Manual de utilizare pentru uscătorul de rufe cu pompă de căldură SHARP KD-NHA7S7PW21-DE

1. Introducere

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your SHARP KD-NHA7S7PW21-DE heat pump tumble dryer. Please read these instructions carefully before using the appliance and keep them for future reference.

Figura 1.1: Faţă view of the SHARP KD-NHA7S7PW21-DE heat pump tumble dryer. This image shows the appliance's overall design, including the control panel, door, and ventilation grille.

2. Informații de siguranță

Respectați întotdeauna măsurile de siguranță de bază atunci când utilizați aparate electrice pentru a reduce riscul de incendiu, electrocutare și vătămare corporală.

• Asigurați-vă că aparatul este împământat corespunzător.
• Nu permiteți copiilor să se joace cu uscătorul sau să îl folosească.
• Never dry items that have been soiled with flammable substances.
• Clean the lint filter after every cycle.
• Nu blocați orificiile de ventilație.
• Scoateți aparatul din priză înainte de curățare sau de efectuare a întreținerii.

3. Configurare și instalare

3.1 Despachetarea

Carefully remove all packaging materials. Inspect the dryer for any damage incurred during transit. Report any damage to your retailer immediately.

3.2 Plasarea

Place the dryer on a firm, level floor. Ensure there is adequate ventilation around the appliance. Do not install the dryer in a room where the temperature is likely to fall below 5°C, as this may affect its performance.

3.3 Conexiune electrică

Connect the dryer to a dedicated 220V power outlet. Do not use extension cords or multiple socket adapters. Ensure the plug is easily accessible after installation.

3.4 Drenarea condensului

This heat pump dryer collects water in a condensate tank. Ensure the tank is correctly seated. For continuous drainage, a drain hose can be connected to a suitable waste pipe (refer to the full installation guide for detailed instructions).

4. Instrucțiuni de utilizare

4.1 Încărcarea rufelor

Open the dryer door and load laundry into the drum. Do not overload the dryer; ensure clothes can tumble freely. Close the door firmly.

Figura 4.1: The dryer door open, revealing the stainless steel drum. This view is useful for understanding how to load and unload laundry.

4.2 Panoul de control pesteview

The control panel allows you to select programs and adjust settings.

Figura 4.2: Detaliat view of the digital control panel. It features a display, 'Start/Pause' button, and indicators for functions like anti-crease and drying level.

4.3 Selectarea programului

Turn the program dial to select the desired drying program based on fabric type and desired dryness level.

Figura 4.3: Close-up of the program selection dial with various drying options such as 'Extra Dry', 'Cupboard Dry', 'Iron Dry', 'Delicates', 'Jeans', and timed programs.

4.4 Pornirea unui ciclu

After selecting a program, press the 'Start/Pause' button to begin the drying cycle. The display will show the remaining time.

4.5 Sfârșitul ciclului

Uscătorul va semnala când ciclul este complet. Scoateți rufele imediat pentru a minimiza încrețiturile.asing. Clean the lint filter and empty the condensate tank after each use.

5. Întreținere

Întreținerea regulată asigură o performanță optimă și prelungește durata de viață a uscătorului dumneavoastră.

5.1 Curățarea filtrului de scame

The lint filter is located inside the door opening. Pull it out and remove any accumulated lint. Rinse under running water if necessary and ensure it is completely dry before reinserting.

5.2 Emptying the Condensate Tank

The condensate tank collects water extracted from the laundry. Empty it after every drying cycle. Pull out the tank, pour out the water, and reinsert it securely.

5.3 Curăţarea condensatorului

The condenser should be cleaned periodically (e.g., every few months) to maintain drying efficiency. Refer to the full user manual for specific instructions on accessing and cleaning the condenser unit.

5.4 Curățarea exterioară

Ștergeți exteriorul uscătorului cu un material moale, damp pânză. Nu utilizați agenți de curățare abrazivi sau solvenți.

6. Depanare

If you encounter problems with your dryer, consult the following table before contacting service.

7. Specificații

Key technical specifications for the SHARP KD-NHA7S7PW21-DE heat pump tumble dryer.

Figura 7.1: Technical data sheet providing detailed specifications and energy information for the appliance.

Figura 7.2: The energy label for the SHARP KD-NHA7S7PW21-DE, indicating its energy efficiency class, consumption, noise level, and capacity.

8. Garanție și asistență

Your SHARP KD-NHA7S7PW21-DE tumble dryer comes with a manufacturer's warranty. The minimum duration of the guarantee offered by the supplier is 24 months.

For warranty claims, technical support, or spare parts information, please contact SHARP customer service or visit their official website:

• Asistență clienți: https://sharphome.eu/pages/contact
• Spare Parts Information: https://sharphome.eu/pages/contact

Please have your model number (KD-NHA7S7PW21-DE) and purchase date available when contacting support.