Geniatech XPI-3566 Single Board Computer User Manual

1. Introducere

The Geniatech XPI-3566 is a high-performance single-board computer designed for various embedded applications. It features a Rockchip RK3566 processor with a built-in 0.8T NPU and up to 8GB of LPDDR4 RAM. This board supports multiple operating systems including Linux Debian10, Android 11, and Raspbian OS emulator, offering seamless migration capabilities for projects previously developed on Raspberry Pi platforms.

The XPI-3566 is equipped with a 40-pin GPIO extension interface, compatible with Raspberry Pi accessories, and supports 4K HDMI, MIPI-DSI, and MIPI-CSI display outputs. Integrated WiFi and wired network connections make it suitable for AI, machine learning, and multimedia applications.

Image 1.1: Geniatech XPI-3566 Single Board Computer, top view showing various ports and components.

2. Ghid de instalare

2.1 Hardware terminatview

Familiarize yourself with the various ports and components on the XPI-3566 board before proceeding with setup.

Image 2.1: Labeled diagram of the XPI-3566 board, highlighting HDMI OUT, MIPI-DSI, MIPI-CSI, Type C, LAN, USB 3.0, USB 2.0, and Extension GPIO.

2.2 Sursa de alimentare

Connect a compatible 5V power supply to the USB Type-C port. Ensure the power supply can provide sufficient current for stable operation, especially when connecting multiple peripherals.

2.3 Conexiune la afișaj

Connect your display device using one of the available interfaces:

• HDMI: For standard monitors and TVs.
• MIPI-DSI: For compatible display panels.
• MIPI-CSI: For compatible camera modules.

2.4 Conexiuni periferice

• Porturi USB: Connect keyboards, mice, and other USB devices to the USB 2.0 or USB 3.0 ports.
• Ethernet: For a wired network connection, plug an Ethernet cable into the LAN port.
• GPIO: The 40-pin GPIO header allows for connection to various sensors, actuators, and expansion boards. Refer to the pin definition table for details.

Image 2.2: Detailed pinout diagram for the 40-pin GPIO header, showing definitions for VCC, GND, I2C, UART, PWM, and other functions.

2.5 Instalarea sistemului de operare

The XPI-3566 supports Linux Debian10, Android 11, and Raspbian OS emulator. Installation typically involves flashing an image to the eMMC storage or a TF card. Detailed instructions for flashing the OS can be found on the Geniatech support website-ul.

3. Instrucțiuni de utilizare

3.1 Prima pornire

After connecting all necessary peripherals and flashing the operating system, connect the power supply. The board should boot automatically. Follow the on-screen prompts for initial setup of your chosen operating system.

3.2 Configurarea rețelei

The XPI-3566 supports both wired Ethernet and wireless WiFi/Bluetooth connectivity. Configure your network settings within the operating system's network manager. For WiFi, select your network and enter the password. For Bluetooth, pair with compatible devices.

3.3 Software Development and Applications

The XPI-3566 is designed for a wide range of applications, including:

• Programming Education
• Dezvoltare software
• Business Display Advertising Machines
• Touch Control All-in-one Machines
• Self-service Terminals
• Terminale multimedia

Its compatibility with Raspberry Pi's 40P GPIO and support for various operating systems facilitate diverse project development.

Imaginea 3.1: Examples of XPI-3566 application scenarios, including programming education, software development, and various terminal uses.

Image 3.2: Illustration of software customization options, showing logos for RaspbianOS simulator, Debian 10, and Android 11.

4. Întreținere

To ensure the longevity and optimal performance of your Geniatech XPI-3566, follow these maintenance guidelines:

• Păstra curat: Regularly clean the board to prevent dust accumulation, which can lead to overheating. Use compressed air or a soft brush.
• Evitați condițiile extreme: Operate the board within its specified temperature and humidity ranges. Avoid direct sunlight, excessive heat, or moisture.
• Ventilatie corespunzatoare: Ensure adequate airflow around the board, especially if it is enclosed in a case.
• Conexiuni sigure: Periodically check all cable connections (power, display, peripherals) to ensure they are secure.
• Actualizări de software: Keep your operating system and installed software updated to benefit from performance improvements and security patches.

5. Depanare

If you encounter issues with your XPI-3566, consider the following troubleshooting steps:

5.1 Fără alimentare/Fără pornire

• Verificați sursa de alimentare: Ensure the power adapter is correctly connected and provides the specified 5V output with sufficient current.
• Verificați conexiunile: Confirm all cables are securely plugged in.
• Re-flash OS: If the board does not boot, the operating system image might be corrupted. Try re-flashing the OS to the eMMC or TF card.

5.2 Probleme de afișare

• Verificare cablu: Ensure the HDMI, MIPI-DSI, or MIPI-CSI cable is properly connected to both the board and the display.
• Intrare afișare: Verify that your display is set to the correct input source.
• Setări de rezoluție: If you see a distorted image, the resolution might be incompatible. Try booting with a different display or accessing the OS via serial console to adjust settings.

5.3 Probleme de conectivitate la rețea

• Ethernet cu fir: Check the Ethernet cable and router connection. Verify network settings within the OS.
• WiFi/Bluetooth: Ensure the wireless module is enabled in the OS. Check WiFi network credentials and signal strength. For Bluetooth, ensure the device is discoverable.

5.4 Periferic nedetectat

• Dispozitive USB: Try connecting the device to a different USB port. Ensure the device drivers are installed in the operating system.
• GPIO Devices: Verify your wiring and software configuration for the GPIO pins. Consult the 40-pin header definition.

6. Specificații

Detailed technical specifications for the Geniatech XPI-3566 Single Board Computer:

Image 6.1: Performance comparison highlighting the RK3566 processor's features like 1.8GHz frequency and 0.8 TOPS NPU.

Image 6.2: Comparison of ROM write speed and RAM read/write speed, demonstrating increased performance with eMMC design.

7. Garanție și asistență

For warranty information and technical support, please refer to the official Geniatech website-ul web sau contactați direct serviciul lor de asistență pentru clienți. Păstrați bonul fiscal ca dovadă a achiziției.

Puteți găsi mai multe informații și resurse de asistență la Geniatech Store on Amazon.