Manual de utilizare pentru scanerul de coduri de bare cu fir Zebra DS8108-SR

1. Introducere

The Zebra DS8108-SR is a high-performance handheld corded barcode scanner designed for efficient and accurate data capture in various work environments. It is capable of scanning both 1D and 2D barcodes, including those that are dense, poorly printed, crinkled, faded, distorted, dirty, damaged, or displayed on dimly lit electronic screens.

This manual provides essential information for setting up, operating, maintaining, and troubleshooting your DS8108-SR scanner to ensure optimal performance and longevity.

2. Caracteristici cheie

• Superior Scan Range: Offers a scanning range of up to 24 inches (61 cm), enhancing checkout speed and allowing for easy scanning of items in shopping carts without leaving the cash-wrap.
• Performanță de neegalat: Equipped with an 800 MHz microprocessor, a high-resolution megapixel sensor, and Zebra's exclusive PRZM Intelligent Imaging technology, it instantly captures even the most problematic barcodes.
• Multi-Code Data Formatting (MDF): Capable of capturing multiple barcodes with a single scan and transmitting only the required barcodes in the application's expected order, improving efficiency.
• Direct Decode Indicator: The illumination on the barcode flashes upon a successful decode, providing immediate visual confirmation and improving user productivity.
• Design durabil: Withstands multiple 6 ft./1.8m drops to concrete and is designed to endure 2,000 tumbles in a 1.5 ft./0.5 m tumbler, ensuring reliability in demanding environments.

3. Conținutul pachetului

Upon unpacking your Zebra DS8108-SR scanner, please verify that all the following items are included:

• One (1) Zebra DS8108-SR Barcode Scanner
• Un (1) cablu USB
• One (1) Instruction Manual

Figure 1: The Zebra DS8108-SR scanner shown with its included USB cable.

Figura 2: Un prim-plan view of the USB cable, featuring a standard USB-A connector on one end and an RJ45-style connector for the scanner on the other.

4. Configurare

Follow these steps to set up your Zebra DS8108-SR barcode scanner:

1. Conectați cablul USB: Insert the RJ45-style connector of the USB cable into the port at the base of the scanner handle.
2. Conectare la dispozitivul gazdă: Plug the USB-A connector of the cable into an available USB port on your computer or Point-of-Sale (POS) system.
3. Instalarea driverului (dacă este necesar): Your operating system should automatically detect and install the necessary drivers. If not, please refer to the Zebra support website pentru descărcări de drivere.
4. Testați scanerul: Open a text editor or a compatible application and scan a test barcode. The scanned data should appear in the application.

Figure 3: Interface diagram illustrating how to connect the scanner via USB to a computer or RS-232 to a power source and host.

5. Instrucțiuni de utilizare

The Zebra DS8108-SR is designed for intuitive operation:

1. Scanare manuală: Hold the scanner comfortably in your hand. Aim the scanning window at the barcode you wish to read.
2. Trigger Scan: Press the trigger button located on the handle. A red aiming pattern will project from the scanning window.
3. Successful Scan: Upon a successful scan, the scanner will emit an audible beep and the illumination on the barcode will flash, indicating that the data has been captured.
4. Distanța de scanare: For optimal performance, hold the scanner at an appropriate distance from the barcode, typically within its 24-inch (61 cm) range.

Figure 4: The Zebra DS8108-SR handheld scanner, ready for use.

Figura 5: lateral view of the scanner, highlighting its ergonomic design for comfortable handling.

Tipuri de coduri de bare acceptate

The DS8108-SR supports a wide array of 1D and 2D barcode symbologies, including but not limited to:

• 1D Barcodes: UPC/EAN, Code 39, Code 128, etc.
• 2D Barcodes: QR Code, Data Matrix, PDF417, MaxiCode, Aztec Code, etc.
• Specialized Barcodes: Damaged codes, poorly printed codes, crinkled codes, faded codes, distorted codes, dirty codes, reflective codes, and film-covered codes.

Figure 6: Visual representation of various barcode types supported by the DS8108-SR, including Maxi Code, Folding Code, Damage Code, PDF 417, Data Matrix, Film Covered Code, and Reflective Code.

Produs terminatview Video

6. Întreținere

Întreținerea corespunzătoare asigură longevitatea și performanța optimă a scanerului dumneavoastră:

• curatenie: Regularly clean the scanning window with a soft, lint-free cloth dampened with a mild, non-abrasive cleaner. Avoid harsh chemicals.
• Îngrijirea cablului: Inspect the USB cable periodically for any signs of wear or damage. Replace if necessary to prevent connectivity issues.
• Depozitare: Store the scanner in a clean, dry environment when not in use. Avoid extreme temperatures and direct sunlight.

7. Depanare

If you encounter issues with your DS8108-SR scanner, refer to the following common problems and solutions:

8. Specificații

• Model: DS8108-SR
• Dimensiuni: 6.6 in. H x 2.6 in. W x 4.2 in. D (16.8 cm H x 6.6 cm W x 10.7 cm D)
• Greutate: 5.4 oz. / 154 g
• Conectivitate: Corded (USB Cable)
• Supported Host Interfaces: USB, RS232, Keyboard Wedge, TGCS (IBM) 46XX over RS485
• Capacitate de decodare: 2-D & 1-D Barcodes
• Specificații picătură: Withstands multiple 6 ft. / 1.8m drops to concrete
• Caietul de sarcini: Designed to withstand 2,000 tumbles in 1.5 ft. / 0.5 m tumbler
• Graphics Format Support: Images can be exported as Bitmap, JPEG or TIFF
• Producător: Simbol

9. Garanție și asistență

For warranty information and technical support, please refer to the documentation provided with your product at the time of purchase or visit the official Zebra support website. Termenii specifici ai garanției pot varia în funcție de regiune și de comerciant.