Manual de utilizare pentru camerele de urmărire cu infraroșu Stealth Cam TS20 20MP

Introducere

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Stealth Cam TS20 20MP Infrared Trail Cameras. Designed for outdoor surveillance, these cameras capture high-quality images and videos with a 60 ft. detection range and a rapid 0.8-second trigger speed. Please read this manual thoroughly before using your cameras to ensure optimal performance and longevity.

Conținutul pachetului

Upon unpacking your Stealth Cam TS20 20MP Infrared Trail Cameras, please verify that all items listed below are present and in good condition:

• 2 x Stealth Cam TS20 20MP Infrared Trail Cameras
• Manual de instrucțiuni (acest document)
• Mounting Straps (typically included with trail cameras)

An image showing the packaging for two Stealth Cam TS20 20MP Infrared Trail Cameras. The cameras are visible through the clear plastic packaging, highlighting their camouflage design. Key features like '20.0 MEGAPIXEL', '0.8 SECOND TRIGGER SPEED', and '60 FOOT RANGE' are printed on the packaging.

Caracteristici cheie

The Stealth Cam TS20 cameras are equipped with advanced features for reliable outdoor monitoring:

• Rezoluție foto: 20 Megapixels for clear still images.
• Rezoluție video: 720P HD video recording.
• Viteza de declanșare: Ultra-fast 0.8-second trigger to capture fast-moving subjects.
• Detection & IR Range: 60 feet for both motion detection and infrared flash.
• LED Flash Type: Infrared for discreet night vision without visible light.
• Modul Burst: Captures 1-3 photos per trigger event.
• Timp de recuperare: Adjustable from 5 to 120 seconds between triggers.
• Imagine St.amp: Automatically stamps time, date, and moon phase on captured media.
• Quick Set Programming: Simplified setup for ease of use.
• Rezistenta la apa: Conceput să reziste la intemperii.

Înființat

1. Instalarea bateriei

1. Open the camera housing latch and swing open the front cover.
2. Localizați compartimentul bateriei.
3. Introduceți 8 baterii noi AA alcaline sau litiu, asigurându-vă că polaritatea este corectă (+/-), așa cum este indicată în interiorul compartimentului.
4. Închideți bine compartimentul bateriei.

2. Instalarea cardului SD

1. Cu camera oprită, localizați slotul pentru cardul SD.
2. Insert a formatted SD card (up to 32GB, not included) into the slot with the label facing up, until it clicks into place.
3. To remove, push the SD card in until it clicks, then release to eject.

3. Montarea camerei

The Stealth Cam TS20 is designed for tree mounting. Follow these steps:

1. Selectați un copac sau un stâlp robust la înălțimea dorită (de obicei, la 3-6 metri de sol).
2. Introduceți cureaua de montare furnizată prin fantele de pe spatele camerei.
3. Securely fasten the strap around the tree, ensuring the camera is stable and pointed towards the desired detection area.
4. Reglați unghiul camerei după cum este necesar.

Instrucțiuni de operare

1. Pornire/Oprire

• To power on, slide the power switch to the 'ON' position. The status LED will illuminate briefly.
• Pentru a opri, glisați comutatorul de alimentare în poziția „OPRIT”.

2. Quick Set Programming

The TS20 features a simple Quick Set programming switch for rapid deployment. Refer to the camera's internal display or specific Quick Set labels for available presets (e.g., Photo, Video, Burst). Select the desired mode using the switch.

3. Mod Foto

In Photo Mode, the camera captures still images at 20MP resolution when triggered by motion.

• Ensure the Quick Set switch is set to a Photo preset.
• The camera will automatically take a picture when motion is detected within its 60 ft. range.

4. Mod video

In Video Mode, the camera records 720P HD video clips when triggered.

• Set the Quick Set switch to a Video preset.
• Video recording duration can be set to 5 or 30 seconds, depending on the Quick Set option selected.
• The camera will record a video clip upon motion detection.

5. Mod Burst

Burst Mode allows the camera to capture multiple photos in quick succession per trigger event.

• If enabled via Quick Set, the camera will take 1 to 3 photos per trigger.
• This feature is useful for capturing more detailed sequences of animal movement.

6. Image Stamp

All captured photos and videos will have a data stamp including the time, date, and moon phase, providing valuable contextual information for your observations.

Întreţinere

Curatenie

• Periodically clean the camera lens and IR array with a soft, lint-free cloth. Avoid abrasive materials.
• Wipe the camera exterior with a damp cloth to remove dirt or debris. Do not submerge the camera in water.

Depozitare

• When not in use for extended periods, remove all batteries to prevent leakage and damage.
• Depozitați camera într-un loc răcoros și uscat, ferit de lumina directă a soarelui și de temperaturi extreme.

Depanare

If you encounter issues with your Stealth Cam TS20, refer to the following common solutions:

• Camera nu pornește:
  • Verificați orientarea bateriilor și asigurați-vă că bateriile sunt noi.
  • Verificați dacă întrerupătorul de alimentare este în poziția „ON”.
• Nicio fotografie/videoclip realizat:
  • Ensure an SD card is properly inserted and formatted.
  • Check if the camera is in the correct operating mode (Photo/Video).
  • Verify the detection area is clear of obstructions and within the 60 ft. range.
  • Adjust camera sensitivity if available.
• Calitate slabă a imaginii/videoului:
  • Clean the camera lens and IR array.
  • Asigurați-vă că aparatul foto este stabil și nu este supus mișcării.
  • Check for sufficient lighting conditions (for day images) or proper IR function (for night images).

Specificații

Garanție și suport

For detailed warranty information, product registration, or technical support, please visit the official Stealth Cam website or contact GSM Outdoors customer service. Keep your purchase receipt as proof of purchase for any warranty claims.

Producător: GSM Outdoors

Marca: Cameră Stealth

Website: www.stealthcam.com