1. Introducere
This manual provides essential information for the safe and effective installation, operation, and maintenance of your BTF-LIGHTING FCOB WS2814 IC RGBW LED Strip. This flexible, high-density LED strip features addressable RGBW (Red, Green, Blue, Natural White 4000K) lighting with individual IC control for dynamic chasing effects and uniform illumination. Please read this manual thoroughly before use.
2. Conținutul pachetului
Verificați dacă toate articolele enumerate mai jos sunt incluse în pachetul dumneavoastră:
- 1x FCOB WS2814 IC RGBW LED Strip (16.4FT / 5 meters, DC24V)
- 1x 3PIN Male Connector
- 3x Fixed Clips
- 2x Wire to Strip Connectors
Image 2.1: Contents of the BTF-LIGHTING FCOB WS2814 IC RGBW LED Strip package, including the LED strip, connectors, and mounting clips.
3. Caracteristicile produsului
- Addressable IC Control: Features WS2814 IC chips, with one IC controlling 56 LEDs, allowing for dynamic chasinefecte g.
- Iluminare RGBW: Offers a full spectrum of RGB colors plus a dedicated 4000K Natural White for versatile illumination.
- FCOB Technology: Flip Chip On Board (FCOB) design provides high density (784 LEDs/meter) for uniform, dot-free light output.
- Flexibil și tăiabil: The strip is flexible for various installations and can be cut at designated marks (every 2.8 inches / 71mm).
- High Brightness: Utilizes high-brightness LEDs for strong illumination while maintaining color consistency.
- Eficient energetic: Pure white light chasing effect is more energy-efficient compared to mixed white light.
- Double-Layer Copper PCB: Ensures better electronic conductivity and heat dissipation for extended lifespan.
Image 3.1: FCOB technology provides uniform light compared to traditional SMD LEDs, which can show individual light spots.
Image 3.2: The RGB+W design allows for pure white light, which is more energy-efficient than mixed white light from RGB-only strips.
4. Informații de siguranță
- This LED strip operates on DC24V. Ensure your power supply matches this voltage. Using an incorrect voltage will damage the strip.
- This product is rated IP30 for indoor use only. Do not expose to water or high humidity.
- Always disconnect power before installation, cutting, or making any connections.
- Do not bend the LED strip sharply or apply excessive force, as this may damage the internal circuitry.
- Ensure proper heat dissipation. Do not install the strip in enclosed spaces without adequate airflow.
- A nu se lăsa la îndemâna copiilor.
5. Configurare și instalare
5.1 Pregătirea suprafeței
Before installation, thoroughly clean and dry the desired mounting surface. The surface should be smooth, free of dust, oil, and moisture to ensure proper adhesion of the strip's self-adhesive backing.
5.2 Cutting and Linking
The LED strip can be cut to your desired length at the designated cut marks, which are located approximately every 2.8 inches (71mm). Use sharp scissors to ensure a clean cut. After cutting, you can use the included wire-to-strip connectors or solder wires directly to the copper pads for linking sections or connecting to a controller.
Image 5.1: Details of the WS2814 IC, addressable LED groups, and precise cut marks on the strip. Note the data direction arrow.
Image 5.2: The LED strip is flexible, cuttable, features double-sided adhesive, and can be secured with clips for various installation needs.
5.3 Montarea benzii LED
Peel off the protective backing from the double-sided adhesive tape on the back of the LED strip. Carefully press the strip onto the prepared surface, ensuring firm contact along its entire length. For added security, especially on vertical or uneven surfaces, use the provided fixed clips.
5.4 Conexiune electrică
This LED strip requires an external DC24V power supply and a compatible addressable LED controller (not included). The strip has 3PIN connectors (Data Input, 24V+, GND). Connect the strip to your controller according to the controller's instructions, ensuring correct polarity and data direction. The data direction is indicated by an arrow on the strip.
For longer runs or multiple strips, parallel wiring or the use of signal amplifiers may be necessary to prevent voltage drop and ensure consistent brightness and color. Refer to the connection diagrams below for guidance.
Imaginea 5.3: Example parallel connection diagram for multiple LED strips to a single power supply and controller.
Image 5.4: Detailed power supply connection options for LED strips, illustrating how voltage depends on the strip configuration.
6. Instrucțiuni de utilizare
The BTF-LIGHTING FCOB WS2814 IC RGBW LED Strip requires a compatible addressable LED controller for operation. This strip is compatible with various controllers such as K1000C, SP630E, SP639E, SP617E, SP530E WiFi Alexa controller, and other DIY controllers (e.g., based on ESP8266/ESP32 with WLED firmware, Raspberry Pi, Arduino UNO R3).
- Moduri dinamice: With a compatible controller, you can achieve various chasing effects, including RGB color chasing and pure white light chasing (3000K Warm White, 4000K Natural White, 6000K Cool White).
- Static Modes: Display static colors from a palette of 16 million colors, including various shades of white.
- Controlul luminozității: Adjust the brightness level via your controller.
Refer to the specific instruction manual of your chosen LED controller for detailed operating procedures, app usage, and programming options.
Imaginea 6.1: Examples of compatible controllers for the LED strip, including K1000C, SP630E, SP639E, SP617E, SP530E, Raspberry Pi, and Arduino UNO R3.
Video 6.1: Demonstration of the FCOB WS2814 IC RGBW LED strip's dynamic RGB chasing effects and pure white light chasing in various color temperatures (3000K, 4000K, 6000K), as well as static color modes.
7. Întreținere
- curatenie: Ștergeți ușor banda LED cu o cârpă uscată și moale pentru a îndepărta praful. Nu utilizați agenți de curățare lichizi sau materiale abrazive.
- Inspecţie: Periodically check connections for any signs of wear or damage. Ensure the strip remains securely attached to its surface.
- Depozitare: If removing the strip for storage, ensure it is clean and dry. Roll it loosely to prevent damage to the internal components.
8. Depanare
Dacă întâmpinați probleme cu banda LED, consultați următoarele probleme și soluții comune:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Banda LED nu se aprinde. | Fără alimentare, volum incorecttage, faulty connection, controller issue. | Verificați conexiunea sursei de alimentare și volumultage (DC24V). Verify all wiring connections are secure and correct. Ensure the controller is powered on and functioning. |
| Culori incorecte sau pâlpâire. | Incorrect data connection, controller settings, voltage picătură. | Ensure data line is connected correctly and follows the data direction arrow. Check controller settings for the correct IC type (WS2814) and pixel count. For long runs, consider parallel wiring or signal amplifiers to mitigate voltage picătură. |
| Doar o secțiune a benzii se aprinde. | Damage to the strip, faulty connection between sections. | Inspect the non-working section for physical damage. Check connections between strip segments. If a section is damaged, it may need to be replaced or bypassed. |
| Adhesive not holding. | Improper surface preparation, heavy strip. | Ensure surface is clean, dry, and smooth. Use the included fixed clips or additional mounting hardware for better security. |
For more specific troubleshooting related to controller functions, please consult the manual provided with your LED controller.
9. Specificații
| Caracteristică | Caietul de sarcini |
|---|---|
| Numărul de model | FCOB-24V-784L-W-IP30-SPI |
| Marca | BTF-LIGHTING |
| Tip LED | FCOB WS2814 IC RGBW |
| Temperatura de culoare (alb) | 4000K (alb natural) |
| Voltage | DC24V |
| Lungime | 16.4 FT (5 metri) |
| LED-uri pe metru | 784 LED-uri/m |
| IC Chips per Meter | 14 ICs/m (1 IC controls 56 LEDs) |
| Lățimea benzii | 10 mm (0.39 inchi) |
| Cut Mark Interval | 2.8 inchi (71 mm) |
| Sursa de alimentare | DC |
| Wattage | 76.8 watts (for 16.4FT) |
| Utilizare în interior/exterior | În interior (IP30) |
| Viață medie | 65,000 de ore |
| Indicele de redare a culorilor (CRI) | 90.00 |
10. Garanție și asistență pentru clienți
BTF-LIGHTING provides a 12 de luni garanție fără griji for this product. We are committed to ensuring your satisfaction. If you encounter any issues with your LED strip, require troubleshooting assistance, or have questions regarding purchase or installation, please do not hesitate to contact our 24/7 customer service. Our team is available to provide support and facilitate replacements if necessary.
For support, please visit the BTF-LIGHTING store on Amazon or contact us directly through the platform.
