Informații importante privind siguranța
Vă rugăm să citiți și să înțelegeți toate instrucțiunile înainte de a începe instalarea. Nerespectarea acestor instrucțiuni poate duce la electrocutare, incendiu sau alte pericole care ar putea provoca vătămări corporale sau daune materiale.
- Deconectați alimentarea: Always turn off power at the circuit breaker before installing, servicing, or removing the fixture.
- Electrician calificat: Instalarea trebuie efectuată de către un electrician calificat sau de o persoană familiarizată cu construcția și funcționarea produsului, precum și cu pericolele implicate.
- Împământare: Ensure the fixture is properly grounded to avoid potential electrical shock.
- Damp Locație evaluată: Acest dispozitiv este potrivit pentru damp locations, such as bathrooms and showers, but not for direct water exposure.
- Compatibilitate: Use only with 120 VAC power supply. Do not attempt to modify the fixture.
- Căldură: LED fixtures generate heat. Allow adequate ventilation around the fixture.
Produs terminatview
The Maxxima MRL-61505 is a 5-inch and 6-inch retrofit recessed anti-glare LED downlight designed for easy installation into existing recessed can housings. It offers 1300 lumens of illumination and features 5 selectable color temperatures, ranging from warm white to daylight, to suit various lighting preferences. The fixture is dimmable and includes an E-26 quick connect adapter for convenient setup.
Caracteristici cheie:
- Eficient energetic: 15W LED equivalent to 100W incandescent light, reducing energy consumption.
- High Brightness: Provides 1300 lumens with an anti-glare design.
- 5 CCT Selectable: Choose from 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight) using a switch on the fixture.
- Reglabil: Compatible with most standard LED dimmers, offering a dimming range of 10% to 100%.
- Indicele ridicat de redare a culorilor (CRI): 90 CRI ensures accurate color appearance.
- Construcție durabilă: Made with a cast aluminum body for lightweight and robust performance.
- Design anti-orbire: Smooth baffle deep recessed trim minimizes glare.
Figura 1: Față view of the Maxxima Retrofit Recessed LED Downlight, showing the anti-glare design and E-26 adapter.
Figura 2: Înclinat view of the downlight, illustrating the mounting springs for installation into a recessed can.
Video 1: Un overview of the Maxxima Retrofit Anti-Glare LED Downlight, demonstrating its features and selectable color temperatures.
Configurare și instalare
Follow these steps to properly install your Maxxima LED Downlight:
- Opriți alimentarea: Before starting, ensure the power to the existing recessed can fixture is turned off at the circuit breaker.
- Remove Existing Trim: Carefully remove the existing bulb and trim from the recessed can.
- Connect E-26 Adapter: Connect the E-26 quick connect adapter (provided) to the fixture's wiring. Then, screw the E-26 adapter into the existing socket of the recessed can.
- Selectați temperatura de culoare (CCT): Locate the CCT selection switch on the back of the downlight. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch.
- Instalați spotul de iluminat: Gently push the wiring and the E-26 adapter into the recessed can. Compress the spring clips on the sides of the downlight and insert the fixture into the can. Release the clips to secure the downlight flush against the ceiling.
- Restabiliți puterea: După ce spotul este instalat în siguranță, restabiliți alimentarea cu energie electrică la întrerupătorul de circuit.
Figure 3: Illustration of connecting the E-26 quick connect adapter to the downlight's wiring.
Figura 4: Spate view of the downlight, highlighting the CCT selection switch.
Figura 5: Detaliat view of the CCT switch, showing the five color temperature options.
Sfaturi de instalare:
- Tensiunea arcului: If the light does not stay flush, ensure the spring clips are properly engaged with the torsion clips inside the recessed can. Some older cans may require adjustment or the use of compatible mounting clips.
- Wire Clearance: Verify that internal wires within the can are not obstructing the downlight, which could prevent it from seating properly.
Instrucțiuni de operare
The Maxxima LED Downlight is designed for simple operation once installed.
Selectarea temperaturii culorii:
The color temperature is set using the switch on the back of the fixture during installation. To change the CCT after installation, you must carefully remove the fixture from the recessed can, adjust the switch, and then reinstall it. The available color temperatures are:
- 2700K: Alb moale
- 3000K: Alb Cald
- 3500K: Alb strălucitor
- 4000K: Neutral alb
- 5000K: Lumina zilei
Figure 6: Visual guide to the five selectable color temperatures provided by the downlight.
Funcționalitate de reglare a luminii:
This downlight is dimmable from 10% to 100% with compatible LED dimmers. Ensure your dimmer switch is rated for LED lighting to achieve optimal performance and avoid flickering or damage.
Întreţinere
The Maxxima LED Downlight requires minimal maintenance.
- curatenie: To clean the fixture, ensure power is off. Use a soft, dry, or slightly damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Fără înlocuire a becului: This fixture features an integrated LED, meaning no bulb replacement is necessary throughout its lifespan.
Depanare
If you encounter issues with your downlight, refer to the following common problems and solutions:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Lumina nu se aprinde. | No power, loose connection, faulty fixture. | Check circuit breaker. Verify E-26 adapter is securely screwed in and connections are tight. If problem persists, contact customer support. |
| Lumina pâlpâie sau se diminuează necorespunzător. | Variator incompatibil, cablaj slăbit. | Ensure dimmer is LED compatible. Check all electrical connections. |
| Light does not sit flush with the ceiling. | Spring clips not engaged, internal obstruction, insufficient spring tension. | Ensure spring clips are fully engaged with the can's torsion clips. Check for wires or insulation obstructing the fixture. Adjust spring tension if necessary by gently bending the springs closer together at the top. |
| Temperatură de culoare incorectă. | Comutatorul CCT este setat incorect. | Remove fixture, adjust CCT switch to desired setting, and reinstall. |
Specificații
| Caracteristică | Detaliu |
|---|---|
| Numele modelului | LMR-61505 |
| Marca | Maxxima |
| Dimensiunile produsului | 7.1 cm L x 7.1 cm l x 4.5 cm Î |
| Wattage | 15 wați |
| Luminozitate | 1300 lumeni |
| Temperatura de culoare | 2700K/3000K/3500K/4000K/5000K Selectable |
| CRI | 90 |
| Voltage | 120 volți (AC) |
| Reglabil | Yes (10% - 100%) |
| Unghiul fasciculului | 36° |
| Material | Aluminiu |
| Tip de instalare | Flush Mount (Retrofit for 5" & 6" cans) |
| Baza becului | E26 Quick Connect Adapter |
| Ore pe viață | 50,000 de ore |
| Certificari | ETL Listed, T20 California Compliant |
| Greutatea articolului | 1.5 lire sterline |
| Utilizare în interior/exterior | Interior (D)amp Evaluat) |
Informații despre garanție
The Maxxima MRL-61505 LED Downlight comes with a 3 an garanție from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Maxxima customer support.
Asistență pentru clienți
For technical assistance, troubleshooting, or warranty inquiries, please contact Maxxima customer support. Refer to the product packaging or the official Maxxima website pentru cele mai recente informații de contact.
