare este stins.No AC power; faulty wiring; indicator light malfunction.Check circuit breaker. Verify wiring connections. Contact a qualified electrician if necessary.
Emergency lights do not stay on for 90 minutes during test.Capacitatea bateriei este redusă.Perform a full 90-minute discharge test and recharge. If run time is still insufficient, the battery may need replacement.

8. Specificații

Key technical details for the Sure-Lites All-Pro APC7RG unit:

Diagram showing the dimensions of the Sure-Lites All-Pro APC7RG exit sign: 16.57 inches (421mm) length, 2.32 inches (59mm) width, 8.26 inches (210mm) height. Also indicates damp location rating, operating temperature range, selectable faces, UL certification, and T20 compliance.

Imaginea 8.1: Dimensiunile și certificările produsului.

CaracteristicăDetaliu
MarcaSure-Lites
Numele modeluluiAPC7RG Case Pack
Numărul pieseiAPC7RG
MaterialHigh-impact, UV resistant thermoplastic (Polycarbonate)
CuloareWhite finish, Red/Green selectable light
Dimensiuni produs (L x l x H)16.57 cm x 2.32 cm x 8.26 cm
Tip sursă de luminăLED
Numărul de surse de lumină2 (emergency heads)
Wattage2.01 wați
Luminozitate156 lumeni
Voltage120 volți
Sursa de alimentareElectric cu fir
Tip baterieNickel Cadmium (NiCAD)
Average Battery Life (Emergency Run Time)90 minute
Egress CoveragePână la 17 de picioare
Tip de instalareFlush Mount (Universal J-box)
CertificariUL 924, NEC, NFPA101, NFPA70, CEC Title 20 compliant, Damp Locație listată
Greutatea articolului21.4 livre (pentru pachetul de 8)

9. Garanție și asistență

9.1 Informații despre garanție

The Sure-Lites All-Pro APC7RG unit comes with a 5-year limited warranty. The NiCad battery carries a seven-year pro-rated warranty. Please refer to the warranty documentation included with your purchase for full terms and conditions.

9.2 Asistență pentru clienți

For technical assistance, replacement parts, or warranty claims, please contact Sure-Lites customer support. Contact information can typically be found on the manufacturer's website-ul sau pe ambalajul produsului.

Documente conexe - APC7RG

Preview Sure-Lites EBPLEDL6SF Driver LED de urgență - Specificații și date despre produs
Specificații detaliate, caracteristici și date de instalare pentru driverul LED de urgență Sure-Lites EBPLEDL6SF de la Cooper Lighting Solutions. Include produsul de mai sus.view, date tehnice, certificări și desene dimensionale.
Preview Manual de instalare a balastului de urgență Sure-Lites EBP1400NCX/NCF
Ghid complet de instalare, utilizare și întreținere pentru balasturile de urgență Sure-Lites EBP1400NCX și EBP1400NCF, care detaliază precauțiile de siguranță, schemele de conectare și informațiile de mai jos.amp compatibilitate.
Preview Sure-Lites ELX Series LED Exit Sign - Technical Specifications
Detailed technical specifications for the Sure-Lites ELX Series self-powered LED exit signs, including features, construction, code compliance, energy data, and mounting options.
Preview Sure-Lites FirstLink Connected Emergency Lighting System | Cooper Lighting Solutions
Explore the Sure-Lites FirstLink connected emergency lighting system from Cooper Lighting Solutions. This brochure details system features, hardware, app control, and service plans designed for building safety and code compliance.
Preview Sure-Lites All-Pro APX RG Series LED Exit Sign - Technical Specifications
Detailed specifications for the Sure-Lites All-Pro APX RG Series LED Exit Sign, featuring thermoplastic housing, selectable red or green faces, AC-only or battery backup options, and compliance with UL924 and California Title 20.
Preview Sure-Lites APEL Series Emergency Lighting Fixture
Explore the Sure-Lites APEL Series emergency light, featuring UL 924 listing, 90-minute runtime, adjustable LED heads, and a durable nickel cadmium battery. Ideal for reliable emergency egress with remote capacity options.