SMALLRIG 4161-CF-FBA-US

Manual de instrucțiuni pentru cușca SmallRig Black Mamba pentru Canon EOS R6 Mark II

Model: 4161-CF-FBA-US

1. Introducere

This manual provides detailed instructions for the proper installation, operation, and maintenance of your SmallRig Black Mamba Camera Cage, designed specifically for the Canon EOS R6 Mark II camera. This cage offers enhanced protection and expands the mounting capabilities for various camera accessories, improving your filmmaking and photography experience.

SmallRig Black Mamba Camera Cage installed on a Canon EOS R6 Mark II camera

Figure 1.1: SmallRig Black Mamba Camera Cage on Canon EOS R6 Mark II.

2. Conținutul pachetului

Verificați dacă toate articolele sunt prezente în colet:

  • Camera Cage × 1
Diagram showing the SmallRig Black Mamba Camera Cage and its dimensions

Figura 2.1: Conținutul pachetului și dimensiunile produsului.

3. Caracteristici cheie

The SmallRig Black Mamba Camera Cage offers several key features:

  • Design simplificat: Provides comprehensive protection while maintaining access to all camera buttons and controls. Weighs only 158g (0.34 lbs).
  • Built-in Quick Release Plate: Features an Arca-Swiss compatible bottom plate for quick transitions between handheld, tripod, and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro stabilizer setups.
  • Anti-Twisting Mechanism: Securely locks the camera with a 1/4"-20 screw at the bottom and two side positioning blocks, preventing rotation. Integrated silicone pads protect the camera from scratches.
  • Opțiuni multiple de montare: Includes 1/4"-20 and 3/8"-16 threaded holes, ARRI locating holes, and a cold shoe mount for attaching various accessories like top handles, side handles, monitors, microphones, and LED lights.
  • Integrated Wrench: A built-in wrench facilitates easy mounting and removal.
  • QD Socket: Compatible with SmallRig handbands (e.g., PAC2456) and shoulder straps (e.g., PSC2428).

4. Configurare și instalare

Follow these steps to securely install the camera cage onto your Canon EOS R6 Mark II:

  1. Pasul 1: Align the camera with the cage. Use the built-in dual-head wrench to tighten the 1/4"-20 screw located at the bottom of the cage into the camera's tripod socket.
  2. Pasul 2: Secure the left side lock. Position the left side lock adapter into the camera's strap slot and ensure it is firmly seated.
  3. Pasul 3: Secure the right side lock. Position the right side lock adapter into the camera's strap slot and ensure it is firmly seated.

Ensure all screws and locks are tightened to prevent any movement or twisting of the camera within the cage. The integrated silicone pads provide additional protection against scratches.

Three-point locking design for camera cage installation

Figure 4.1: Three-Point Locking Design installation steps.

5. Instrucțiuni de utilizare

5.1 Quick Release Plate Functionality

The integrated Arca-Swiss compatible quick release plate on the bottom of the cage allows for rapid transitions between different shooting setups. This feature is compatible with DJI RS 2, RSC 2, RS 3, and RS 3 Pro stabilizers, as well as standard Arca-Swiss tripods.

Camera cage with quick release plate for easy scene switching between tripod and stabilizer

Figure 5.1: Quick and easy scene switching using the built-in Arca-Swiss plate.

5.2 Accessory Mounting Options

The cage provides numerous mounting points for expanding your camera rig:

  • Găuri filetate de 1/4"-20: Standard mounting points for a wide range of accessories.
  • Găuri filetate de 3/8"-16: Larger mounting points for heavier accessories or specific mounting standards.
  • Găuri de localizare ARRI: Designed to prevent twisting of accessories attached via 3/8"-16 screws, ensuring stability.
  • Suport pentru încălțăminte rece: Ideal for attaching microphones, LED video lights, or other cold shoe compatible accessories.
  • Wrist Strap Slot: For attaching wrist straps for added security during handheld operation.
  • QD Socket: Quick Detach socket for compatible handbands and shoulder straps.
Diagram illustrating various mounting points on the camera cage including threaded holes, ARRI locating holes, cold shoe, wrist strap slot, and QD socket

Figure 5.2: Extensive expansion capabilities with various mounting points.

A închide view of the wrist strap slot and QD socket on the camera cage

Figure 5.3: Detail of QD Socket and Wrist Strap Slot.

5.3 Accesorii recomandate

The cage is designed to integrate seamlessly with a range of SmallRig accessories to build a complete camera rig:

  • Top Handles (e.g., ID: 3765, 2165C)
  • Side Handles (e.g., ID: 4016)
  • Monitor Mounts (e.g., ID: 2903B)
  • Microphones (e.g., ID: 3487)
  • Follow Focus Systems (e.g., ID: 3010C)
  • Matte Boxes (e.g., ID: 3196)
  • V-Mount Battery Mounting Systems (e.g., ID: 4064)
  • Tripods (e.g., ID: 4059)
Example camera rig setup with SmallRig Black Mamba cage and various accessories including monitor, top handle, microphone, matte box, and tripod

Figure 5.4: Kit recommendation showing a fully accessorized camera rig.

6. Întreținere

To ensure the longevity and optimal performance of your SmallRig Black Mamba Camera Cage, follow these maintenance guidelines:

  • curatenie: Ștergeți cușca cu o cârpă moale și uscată pentru a îndepărta praful și amprentele. Pentru murdăria persistentă, ștergeți ușoramp Se poate folosi o lavetă, urmată de uscarea imediată. Evitați substanțele de curățare abrazive sau solvenții.
  • Depozitare: Store the cage in a dry, cool environment away from direct sunlight and extreme temperatures. If not in use for extended periods, consider storing it in its original packaging or a protective bag.
  • Inspecţie: Periodically check all screws and mounting points for tightness. Ensure the silicone pads are intact and providing adequate protection.

7. Depanare

If you encounter any issues with your camera cage, consider the following:

  • Cage feels loose on camera: Ensure the 1/4"-20 screw at the bottom and both side lock adapters are fully tightened. Refer to Section 4 for installation steps.
  • Accessories are not secure: Verify that accessories are attached to the correct mounting points (e.g., ARRI locating holes for anti-twist) and that their respective screws are tightened.
  • Difficulty attaching to stabilizer/tripod: Confirm that the quick release plate is correctly aligned with the Arca-Swiss clamp on your stabilizer or tripod. Ensure the clamp is fully open before insertion and securely closed afterward.

For further assistance, please contact SmallRig customer support.

8. Specificații

CaracteristicăDetaliu
Dimensiunile produsului153 × 73.9 × 114.5 mm (6.0 × 2.9 × 4.5 țoli)
Greutatea articolului158 g ± 5 g (5.6 ± 0.2 oz)
Dimensiuni pachet184 × 130 × 76 mm (7.2 × 5.1 × 3.0 țoli)
Greutatea pachetului238 g ± 5 g (8.4 ± 0.2 oz)
MaterialAliaj de aluminiu
CompatibilitateCanon EOS R6 Mark II
Puncte de montare1/4"-20 Threaded Holes, 3/8"-16 Threaded Holes, ARRI Locating Holes, Cold Shoe Mount, Wrist Strap Slot, QD Socket
Plăcuță de eliberare rapidăCompatibil Arca-Swiss
Numărul de model4161-CF-FBA-US

9. Garanție și asistență

SmallRig products are manufactured to high-quality standards. For information regarding warranty coverage, product registration, or technical support, please refer to the official SmallRig website-ul web sau contactați direct serviciul lor de asistență pentru clienți. Păstrați bonul fiscal ca dovadă a achiziției.

SmallRig Official Website: www.smallrig.com

Documente conexe - 4161-CF-FBA-US

Preview Instrucțiuni de utilizare pentru colivie SmallRig „Black Mamba” pentru Canon EOS R5 C / R5 / R6
Detailed operating instructions and specifications for the SmallRig "Black Mamba" Cage (Model 3233B), designed for Canon EOS R5 C, EOS R5, and EOS R6 cameras. Provides protection, accessory mounting options, and features like an Arca-Swiss plate and built-in screwdriver.
Preview Kit cușcă SmallRig „Black Mamba” pentru Canon EOS R5 Mark II (4975/4976) - Instrucțiuni de utilizare
Detailed operating instructions and specifications for the SmallRig "Black Mamba" Cage Kit designed for the Canon EOS R5 Mark II camera. Includes product details, installation steps for the cage, top handle, and cable clamp, along with compatibility information and manufacturer details.
Preview Placă de montare SmallRig MD5424 pentru AirTag pentru camerele Canon - Instrucțiuni de utilizare
Instrucțiuni detaliate de utilizare și specificații pentru placa de montare SmallRig MD5424 Arca-Swiss, concepută pentru camerele Canon EOS R5, R5 C, R5 Mark II, R6, R7 și R10. Dispune de Air integrat.Tag compartiment, sistem de eliberare rapidă și mai multe puncte de montare.
Preview Manual de utilizare SmallRig SR-RG1 Wireless Shooting Grip
Manual de utilizare pentru mânerul wireless SmallRig SR-RG1, care detaliază caracteristicile, compatibilitatea, instrucțiunile de asociere pentru camerele Sony și Canon, specificațiile produsului și informații despre garanție.
Preview SmallRig HDMI & USB-C Cable Clamp for Canon EOS R50 V Cage - Operating Instructions
Operating instructions for the SmallRig HDMI & USB-C Cable Clamp designed for the Canon EOS R50 V Cage. Includes installation steps, specifications, and manufacturer details.
Preview Instrucțiuni de utilizare pentru carcasa SmallRig pentru Insta360 X5
Instrucțiuni de utilizare pentru carcasa SmallRig concepută pentru camera Insta360 X5. Acest ghid detaliază caracteristicile, specificațiile și procesul de asamblare al produsului, evidențiind capacitățile sale de protecție și opțiunile de montare a accesoriilor.